Abstract：Fatigue life evaluation of retired parts is always one of the most difficult problems in remanufacturing engineering. Tension-tension fatigue experiments of precut groove sucker rod specimens were conducted, and on-line magnetic memory signals on the surfaces of specimens under different cyclic numbers were measured by magnetic memory testing instrument, and the variation regularities of the tangential amplitude and normal peak-peak value with different fatigue damage were exploited simultaneously. The Lissajous figure introduced shows that the surrounded area becomes larger, the largest and smaller finally, whilst the maximum closure area corresponds to the critical state of macroscopic crack about to unstable propagation. Furthermore, the maximum value of synthetic magnetic field gradient is proposed as an index to predict fatigue life. The results demonstrate that the characteristic parameter can reflect different development stages of fatigue cycles, and the quantitative relationship between the characteristic parameter and the normalized life is established by virtue of Gauss function, which can be used to predict the fatigue life of sucker rods.
冷建成, 张辉, 周国强, 吴泽民. 再制造抽油杆疲劳寿命评估的磁记忆检测实验研究[J]. 材料工程, 2016, 44(9): 103-108.
LENG Jian-cheng, ZHANG Hui, ZHOU Guo-qiang, WU Ze-min. Experimental Research on Predicting Fatigue Life of Remanufacturing Sucker Rod by Magnetic Memory Testing. Journal of Materials Engineering, 2016, 44(9): 103-108.
 徐滨士,张伟,马世宁,等.面向21世纪的绿色再制造[J].中国表面工程,1999,12(4):1-4.XU B S,ZHANG W,MA S N,et al.Green remanufacturing towards the 21st century[J].China Surface Engineering,1999,12(4):1-4.
 SMUROV I.Laser cladding and laser assisted direct manufacturing[J].Surface&Coatings Technology,2008,202(18):4496-4502.
 姜怀芳,杨芸,冯搏,等.再制造抽油杆高精度漏磁无损检测系统[J].石油机械,2014,42(1):79-83.JIANG H F,YANG Y,FENG B,et al.High-precision MFL nondestructive detection system for remanufactured sucker rod[J].China Petroleum Machinery,2014,42(1):79-83.
 何存富,李颖,吴斌,等.空心抽油杆的超声导波检测[J].无损检测,2005,27(10):538-541.HE C F,LI Y,WU B,et al.Ultrasonic inspection of hollow sucker rod by guided waves[J].Nondestructive Testing,2005,27(10):538-541.
 谭英杰,韩国有,董喜贵.抽油杆电涡流自动检测台设计[J].油气田地面工程,2008,27(12):34-36.TAN Y J,HAN G Y,DONG X G.Design of eddy current automatic test bench for sucker rod[J].Oil and Gas Field Surface Engineering,2008,27(12):34-36.
 DUBOV A A.A study of metal properties using the method of magnetic memory[J].Metal Science and Heat Treatment,1997,39(9):401-405.
 董世运,徐滨士,董丽虹,等.金属磁记忆检测技术用于再制造毛坯寿命预测的试验研究[J].中国表面工程,2006,19(5):71-75.DONG S Y,XU B S,DONG L H,et al.Experiment research on metal magnetic memory methods for life prediction of remanufacturing old parts[J].China Surface Engineering,2006,19(5):71-75.
 DONG L H,XU B S,XUE N,et al.Development of remaining life prediction of crankshaft remanufacturing core[J].Advances in Manufacturing,2013,1(1):91-96.
 徐成.基于磁记忆技术的再造抽油杆检测与评估[D].大庆:东北石油大学,2012.XU C.Detection and evaluation of remanufactured pumping rod based on magnetic memory monitoring technique[D].Daqing:Northeast Petroleum University,2012.
 LENG J C,XU M Q,ZHOU G Q,et al.Effect of initial remanent states on the variation of magnetic memory signals[J].NDT&E International,2012,52:23-27.
 任吉林,孙金立,周培,等.磁记忆二维检测的研究与工程应用[J].机械工程学报,2013,49(22):9-15.REN J L,SUN J L,ZHOU P,et al.Engineering application prospect and research on magnetic memory in two-dimensional testing[J].Journal of Mechanical Engineering,2013,49(22):9-15.
 周培,任吉林,孙金立,等.李萨如图在磁记忆二维定量检测中的应用[J].航空学报,2013,34(8):1990-1997.ZHOU P,REN J L,SUN J L,et al.Application of Lissajous figure in two-dimensional magnetic memory detection[J].Acta Aeronautica et Astronautica Sinica,2013,34(8):1990-1997.
 WANG H P,DONG L H,DONG S Y,et al.Fatigue damage evaluation by metal magnetic memory testing[J].Journal of Central South University,2014,21(1):65-70.
 DONG L H,XU B S,DONG S Y,et al.Monitoring fatigue crack propagation of ferromagnetic materials with spontaneous abnormal magnetic signals[J].International Journal of Fatigue,2008,30(9):1599-1605.
 金宝,邸新杰,张建军,等.疲劳裂纹扩展的金属磁记忆信号特征[J].材料工程,2014,(11):102-106.JIN B,DI X J,ZHANG J J,et al.Metal magnetic memory signal feature of fatigue cracking propagation[J].Journal of Materials Engineering,2014,(11):102-106.