|
|
High temperature tribological properties of laser cladding in-situ carbide reinforced self-lubricating wear resistant composite coating |
WANG Yong-gang1, LIU He-jian1, HUI Li2, ZHI Shan-jie1, LIU Hai-qing1 |
1. Applied Technology College of Soochow University, Suzhou 215325, Jiangsu, China;
2. Key Laboratory of Fundamental Science for National Defense of Aeronautical Digital Manufacturing Process, Shenyang Aerospace University, Shenyang 110136, China |
|
|
Abstract The NiCrBSi-Ti3SiC2-CaF2-WC self-lubricating anti-wear composite coating was fabricated on TC11 alloy substrate by laser cladding. The phase compositions and microstructure were invest-igated by X-ray diffractometer (XRD), scanning electron microscope (SEM) and energy dispersive spectrometer (EDS). Microhardness was measured with a microhardness tester. Tribological proper-ties of the fabricated composite coatings were evaluated under dry sliding condition at room-temper-ature (25℃), 300℃ and 600℃, and the wear mechanism was analyzed. The results show that the mi-crostructure of the composite coatings consists of γ-Ni eutectic phase, M23C6,TiC, (Ti,W)C,Ti5Si3 hard phase and some Ti3SiC2,CaF2,TiF3 lubricating phase. The microhardness of laser cladding layer is improved greatly. The average microhardness of the laser cladding coating is 863.63HV0.2, which is 2.46 times of the matrix. The friction coefficient and wear rate are lower than that of the substrate. The lowest friction coefficient and wear rate are 0.275 and 4.8×10-5mm3·N-1·m-1 at 300℃, respectively.
|
Received: 13 April 2018
Published: 17 May 2019
|
|
|
|
|
[1] 林松盛,周克崧,代明江,等. 钛合金表面Ti-TiN-Zr-ZrN多层膜制备及性能[J]. 材料工程, 2017, 45(6):31-35. LIN S S, ZHOU K S, DAI M J, et al. Preparation and properties of Ti-TiN-Zr-ZrN multilayer films on titanium alloy surface[J]. Journal of Materials Engineering,2017,45(6):31-35.
[2] ZUMBO S, LEOFANTI J, CORRADI S, et al. Design of amall deployable satellite[J]. Acta Astronautica, 2003, 53(4/10):533-540.
[3] WENG F, CHEN C Z, YU H J. Research status of laser cladding on titanium and its alloys:a review[J]. Materials & Design, 2014, 58:412-425.
[4] WANG L, LI X X, ZHOU Y, et al. Relations of counterface materials with stability of tribo-oxide layer and wear behavior of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy[J]. Tribology International,2015,91:246-257.
[5] HUANG C B, DU L Z, ZHANG W G. Preparation and charac-terization of atmospheric plasma-sprayed NiCr/Cr3C2-BaF2·CaF2 composite coating[J]. Surface and Coatings Technology, 2009, 203(20/21):3058-3065.
[6] 韩杰阁,陈蔚泽,张浩,等. 钛合金表面耐磨性能及抗氧化性能的研究现状[J]. 电焊机, 2017,47(3):73-78. HAN J G, CHEN W Z, ZHANG H, et al. Research status of wear resistance and oxidation resistance of titanium alloy[J]. Electric Welding Machine, 2017, 47(3):73-78.
[7] WANG A H, ZHANG X L, ZHANG X F, et al. Ni-based alloy/submicron WS2 self-lubricating composite coating synthesized by Nd:YAG laser cladding[J]. Materials Science and Engineering:A, 2008, 475(1/2):312-318.
[8] ZHAO Z, CHEN J, TAN H, et al. Evolution of plastic deform-ation and its effect on mechanical properties of laser additive repa-ired Ti64ELI titanium alloy[J].Optics & Laser Technology,2017,92:36-43.
[9] LIU X B, MENG X J, LIU H Q, et al. Development and chara-cterization of laser clad high temperature self-lubricating wear resistant composite coatings on Ti-6Al-4V alloy[J]. Materials & Design, 2014, 55(6):404-409.
[10] PAUL C P, MISHRA S K, TIWARI P, et al. Solid-particle erosion behavior of WC/Ni composite clad layers with different contents of WC particles[J]. Optics & Laser Technology, 2013, 50:155-162.
[11] 董世运,闫世兴,徐滨士,等. 铸铁件激光熔覆NiCuFeBSi合金组织及力学性能[J]. 中国激光, 2012, 39(12):67-73. DONG S Y, YAN S X, XU B S, et al. Microstructure and mec-hanical property of NiCuFeBSi alloy with laser cladding on subs-trate of gray cast irons[J]. Chinese Journal of Lasers, 2012, 39(12):67-73.
[12] 毛星. H13钢耐磨减摩激光熔覆层材料及再制造研究[D]. 武汉:武汉理工大学, 2014. MAO X. Study on laser cladding wear-resistance antifriction material on H13 steel and remanufacturing[D]. Wuhan:Wuhan University of Technology, 2014.
[13] ZENG X, TAO Z, ZHU B, et al. Investigation of laser cladding ceramic-metal composite coatings:processing modes and mech-anisms[J]. Surface and Coatings Technology,1996,79(1):209-217.
[14] 刘秀波,王勉,乔世杰,等. TA2合金激光熔覆钛基自润滑耐磨复合涂层的高温摩擦学性能[J]. 摩擦学学报, 2018, 38(3):283-290. LIU X B, WANG M, QIAO S J, et al. High temperature tribo-logical properties of laser cladding titanium matrix self-lubri-cating wear resistant composite coating on TA2 alloy[J]. Tribo-logy, 2018, 38(3):283-290.
[15] LU X L, LIU X B, YU P C, et al. Synthesis and character-ization of Ni60-hBN high temperature self-lubricating anti-wear composite coatings on Ti6Al4V alloy by laser cladding[J]. Opt-ics & Laser Technology, 2016, 78:87-94.
[16] ZHANG X F, ZHANG X L, WANG A H, et al. Microstruct-ure and properties of HVOF sprayed Ni-based submicron WS2/CaF2, self-lubricating composite coating[J]. Transactions of Nonferrous Metals Society of China, 2009, 19(1):85-92.
[17] WANG X Y, ZHOU S F, DAI X Q, et al. Evaluation and mec-hanisms on heat damage of WC particles in Ni60/WC composite coatings by laser induction hybrid cladding[J]. International Journal of Refractory Metals and Hard Materials, 2017, 64:234-241.
[18] YAN H, ZHANG J, ZHANG P L, et al. Laser cladding of Co-based alloy/TiC/CaF2 self-lubricating composite coatings on copper for continuous casting mold[J]. Surface and Coatings Te-chnology, 2013, 232:362-369.
[19] 周圣丰,戴晓琴,郑海忠. 激光熔覆与激光-感应复合熔覆WC-Ni60A涂层的结构与性能特征[J]. 机械工程学报, 2012, 48(7):113-118. ZHOU S F, DAI X Q, ZHENG H Z. Characteristics on stru-cture and properties of WC-Ni60A coating by laser cladding and laser-induction hybrid cladding[J]. Journal of Mechanical Engineering, 2012, 48(7):113-118.
[20] LIU X B, ZHENG C, LIU Y F, et al. A comparative study of laser cladding high temperature wear-resistant composite coating with the addition of self-lubricating WS2 and WS2/(Ni-P) enca-psulation[J]. Journal of Materials Processing Technology, 2013, 213(1):51-58.
[21] 俞友军,周健松,陈建敏,等. 激光熔覆NiCr/Cr3C2-Ag-BaF2/CaF2金属基高温自润滑耐磨覆层的组织结构及摩擦学性能[J]. 中国表面工程, 2010, 23(3):64-69. YU Y J, ZHOU J S, CHEN J M, et al. Microstructure and tribological behavior of laser cladding NiCr/Cr3C2-Ag-BaF2/CaF2 self-lubrication wear-resistant metal matrix composite coat-ing[J]. China Surface Engineering, 2010, 23(3):64-69.
[22] LIU X B, LIU H Q, MENG X J, et al. Effects of aging treat-ment on microstructure and tribological properties of nickel-based high-temperature self-lubrication wear resistant composite coatings by laser cladding[J]. Materials Chemistry and Physics, 2014, 143(2):616-621. |
|
|
|