Please wait a minute...
 
材料工程  2016, Vol. 44 Issue (6): 104-109    DOI: 10.11868/j.issn.1001-4381.2016.06.016
  测试与表征 本期目录 | 过刊浏览 | 高级检索 |
N掺杂纳米TiO2/电气石复合材料的制备及其光催化性能
刘欣伟, 陈勇, 陈昌兵, 张文通
后勤工程学院 国防建筑规划与环境工程系, 重庆 401311
Preparation and Photocatalytic Activity of Nitrogen-doped Nano TiO2/Tourmaline Composites
LIU Xin-wei, CHEN Yong, CHEN Chang-bing, ZHANG Wen-tong
Department of National Defence Architectural Planning & Environmental Engineering, Logistic Engineering University, Chongqing 401311, China
全文: PDF(1721 KB)   HTML()
输出: BibTeX | EndNote (RIS)      
摘要 以钛酸丁酯为前驱体,尿素为N源,电气石为载体,采用超声辅助溶胶-凝胶法制备N掺杂纳米TiO2/电气石复合材料。采用XRD,FT-IR,UV-Vis DRS,SEM,EDS等测试技术对复合材料的结构和性能进行表征。分别考察煅烧温度、掺N量、电气石添加量、催化体系等因素对复合材料光催化性能的影响。结果表明:在煅烧温度为500℃,N掺杂量为5%(摩尔分数),电气石添加量为10%(质量分数),催化剂用量为3g/L,500W紫外灯照射条件下,N掺杂纳米TiO2/电气石复合材料光催化降解TNT(10mg/L)的效果最佳,且具有良好的再生利用性能。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
刘欣伟
陈勇
陈昌兵
张文通
关键词 N掺杂TiO2电气石复合材料光催化TNT    
Abstract:Using Ti(OC4H9)4 as precursor, CO(NH2)2 as nitrogen source, tourmaline as support, the nitrogen-doped nano TiO2/tourmaline composites were synthesized by sol-gel method with ultrasound assisted.The structure and performance of composites were characterized by XRD, FT-IR, UV-Vis DRS, SEM, EDS.The effects of calcining temperature, nitrogen-doped content, tourmaline amount, catalyst system on the photocatalytic activity of nitrogen-doped nano TiO2/tourmaline composites were studied.The results show that the photocatalytic activity of nitrogen-doped nano TiO2/tourmaline composites calcined under 500℃, the nitrogen doped amount of 5% (mole fraction), tourmaline added in an amount of 10% (mass fraction), catalyst dosage of 3g/L, under 500W UV light irradiation conditions, the photocatalytic degradation effect of TNT(10mg/L) is the best, and has a good recycling performance.
Key wordsnitrogen-doped    TiO2    tourmaline    composite    photocatalytic    TNT
收稿日期: 2015-10-15      出版日期: 2016-06-13
1:  X506  
通讯作者: 陈勇(1965-),男,教授,博士,现从事环境功能材料方向的研究,联系地址:重庆市沙坪坝区大学城后勤工程学院国防建筑规划与环境工程系(401311),E-mail:cydoc@sohu.com     E-mail: cydoc@sohu.com
引用本文:   
刘欣伟, 陈勇, 陈昌兵, 张文通. N掺杂纳米TiO2/电气石复合材料的制备及其光催化性能[J]. 材料工程, 2016, 44(6): 104-109.
LIU Xin-wei, CHEN Yong, CHEN Chang-bing, ZHANG Wen-tong. Preparation and Photocatalytic Activity of Nitrogen-doped Nano TiO2/Tourmaline Composites. Journal of Materials Engineering, 2016, 44(6): 104-109.
链接本文:  
http://jme.biam.ac.cn/CN/10.11868/j.issn.1001-4381.2016.06.016      或      http://jme.biam.ac.cn/CN/Y2016/V44/I6/104
[1] AYOUB K, HULLEBUSCH E D V, CASSIR M, et al. Application of advanced oxidation processes for TNT removal:A review[J]. Journal of Hazardous Materials, 2010, 178(1-3):10-28.
[2] LEE S Y, PARK S J. TiO2 photocatalyst for water treatment applications[J]. Journal of Industrial & Engineering Chemistry, 2013, 19(6):1761-1769.
[3] LEONG S, RAZMJOU A, WANG K, et al. TiO2 based photocatalytic membranes:a review[J]. Journal of Membrane Science, 2014, 472:167-184.
[4] MEHRJOUEI M, MULLER S, MULLER D. A review on photocatalytic ozonation used for the treatment of water and wastewater[J]. Chemical Engineering Journal, 2015, 263(1):209-219.
[5] 陈勇,谷锦,陈鹏,等.La、Fe共掺杂TiO2/膨润土的制备及其光催化性能[J].功能材料,2013,44(20):3003-3006. CHEN Y,GU J,CHEN P,et al.Preparation and properties of lanthanumand iron co-doped TiO2 bentonite composite photocatalyst[J].Journal of Functional Materials, 2013, 44(20):3003-3006.
[6] 赵宏生,郭子斌,李自强,等.氮掺杂TiO2纳米粉体的制备及其可见光催化性能[J].材料工程,2011,(3):16-19. ZHAO H S,GUO Z B,LI Z Q,et al. Preparation and visible light photocatalytic activity of nitrogen-doped nano-TiO2 powders[J]. Journal of Materials Engineering,2011,(3):16-19.
[7] 曹文斌,许军娜,刘文秀,等. 可见光活性氮掺杂纳米二氧化钛研究进展[J]. 材料工程, 2015, 43(3):83-90. CAO W B, XU J N, LIU W X,et al. Research progress on visible light active nitrogen doped nano-TiO2[J]. Journal of Materials Engineering, 2015, 43(3):83-90.
[8] SUN H S, MISOOK K. Decomposition of 2-chlorophenol using a tourmaline-photocatalytic system[J]. Journal of Industrial & Engineering Chemistry, 2008, 14(6):785-791.
[9] XU H Y, ZHUO Z, MAO G J. Enhanced photocatalytic discoloration of acid fuchsine wastewater by TiO2/schorl composite catalyst[J]. Journal of Hazardous Materials, 2010, 175(1-3):658-665.
[10] 刘欣伟,陈勇,陈昌兵,等.N掺杂改性纳米TiO2的制备及其光催化性能[J].后勤工程学院学报,2015,31(6):73-77. LIU X W,CHEN Y,CHEN C B,et al. Preparation and photocatalytic activity of nitrogen-doped modified nano TiO2[J].Journal of Logistical Engineering University, 2015,31(6):73-77.
[11] HJ 598-2011,水质梯恩梯的测定亚硫酸钠分光度法[S].
[12] 秦茜.TiO2/电气石复合催化剂的制备及其光催化性能研究[D].武汉:武汉理工大学,2013.
[13] MEIBNER T, EISENBEIB F, JASTORFF B. Visible-light photocatalysis in nitrogen-doped titanium oxides[J]. Science, 2001, 293(5528):269-271.
[14] LI G, GRAY K A. The solid-solid interface:Explaining the high and unique photocatalytic reactivity of TiO2-based nano composite materials[J]. Chemical Physics, 2007, 339(Suppl 1-3):173-187.
[15] 秦好丽,古国榜,柳松,等.尿素为氮源制备氮掺杂二氧化钛及其光催化性能[J].华南理工大学学报:自然科学版,2006,34(12):78-82. QIN H L, GU G B,LIU S,et al.Preparation and photocatalytic titania with urea as activity of nitrogen-doped nitrogen source[J].Journal of South China University of Technology:Natural Science Edition, 2006,34(12):78-82.
[16] MIYAUCHI M, IKEZAWA A, TOBIMATSU H, et al. Zeta potential and photocatalytic activity of nitrogen doped TiO2 thin films[J]. Physical Chemistry Chemical Physics, 2004, 6(4):865-870.
[17] 冀志江,金宗哲,梁金生.极性晶体电气石颗粒的电极性观察[J].人工晶体学报,2002,31(5):503-508. JI Z J, JIN Z Z, LIANG J S, et al. Observation of electric dipole on polar crystalline tourmaline granules[J]. Journal of Synthetic Crystals, 2002, 31(5):503-508.
[1] 张鉴炜, 石刚, 江大志. Buckypaper/环氧复合材料加压滤渗浸渍法制备工艺研究[J]. 材料工程, 2016, 44(7): 1-6.
[2] 刘皓, 李克智. C/C复合材料不同基体炭的微观结构[J]. 材料工程, 2016, 44(7): 7-12.
[3] 杨旭东, 邹田春, 陈亚军, 王付胜, 何小垒. 碳纳米管和氧化铝混杂增强铝基复合材料的制备及力学性能[J]. 材料工程, 2016, 44(7): 67-72.
[4] 查柏林, 林浩, 高双林, 罗雷, 张博文, 朱杰堂, 孙振生. 粒子浓度对C/C复合材料烧蚀行为的影响[J]. 材料工程, 2016, 44(7): 93-98.
[5] 梁银, 李朋, 裴旺, 段晋辉, 黄峰, 赵昆渝. 阳极氧化疏松钛膜制备高光催化活性的透明TiO2纳米多孔涂层[J]. 材料工程, 2016, 44(7): 99-106.
[6] 郑辉东. 3D氧化石墨烯纳米带-碳纳米管/TPU复合材料薄膜的制备与性能[J]. 材料工程, 2016, 44(6): 1-8.
[7] 张海军, 周储伟. 基于显微CT图像的细编穿刺碳/碳复合材料细观力学模型[J]. 材料工程, 2016, 44(5): 65-71.
[8] 张丹丹, 战再吉. 石墨烯/金属复合材料力学性能的研究进展[J]. 材料工程, 2016, 44(5): 112-119.
[9] 和欣辉, 韩小平. 纤维缠绕复合材料起伏区域残余应力[J]. 材料工程, 2016, 44(4): 76-81.
[10] 张晓云, 曹东, 陆峰, 刘建华. T700/5224复合材料在湿热环境和化学介质中的老化行为[J]. 材料工程, 2016, 44(4): 82-88.
[11] 陈昱, 王京钰, 李维尊, 鞠美庭. 新型二氧化钛基光催化材料的研究进展[J]. 材料工程, 2016, 44(3): 103-113.
[12] 于志强, 姜月. 颗粒填充环氧复合材料的摩擦学性能研究进展[J]. 材料工程, 2016, 44(3): 114-121.
[13] 王丹军, 申会东, 郭莉, 张洁, 付峰. 三维介孔Bi2WO6光催化剂的制备及无机离子对其光催化活性的影响[J]. 材料工程, 2016, 44(2): 8-16.
[14] 张洋, 宋博瀚, 闫久春. 超声波振动下SiC陶瓷颗粒与Zn-Al液态合金的相互作用机制[J]. 材料工程, 2016, 44(2): 28-34.
[15] 何卫, 王利民, 蔡炜, 汤超, 姚辉. 氮掺杂碳纳米管/铝基复合材料的制备及性能[J]. 材料工程, 2016, 44(2): 49-55.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn