Please wait a minute...
 
材料工程  2015, Vol. 43 Issue (3): 67-71    DOI: 10.11868/j.issn.1001-4381.2015.03.012
  测试与表征 本期目录 | 过刊浏览 | 高级检索 |
非晶增强铝基复合材料的微观结构及腐蚀性能
刘鹏1, 李士凯2, 张元彬1, 刘燕1
1. 山东建筑大学 材料科学与工程学院, 济南 250101;
2. 山东劳动职业技术学院, 济南 250022
Microstructure and Corrosion Properties of Aluminum Matrix Composite Reinforced with Al-based Amorphous
LIU Peng1, LI Shi-kai2, ZHANG Yuan-bin1, LIU Yan1
1. School of Materials Science and Engineering, Shandong Jianzhu University, Jinan 250101, China;
2. Shandong Labor Vocational and Technical College, Jinan 250022, China
全文: PDF(1929 KB)  
输出: BibTeX | EndNote (RIS)      
摘要 利用扫描电镜(SEM)、透射电镜(TEM)及电化学腐蚀等测试手段对搅拌摩擦加工制备获得的新型非晶增强铝基复合材料的微观组织结构及腐蚀性能进行实验研究。 实验结果表明,新型非晶增强铝基复合材料呈现典型的层状结构,且组织呈现一定的纳米级的超细晶结构,主要由α-Al及α-Al非晶结构组成的并伴有Al-Cu-Mg系析出相存在,与母材相比抗拉强度得到了较大的提高,而添加非晶形成的复合材料的电化学腐蚀性能相比未添加非晶基体材料加工后的腐蚀性能有所提高,但两种加工条件下材料的抗腐蚀性能均低于母材。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
刘鹏
李士凯
张元彬
刘燕
关键词 搅拌摩擦加工金属基复合材料微观组织腐蚀电子衍射    
Abstract:The microstructure and corrosion properties of a novel Al-based amorphous reinforced aluminum matrix composite fabricated by friction stir processing (FSP) were studied by scanning electron microscope(SEM), transmission electron microscope(TEM) and electrochemical corrosion test methods. The test results show that the composite exhibits the typical layered structure with a combination of the base metal and the amorphous strip via the FSP, and shows a large amount of nanosized ultrafine structure which are mainly composed of the α-Al and α-Al amorphous structure with Al-Cu-Mg series precipated phase existing in the composite. The tensile strength of composite is improved a lot compared with the base metal. The electrochemical corrosion behavior of the composite with amorphous strip is also improved compared with that without amorphous strip, but, in both cases, the corrosion bebaviour is lower than the base metal.
Key wordsfriction stir processing    metal matrix composite    microstructure    corrosion    electron diffraction
收稿日期: 2013-12-12     
1:  TB331  
基金资助:国家自然科学基金(51305240)
通讯作者: 刘鹏(1979-),男,副教授,博士,主要从事轻金属连接及表面强化技术研究,联系地址:济南市临港开发区凤鸣路山东建筑大学材料学院(250101),liupeng1286@163.com     E-mail: liupeng1286@163.com
引用本文:   
刘鹏, 李士凯, 张元彬, 刘燕. 非晶增强铝基复合材料的微观结构及腐蚀性能[J]. 材料工程, 2015, 43(3): 67-71.
LIU Peng, LI Shi-kai, ZHANG Yuan-bin, LIU Yan. Microstructure and Corrosion Properties of Aluminum Matrix Composite Reinforced with Al-based Amorphous. Journal of Materials Engineering, 2015, 43(3): 67-71.
链接本文:  
http://jme.biam.ac.cn/jme/CN/10.11868/j.issn.1001-4381.2015.03.012      或      http://jme.biam.ac.cn/jme/CN/Y2015/V43/I3/67
[1] 李文龙, 夏春, 邢丽, 等. 搅拌针形状对搅拌摩擦加工制备CNTs/铝基复合材料均匀性的影响[J].材料工程, 2014, (1): 75-78.LI Wen-long, XIA Chun, XING Li, et al. Influence of pin shape on homogeneity of CNTs distribution in CNTs/Al composite fabricated by friction stir processing[J]. Journal of Materials Engineering, 2014, (1):75-78.
[2] MISHRA R S, MA Z Y, CHARIT I. Friction stir processing: a novel technique for fabrication of surface composite[J]. Materials Science and Engineering A, 2003, 341 (1-2): 307-310.
[3] 骆蕾, 沈以赴, 李博, 等. 搅拌摩擦焊搭接法制备TC4钛合金表面Al涂层及其高温氧化行为[J]. 金属学报, 2013, 49 (8): 996-1002.LUO Lei, SHEN Yi-fu, LI Bo, et al. Preparation and oxidation behaviour of aluminized coating on TC4 titanium alloy via friction stir lap welding method[J]. Acta Metallurgica Sinica, 2013, 49 (8): 996-1002.
[4] EI-DANAF E A, EI-RAYES M M, SOlIMAN M S. Friction stir processing: An effective technique to refine grain structure and enhance ductility[J]. Materials and Design, 2010, 31 (3): 1231-1236.
[5] CAVALIERE P. Mechanical properties of friction stir processed 2618/Al2O3/20p metal matrix composite[J]. Composites Part A, 2005, 36 (12): 1657-1665.
