|
|
Progress in preparation and application of carbon nanotube composites based on MOFs |
QIAO Jun-yu, LI Xiu-tao |
Key Laboratory of Civil Aviation Thermal Hazards Management and Emergency Response, Civil Aviation University of China, Tianjin 300300, China |
|
|
Abstract Carbon nanotubes(CNTs), as an important discovery in the research of nanomaterials, have become a research hotspot in the field of carbon materials since their birth. With its unique porous structure, metal-organic frameworks (MOFs) has been developed into one of the frontiers of research in recent years. With the continuous development of materials science in recent years, the research on composite technology of materials with different functional characteristics has become one of the main methods to solve key problems in the field of materials applications.CNTs and MOFs are two very important types of nanomaterials in the current material field. Combining the high electrical conductivity of CNTs with the high specific surface area and rich pore distribution characteristics of MOFs through composite technology is an inevitable trend for future research and application in the field of materials. In this paper, the main composite forms and preparation methods of MOFs and CNTs in recent years were reviewed, and the latest research progress of composites in the fields of supercapacitors, lithium battery electrodes, catalysis, adsorption, etc. was summarized. The synergistic improvement of the performance of the two materials was discussed and analyzed, and it was pointed out that the composite of CNTs and MOFs materials and the growth and distribution of CNTs have a high degree of randomness, and further control of them is the focus of future technical research.
|
Received: 01 July 2020
Published: 17 September 2021
|
|
|
|
|
[1] IIJIMA S. Helical microtubules of graphitic carbon[J]. Nature, 1991, 354(6348):56-58. [2] PENG B, LOCASCIO M, ZAPOL P, et al. Measurements of near-ultimate strength for multiwalled carbon nanotubes and irradiation-induced crosslinking improvements[J]. Nature Nanotechno-logy, 2008, 3(10):626-631. [3] WEI B Q, VAJTAI R, AJAYAN P M. Reliability and current ca-rrying capacity of carbon nanotubes[J]. Applied Physics Letters, 2001, 79(8):1172-1174. [4] POP E, MANN D, WANG Q, et al. Thermal conductance of an individual single-wall carbon nanotube above room temperature[J]. Nano Letters, 2006, 6(1):96-100. [5] De VOLDER M F L, TAWFICK S H, BAUGHMAN R H, et al. Carbon nanotubes:present and future commercial applications[J]. Science, 2013, 339(6119):535-539. [6] ZHANG Q, HUANG J Q, QIAN W Z, et al. The road for nanomaterials industry:a review of carbon nanotube production, post-treatment, and bulk applications for composites and energy storage[J]. Small, 2013, 9(8):1237-1265. [7] O’CONNELL M J. Carbon nanotubes:properties and applications[M]. Boca Raton, USA:CRC Press, 2006:19-26. [8] ARORA N, SHARMA N N. Arc discharge synthesis of carbon nanotubes:comprehensive review[J]. Diamond and Related Materials, 2014, 50:135-150. [9] CAO Q, KIM H, PIMPARKAR N, et al. Medium-scale carbon nanotube thin-film integrated circuits on flexible plastic substrates[J]. Nature, 2008, 454(7203):495-500. [10] FRANKLIN A D. Electronics:the road to carbon nanotube transistors[J]. Nature, 2013, 498(7455):443-444. [11] LI S, LIU C, HOU P X, et al. Enrichment of semiconducting single-walled carbon nanotubes by carbothermic reaction for use in all-nanotube field effect transistors[J]. ACS Nano, 2012, 6(11):9657-9661. [12] UPADHYAYULA V K K, DENG S, MITCHELL M C, et al. Application of carbon nanotube technology for removal of contaminants in drinking water:a review[J]. Science of the Total Environment, 2009, 408(1):1-13. [13] TOFIGHY M A, MOHAMMADI T. Adsorption of divalent heavy metal ions from water using carbon nanotube sheets[J]. Journal of Hazardous Materials, 2011, 185(1):140-147. [14] LIU X, WANG M, ZHANG S, et al. Application potential of carbon nanotubes in water treatment:a review[J]. Journal of Environmental Sciences, 2013, 25(7):1263-1280. [15] APUL O G, KARANFIL T. Adsorption of synthetic organic contaminants by carbon nanotubes:a critical review[J]. Water Research, 2015, 68:34-55. [16] WARIS O, TAO L. A review:carbon nanotube-based piezoresistive strain sensors[J]. Journal of Sensors, 2012, 2012:1-15. [17] MEYYAPPAN M. Carbon nanotube-based chemical sensors[J]. Small, 2016, 12(16):2118-2129. [18] NOKED M, OKASHY S, ZIMRIN T, et al. Composite carbon nanotube/carbon electrodes for electrical double-layer super capacitors[J]. Angewandte Chemie International Edition, 2012, 51(7):1568-1571. [19] SALVATIERRA R V, ZAKHIDOV D, SHA J, et al. Graphene carbon nanotube carpets grown using binary catalysts for high-performance lithium-ion capacitors[J]. ACS Nano, 2017, 11(3):2724-2733. [20] BYEON A, GLUSHENKOV A M, ANASORI B, et al. Lithium-ion capacitors with 2D Nb2CTx (MXene)-carbon nanotube electrodes[J]. Journal of Power Sources, 2016, 326:686-694. [21] VARDHARAJULA S, ALI S Z, TIWARI P M, et al. Func-tionalized carbon nanotubes:biomedical applications[J]. Interna-tional Journal of Nanomedicine, 2012, 7:5361-5374. [22] SAJID M I, JAMSHAID U, JAMSHAID T, et al. Carbon nanotubes from synthesis to in vivo biomedical applications[J]. International Journal of Pharmaceutics, 2016, 501(1/2):278-299. [23] GOHARDANI O, ELOLA M C, ELIZETXEA C. Potential and prospective implementation of carbon nanotubes on next generation aircraft and space vehicles:a review of current and expected applications in aerospace sciences[J]. Progress in Aerospace Sciences, 2014, 70:42-68. [24] BAKSHI S R, LAHIRI D, AGARWAL A. Carbon nanotube reinforced metal matrix composites-a review[J]. International Materials Reviews, 2010, 55(1):41-64. [25] 赵冬梅, 李振伟, 刘领弟, 等.石墨烯/碳纳米管复合材料的制备及应用进展[J]. 化学学报, 2014, 72(2):185-200. ZHAO D M, LI Z W, LIU L D, et al. Progress of preparation and application of graphene/carbon nanotube composite materials[J]. Acta Chimica Sinica, 2014, 72(2):185-200. [26] PRASEK J, DRBOHLAVOVA J, CHOMOUCKA J, et al. Methods for carbon nanotubes synthesis[J]. Journal of Materials Chemistry, 2011, 21(40):15872-15884. [27] 练澎, 张小凤.碳纳米管制备方法的研究进展[J]. 当代化工, 2015, 44(4):737-739. LIAN P, ZHANG X F. Research progress in preparation methods of carbon nanotubes[J]. Contemporary Chemical Industry, 2015, 44(4):737-739. [28] SALUNKHE R R, KANETI Y V, KIM J, et al. Nanoarchitectures for metal-organic framework-derived nanoporous carbons toward supercapacitor applications[J]. Accounts of Chemical Research, 2016, 49(12):2796-2806. [29] XIA W, MAHMOOD A, ZOU R, et al. Metal-organic frameworks and their derived nanostructures for electrochemical energy storage and conversion[J]. Energy & Environmental Science, 2015, 8(7):1837-1866. [30] XUE Y, ZHENG S, XUE H, et al. Metal-organic framework composites and their electrochemical applications[J]. Journal of Materials Chemistry A, 2019, 7(13):7301-7327. [31] DANG S, ZHU Q L, XU Q. Nanomaterials derived from metal-organic frameworks[J]. Nature Reviews Materials, 2017, 3(1):1-14. [32] KHAN N A, HASAN Z, JHUNG S H. Adsorptive removal of hazardous materials using metal-organic frameworks (MOFs):a review[J]. Journal of Hazardous Materials, 2013, 244:444-456. [33] FALCARO P, RICCO R, YAZDI A, et al. Application of metal and metal oxide nanoparticles@MOFs[J]. Coordination Chemistry Reviews, 2016, 307:237-254. [34] SONG Z, CHENG N, LUSHINGTON A, et al. Recent progress on MOF-derived nanomaterials as advanced electrocatalysts in fuel cells[J]. Catalysts, 2016, 6(8):116. [35] JIAO L, WANG Y, JIANG H L, et al. Metal-organic frameworks as platforms for catalytic applications[J]. Advanced Materials, 2018, 30(37):1703663. [36] KANG Y S, LU Y, CHEN K, et al. Metal-organic frameworks with catalytic centers:from synthesis to catalytic application[J]. Coordination Chemistry Reviews, 2019, 378:262-280. [37] 刘志强, 黄永清, 孙为银.金属有机框架化合物对溶剂分子和有机小分子荧光识别与传感研究进展[J]. 无机化学学报, 2017, 33(11):1959-1969. LIU Z Q, HUANG Y Q, SUN W Y.Progress in fluorescent re-cognition and sensing of solvent and small organic molecules based on metal-organic frameworks[J]. Chinese Journal of Inorganic Chemistry, 2017, 33(11):1959-1969. [38] KUMAR P, DEEP A, KIM K H. Metal organic frameworks for sensing applications[J]. TrAC Trends in Analytical Chemistry, 2015, 73:39-53. [39] ZHANG Y, YUAN S, DAY G, et al. Luminescent sensors based on metal-organic frameworks[J]. Coordination Chemistry Reviews, 2018, 354:28-45. [40] KOTZABASAKI M, FROUDAKIS G E. Review of computer simulations on anti-cancer drug delivery in MOFs[J]. Inorganic Chemistry Frontiers, 2018, 5(6):1255-1272. [41] BAHRANI S, HASHEMI S A, MOUSAVI S M, et al. Zinc-based metal-organic frameworks as nontoxic and biodegradable platforms for biomedical applications: review study[J]. Drug Metabolism Reviews, 2019, 51(3):356-377. [42] LIU Y, LI G, GUO Y, et al. Flexible and binder-free hierarchical porous carbon film for supercapacitor electrodes derived from MOFs/CNT[J]. ACS Applied Materials & Interfaces, 2017, 9(16):14043-14050. [43] HUANG G, ZHANG F, DU X, et al. Metal organic frameworks route to in situ insertion of multiwalled carbon nanotubes in Co3O4 polyhedra as anode materials for lithium-ion batteries[J]. ACS Nano, 2015, 9(2):1592-1599. [44] ANSARI S N, SARAF M, GUPTA A K, et al. Functionalized Cu-MOF@ CNT hybrid: synthesis, crystal structure and applicability in supercapacitors[J]. Chemistry-an Asian Journal, 2019, 14(20):3566-3571. [45] GE L, WANG L, RUDOLPH V, et al. Hierarchically structured metal-organic framework/vertically-aligned carbon nanotubes hybrids for CO2 capture[J]. RSC Advances, 2013, 3(47):25360-25366. [46] ZHANG H, WANG Y, ZHAO W, et al. MOF-derived ZnO na-noparticles covered by N-doped carbon layers and hybridized on carbon nanotubes for lithium-ion battery anodes[J]. ACS App-lied Materials & Interfaces, 2017, 9(43):37813-37822. [47] ZHOU W J, LU J, ZHOU K, et al. CoSe2 nanoparticles embedd-ed defective carbon nanotubes derived from MOFs as efficient electrocatalyst for hydrogen evolution reaction[J]. Nano Energy, 2016, 28:143-150. [48] ZHOU H, HE D, SAANA A I, et al. Mesoporous-silica induced doped carbon nanotube growth from metal-organic frameworks[J]. Nanoscale, 2018, 10(13):6147-6154. [49] MA L, WANG R, LI Y H, et al. Apically Co-nanoparticles-wrapped nitrogen-doped carbon nanotubes from a single-source MOF for efficient oxygen reduction[J]. Journal of Materials Chemistry A, 2018, 6(47):24071-24077. [50] XIA B Y, YAN Y, LI N, et al. A metal-organic framework-derived bifunctional oxygen electrocatalyst[J]. Nature Energy, 2016, 1(1):1-8. [51] YANG J, GUO J, GUO X, et al. In-situ growth carbon nanotubes deriving from a new metal-organic framework for high-performance all-solid-state supercapacitors[J]. Materials Letters, 2019, 236:739-742. [52] ZOU K Y, LIU Y C, JIANG Y F, et al. Benzoate acid-dependent lattice dimension of Co-MOFs and MOF-derived CoS2@CNTs with tunable pore diameters for supercapacitors[J]. Inorganic Chemistry, 2017, 56(11):6184-6196. [53] YUE H, SHI Z, WANG Q, et al. In situ preparation of cobalt doped ZnO@C/CNT composites by the pyrolysis of a cobalt doped MOF for high performance lithium ion batteries[J]. RSC Advances, 2015, 5(92):75653-75658. [54] ZHAO J, LIU C, DENG H, et al. In-situ catalytic growth carbon nanotubes from metal organic frameworks for high performance lithium-sulfur batteries[J]. Materialstoday Energy, 2018, 8:134-142. [55] AIJAZ A, MASA J, RÖSLER C, et al. MOF-templated assembly approach for Fe3C nanoparticles encapsulated in bamboo-like N-doped CNTs:highly efficient oxygen reduction under acidic and basic conditions[J]. Chemistry-a European Journal, 2017, 23(50): 12125-12130. [56] LI J S, LI S L, TANG Y J, et al. Nitrogen-doped Fe/Fe3C@ graphitic layer/carbon nanotube hybrids derived from MOFs:efficient bifunctional electrocatalysts for ORR and OER[J]. Chemical Communications, 2015, 51(13):2710-2713. [57] KIM J, YOUNG C, LEE J, et al. CNTs grown on nanoporous carbon from zeolitic imidazolate frameworks for supercapacitors[J]. Chemical Communications, 2016, 52(88):13016-13019. [58] INAGAKI M, KONNO H, TANAIKE O. Carbon materials for electrochemical capacitors[J]. Journal of Power Sources, 2010, 195(24):7880-7903. [59] 亢敏霞, 周帅, 熊凌亨, 等. 金属有机骨架在超级电容器方面的研究进展[J]. 材料工程, 2019, 47(8):1-12. KANG M X, ZHOU S, XIONG L H, et al. Research progress of metal organic framework in supercapacitors[J]. Journal of Materials Engineering, 2019, 47(8):1-12. [60] ZHANG Y, LIN B, SUN Y, et al. Carbon nanotubes@ metal-organic frameworks as Mn-based symmetrical supercapacitor electrodes for enhanced charge storage[J]. RSC Advances, 2015, 5(72):58100-58106. [61] WANG Y S, CHEN Y C, LI J H, et al. Toward metal-organic-framework-based supercapacitors:room-temperature synthesis of electrically conducting MOF-based nanocomposites decorated with redox-active manganese[J]. European Journal of Inorganic Chemistry, 2019(26):3036-3044. [62] WEN P, GONG P, SUN J, et al. Design and synthesis of Ni-MOF/CNT composites and rGO/carbon nitride composites for an asymmetric supercapacitor with high energy and power density[J]. Journal of Materials Chemistry A, 2015, 3(26):13874-13883. [63] TAN S, LI J, ZHOU L, et al. A new strategy for the improvement of direct use of MOFs as supercapacitor electrodes[J]. Materials Letters, 2019, 251:102-105. [64] YANG J, LI P, WANG L, et al. In-situ synthesis of Ni-MOF@CNT on graphene/Ni foam substrate as a novel self-supporting hybrid structure for all-solid-state supercapacitors with a high energy density[J]. Journal of Electroanalytical Chemistry, 2019, 848:113301. [65] GU J, SUN L, ZHANG Y, et al. MOF-derived Ni-doped CoP@C grown on CNTs for high-performance supercapacitors[J]. Che-mical Engineering Journal, 2020, 385:123454. [66] ZHANG Y, LIN B, WANG J, et al. All-solid-state asymmetric supercapacitors based on ZnO quantum dots/carbon/CNT and porous N-doped carbon/CNT electrodes derived from a single ZIF-8/CNT template[J]. Journal of Materials Chemistry A, 2016, 4(26):10282-10293. [67] DAI R, SUN W, LV L P, et al. Bimetal-organic-framework derivation of ball-cactus-like Ni-Sn-P@C-CNT as long-cycle anode for lithiumion battery[J]. Small, 2017, 13(27):1700521. [68] ZHU P, ZHANG Z, ZHAO P, et al. Rational design of intertwined carbon nanotubes threaded porous CoP@ carbon nanocubes as anode with superior lithium storage[J]. Carbon, 2019, 142:269-277. [69] LI C, XI Z, DONG S, et al. CNTs/MOFs-derived carbon/Al2(OH)2.76F3.24/S cathodes for high-performance lithium-sulfur batteries[J]. Energy Storage Materials, 2018, 12:341-351. [70] JIN J, ZHENG Y, KONG L B, et al. Tuning ZnSe/CoSe in MOF-derived N-doped porous carbon/CNTs for high-performance lithium storage[J]. Journal of Materials Chemistry A, 2018, 6(32):15710-15717. [71] DAU H, LIMBERG C, REIER T, et al. The mechanism of water oxidation: from electrolysis via homogeneous to biological cataly-sis [J]. ChemCatChem, 2010, 2(7):724-761. [72] FANG Y, LI X, LI F, et al. Self-assembly of cobalt-centered metal organic framework and multiwalled carbon nanotubes hybrids as a highly active and corrosion-resistant bifunctional oxygen catalyst[J]. Journal of Power Sources, 2016, 326:50-59. [73] TAN B, WU Z F, XIE Z L. Fine decoration of carbon nanotubes with metal organic frameworks for enhanced performance in supercapacitance and oxygen reduction reaction[J]. Science Bulletin, 2017, 62(16):1132-1141. [74] PARK S K, KANG Y C. MOF-templated N-doped carbon-coated CoSe2 nanorods supported on porous CNT microspheres with excellent sodium-ion storage and electrocatalytic properties[J]. ACS Applied Materials & Interfaces, 2018, 10(20):17203-17213. [75] ZHANG X, DONG P, LEE J I, et al. Enhanced cycling perfor-mance of rechargeable Li-O2 batteries via LiOH formation and decomposition using high-performance MOF-74@CNTs hybrid catalysts[J]. Energy Storage Materials, 2019, 17:167-177. [76] GAO Y, LV Z, GAO R, et al. Oxidative desulfurization process of model fuel under molecular oxygen by polyoxometalate loaded in hybrid material CNTs@MOF-199 as catalyst[J]. Journal of Hazardous Materials, 2018, 359:258-265. [77] ZHAO X, HE X, CHEN B, et al. MOFs derived metallic cobalt-zinc oxide@nitrogen-doped carbon/carbon nanotubes as a highly-efficient electrocatalyst for oxygen reduction reaction[J]. App-lied Surface Science, 2019, 487:1049-1057. [78] DOU S, LI X, TAO L, et al. Cobalt nanoparticle-embedded carbon nanotube/porous carbon hybrid derived from MOF-encapsulated Co3O4 for oxygen electrocatalysis[J]. Chemical Communications, 2016, 52(62):9727-9730. [79] BAN J, XU G, ZHANG L, et al. Efficient Co-N/PC@CNT bifunctional electrocatalytic materials for oxygen reduction and oxygen evolution reactions based on metal-organic frameworks[J]. Nanoscale, 2018, 10(19):9077-9086. [80] YANG S J, CHO J H, NAHM K S, et al. Enhanced hydrogen storage capacity of Pt-loaded CNT@MOF-5 hybrid composites[J]. International Journal of Hydrogen Energy, 2010, 35(23):13062-13067. [81] YOO J T, LEE S H, LEE C K, et al. Homogeneous decoration of zeolitic imidazolate framework-8 (ZIF-8) with core-shell structures on carbon nanotubes[J]. RSC Advances, 2014, 4(91):49614-49619. [82] LIN R, GE L, LIU S, et al. Mixed-matrix membranes with me-talorganic framework-decorated CNT fillers for efficient CO2 separation[J]. ACS Applied Materials & Interfaces, 2015, 7(27):14750-14757. [83] LIN R, GE L, DIAO H, et al. Propylene/propane selective mixed matrix membranes with grape-branched MOFs/CNTs filler[J]. Journal of Materials Chemistry A, 2016, 4(16):6084-6090. [84] ULLAH S, BUSTAM M A, ELKHALIFAH A L I E I, et al. Synthesis, CO2 adsorption performance of modified MIL-101 with multi-wall carbon nanotubes[J]. Advanced Materials Research, 2016, 1133:486-490. [85] JABBARI V, VELETA J M, ZAREI-CHALESHTORI M, et al. Green synthesis of magnetic MOF@GO and MOF@CNT hybrid nanocomposites with high adsorption capacity towards organic pollutants[J]. Chemical Engineering Journal, 2016, 304:774-783. [86] AHSAN M A, JABBARI V, ISLAM M T, et al. Sustainable synthesis and remarkable adsorption capacity of MOF/graphene oxide and MOF/CNT based hybrid nanocomposites for the removal of bisphenol a from water[J]. Science of the Total Environment, 2019, 673:306-317. [87] ZHANG K, WU F, LI J, et al. Networks constructed by metal organic frameworks (MOFs) and multiwall carbon nanotubes (MCNTs) for excellent electromagnetic waves absorption[J]. Materials Chemistry and Physics, 2018, 208:198-206. [88] SHEN Y, BAI J. A new kind CO2/CH4 separation material:open ended nitrogen doped carbon nanotubes formed by direct pyrolysis of metal organic frameworks[J]. Chemical Communications, 2010, 46(8):1308-1310. [89] WANG M Q, YE C, BAO S J, et al. Carbon nanotubes implanted manganese-based MOFs for simultaneous detection of biomolecules in body fluids[J]. Analyst, 2016, 141(4):1279-1285. [90] CHAPPANDA K N, SHEKHAH O, YASSINE O, et al. The quest for highly sensitive QCM humidity sensors: the coating of CNT/MOF composite sensing films as case study[J]. Sensors and Actuators B:Chemical, 2018, 257:609-619. [91] ZHANG X, XU Y, YE B. An efficient electrochemical glucose sensor based on porous nickel-based metal organic framework/carbon nanotubes composite (Ni-MOF/CNTs)[J]. Journal of Alloys and Compounds, 2018, 767:651-656. [92] YIN H, ZHU J, CHEN J, et al. MOF-derived in situ growth of carbon nanotubes entangled Ni/NiO porous polyhedrons for high performance glucose sensor[J]. Materials Letters, 2018, 221:267-270. |
|
|
|