[6] MORISADA Y, FUJII H, NAGAOKA T, et al. MWCNTs/AZ31 surface composites fabricated by friction stir processing[J]. Materials Science and Engineering A, 2006, 419 (1-2): 344-348.
[7] INOUE A. Stabilization of metallic super-cooled liquid and bulk amorphous alloys[J]. Acta Materialia, 2000, 48 (1): 279-306.
[8] TAKIGAWA Y, KOBATA J, CHUNG S W, et al. Microstructural change by friction stir processing in Zr-Al-Cu-Ni bulk metallic glass[J]. Materials Transactions, 2007, 48 (7): 1580-1583.
[9] KOBATA J, TAKIGAWA Y, HUNG S W, et al. Effects of size and volume fraction of precipitated crystalline phase induced by friction stir processing on hardness in Zr-Al-Ni-Cu bulk metallic glass[J]. Materials Transactions, 2007, 48 (9): 2409-2413.
[10] 刘鹏, 史清宇, 边秀房, 等. 新型非晶增强铝基复合材料的制备及组织性能[J]. 焊接学报, 2009, 30(10): 13-16. LIU Peng, SHI Qing-yu, BIAN Xiu-fang, et al. Microstructure of a novel Al-based amorphous reinforced aluminum metal matrix composite[J]. Transations of the China Welding Institution, 2009, 30 (10): 13-16.
[11] RHODES C G, MAHONEY M W, BINGEL W H, et al. Effects of friction stir welding on microstructure of 7075 aluminum[J]. Scripta Materialia, 1997, 36(1): 69-75.
[12] SU J Q, NELSON T W, STERLING C J. A new route to bulk nanocrystalline materials[J]. Journal of Materials Research, 2003, 18 (8): 1757-1760.
[13] JIANG X P, WANG X Y, LI J X, et al. Enhancement of fatigue and corrosion properties of pure Ti by sandblasting[J]. Materials Science and Engineering A, 2006, 429 (1-2): 30-35.
[1] 岳远杰, 唐荻, 武会宾, 梁金明, 巨彪. Nb对高含Cl-强酸性溶液环境中低合金钢腐蚀性能的影响[J]. 材料工程, 2015, 43(6): 14-20.
[2] 李敬勇, 刘涛, 郭宇文. 搅拌摩擦加工铝基复合材料的高温摩擦磨损性能[J]. 材料工程, 2015, 43(6): 21-25.
[3] 杨海青, 李青, 肖程波, 胡聘聘, 林山峰. Re及时效时间对耐腐蚀镍基定向合金组织和持久寿命的影响[J]. 材料工程, 2015, 43(6): 31-37.
[4] 胥聪敏, 杨东平, 张灵芝, 史立强, 李辉辉. SRB对X100钢在鹰潭土壤模拟溶液中腐蚀行为的影响[J]. 材料工程, 2015, 43(6): 71-78.
[5] 杨可, 杨克, 包晔峰. 氮合金化堆焊硬面合金的耐腐蚀性能研究[J]. 材料工程, 2015, 43(5): 33-37.
[6] 刘铭, 汝继刚, 臧金鑫, 张坤, 何维维, 王亮, 陈高红. 新型Al-Zn-Mg-Cu铝合金热稳定性研究[J]. 材料工程, 2015, 43(4): 13-18.
[7] 郝文魁, 刘智勇, 马岩, 杜翠薇, 李晓刚, 胡山山. 不同pH的碱性环境中16Mn钢及热影响区应力腐蚀行为[J]. 材料工程, 2015, 43(3): 28-34.
[8] 郑锐, 林建平, 吴倩倩, 吴泳荣. 结构胶胶接汽车车身金属接头抗环境腐蚀性能研究进展[J]. 材料工程, 2015, 43(3): 98-105.
[9] 周峰, 吴开明. 超快冷工艺对高铌X80管线钢抗腐蚀性能的影响[J]. 材料工程, 2015, 43(2): 67-72.
[10] 朱敏, 刘智勇, 杜翠薇, 李晓刚, 王丽叶. 交流电对X80钢在酸性土壤环境中腐蚀行为的影响[J]. 材料工程, 2015, 43(2): 85-90.
[11] 马少华, 回丽, 周松, 许良, 朱永辉. 腐蚀环境对预腐蚀铝合金腐蚀疲劳性能的影响[J]. 材料工程, 2015, 43(2): 91-95.
[12] 李万青, 魏红梅, 何鹏, 高丽娇, 林铁松, 李小强, 赫兰春. Ti3Al和Ti2AlNb合金扩散连接界面的组织及力学性能[J]. 材料工程, 2015, 43(1): 37-43.
[13] 李萍, 李安娜, 庞胜娇, 赵杰, 李廷举. Super304H抗碱金属硫酸盐的腐蚀行为[J]. 材料工程, 2015, 43(1): 54-58.
[14] 王艳晶, 柳乐, 宋玫锦. Y微合金化高铌TiAl基合金微观组织研究[J]. 材料工程, 2015, 43(1): 66-71.
[15] 俞树荣, 孟恺, 李淑欣. 空气和腐蚀环境下双相不锈钢SAF2507的疲劳性能[J]. 材料工程, 2015, 43(1): 77-81.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn