Please wait a minute...
 
材料工程  2015, Vol. 43 Issue (1): 66-71    DOI: 10.11868/j.issn.1001-4381.2015.01.012
  材料与工艺 本期目录 | 过刊浏览 | 高级检索 |
Y微合金化高铌TiAl基合金微观组织研究
王艳晶, 柳乐, 宋玫锦
沈阳航空航天大学 材料科学与工程学院, 沈阳 110136
Microstructure of Y Micro-alloying TiAl Based Alloy with High Nb Content
WANG Yan-jing, LIU Le, SONG Mei-jin
College of Material Science and Engineering, Shenyang Aerospace University, Shenyang 110136, China
全文: PDF(4067 KB)   HTML()
输出: BibTeX | EndNote (RIS)      
摘要 采用真空非自耗电弧炉制备了名义成分为Ti-45Al-8Nb-xY(x=0,0.1,0.3,原子分数/%,下同)的合金,利用光学显微镜(OM)、扫描电镜(SEM)、X射线衍射仪(XRD)及能谱分析仪(EDS)观察了Y的添加与均匀化热处理制度对合金组织的影响.结果表明:稀土Y可以细化(α2+γ)层片团,较多的Y加入量(0.3%)细化效果显著;Y在合金中可形成分布在层片团晶内和晶界的粒状及棒状Y2O3和YAl2相;Y提高了Ti-45Al-8Nb合金的Tα转变温度,使同一均匀化热处理工艺下三种高铌TiAl基合金的组织差别较大.
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
王艳晶
柳乐
宋玫锦
关键词 高铌TiAl合金Y微合金化均匀化处理微观组织    
Abstract:The nominal composition of Ti-45Al-8Nb-xY(x=0,0.1,0.3,atom fraction/%) alloys was prepared by the non-pole-consuming vacuum arc furnace. The effect of Y addition and different homogenization treatments on the microstructure of the TiAl-based alloys with high Nb content was investigated by using the optical microscope (OM), scanning electronic microscope (SEM), X-ray diffraction (XRD), energy dispersive spectroscope (EDS). The results show that (α2+γ) lamellar colonies are refined by the element Y and the refining effect is improved with the increase of Y addition. The Y distributes along the grain boundaries and internal of lamellar colonies in the form of Y2O3 and YAl2 particles. The increase of phase transformation temperature Tα caused by the Y addition results in different microstructures formed in the TiAl-based alloys with high Nb content on the same homogenization process.
Key wordshigh Nb containing TiAl alloy    Y micro-alloying    homogenization treatment    microstructure
收稿日期: 2013-05-28     
1:  TG146.2+3  
基金资助:国家自然科学基金资助项目(50801047)
通讯作者: 王艳晶(1973—),女,博士,副教授,目前从事Ti合金及TiAl基合金的研究工作,联系地址:辽宁省沈阳市道义经济开发区道义南大街37号沈阳航空航天大学材料科学与工程学院(110136),wangyj2008@gmail.com     E-mail: wangyj2008@gmail.com
引用本文:   
王艳晶, 柳乐, 宋玫锦. Y微合金化高铌TiAl基合金微观组织研究[J]. 材料工程, 2015, 43(1): 66-71.
WANG Yan-jing, LIU Le, SONG Mei-jin. Microstructure of Y Micro-alloying TiAl Based Alloy with High Nb Content. Journal of Materials Engineering, 2015, 43(1): 66-71.
链接本文:  
http://jme.biam.ac.cn/jme/CN/10.11868/j.issn.1001-4381.2015.01.012      或      http://jme.biam.ac.cn/jme/CN/Y2015/V43/I1/66
[1] LASALMONIE A. Intermetallics: why is it so difficult to introduce them in gas turbine engines[J].Intermetallics, 2006,14(10-11):1123-1129.
[2] 林均品, 张来启, 宋西平, 等. 轻质γ-TiAl金属间化合物的研究进展[J]. 中国材料进展,2010,29(2):1-8.LIN J P,ZHANG L Q,SONG X P,et al.Status of research and development of light-weight γ-TiAl intermetallic based compounds[J].Materials China, 2010,29(2):1-8.
[3] TOSHIMITSU T. Development of a TiAl turbocharger for passenger vehicles[J]. Materials Science and Engineering:A, 2002, 329-331(6):582-588.
[4] KIM Y M,DIMIDUK D M. Designing gamma TiAl alloys: fundamentals, strategy, and production[A]. NATHAL M V. Structural Intermetallics 1997[C]. Warrendale: Academic Press, 1997. 531-543.
[5] HU D. Effect of boron addition on tensile ductility in lamellar TiAl alloys[J]. Intermetallics, 2002,10(9):851-858.
[6] YOSHIHARA M, KIM Y W. Oxidation behavior of gamma alloys designed for high temperature applications[J]. Intermetallics,2005,13(9): 952-958.
[7] KIM Y W, ROSENBERGER A, DIMIDUK D M. Microstructural changes and estimated strengthening contributions in a gamma alloy Ti-45Al-5Nb pack-rolled sheet[J]. Intermetallics,2009, 17(12):1017-1027.
[8] 陈玉勇,张树志,孔凡涛,等. 新型β-γTiAl基合金的研究进展[J]. 稀有金属,2012,36(1):154-160.CHEN Y Y, ZHANG S Z, KONG F T,et al.Progress in β-solidifying γ-TiAl based alloys[J].Chinese Journal of Rare Metals,2012,36(1):154-160.
[9] GERLING R, BARTELS A, CLEMENS H, et al. Structural characterization and tensile properties of a high niobium containing gamma TiAl sheet obtained by powder metallurgical processing[J].Intermetallics, 2004, 12(3) : 275-280.
[10] KONG F T, CHEN Y Y, WANG W, et al. Microstructures and mechanical properties of hot-pack rolled Ti-43Al-9V-Y alloy sheet[J]. Transactions of Nonferrous Metals Society of China, 2009, 19(5):1126-1130.
[11] 孔凡涛,陈玉勇,李宝辉. 热机械处理对Ti-45Al-5Nb-0.3Y合金的显微组织和力学性能的影响[J]. 金属学报, 2008, 44(6):757-763. KONG F T,CHEN Y Y,LI B H.Effects of thermo-mechanical treatment on microstructure and mechanical property of Ti-45Al-5Nb-0.3Y alloy[J]. Acta Metallurgica Sinica, 2008, 44(6):757-763.
[12] 张宁,林均品,王艳丽,等. 合金元素Y对高铌TiAl高温合金长期抗氧化性的影响[J]. 航空材料学报, 2006, 26(6):42-45. ZHANG N, LIN J P, WANG Y L,et al. Influence of Y-addition on the long-term oxidation behavior of high Nb containing TiAl alloys[J]. Journal of Aeronautical Materials, 2006, 26(6):42-45.
[13] 许正芳,徐向俊,林均品, 等. 热处理消除大尺寸铸态高Nb-TiAl基合金组织中的β相偏析[J]. 材料工程, 2007, (9): 42-46. XU Z F, XU X J, LIN J P, et al. Elimination of β-phase segregation in as-cast high Nb containing TiAl alloy by heat treatment[J].Journal of Materials Engineering, 2007, (9): 42-46.
[14] 路新,朱郎平,刘程程,等. 铸造Ti-45Al-8.5Nb-0.5(W,B,Y)合金组织均匀化处理[J]. 金属热处理, 2012, 37(5): 61-64. LU X,ZHU L P, LIU C C,et al. Homogenization of as-cast Ti-45Al-8.5Nb-0.5(W,B,Y) alloy[J]. Heat Treatment of Metals,2012, 37(5): 61-64.
[15] CHEN G L, ZHANG W J, LIU Z C, et al.Microstructure and properties of high-Nb containing TiAl-based alloys[A]. KIM Y W. Gamma Titanium Aluminides[C]. Warrendale: Academic Press,1999. 371-380.
[16] 许正芳,徐向俊,林均品,等. 热处理对大尺寸铸态高Nb-TiAl合金组织中S-偏析的影响[J]. 航空材料学报,2007,27(3):28-32. XU Z F, XU X J, LIN J P,et al. Effect of heat treatment on S-segregation of microstructure for as-cast high Nb containing TiAl alloy[J]. Journal of Aeronautical Materials, 2007,27(3):28-32.
[17] 杨广宇,刘咏,王岩,等. 微量B和Y对铸造Ti-Al-Nb-W合金显微组织的影响[J]. 中国有色金属学报,2011,21(4):777-783. YANG G Y, LIU Y, WANG Y, et al. Effects of trace B and Y elements on microstructures of cast Ti-Al-Nb-W alloy[J]. The Chinese Journal of Nonferrous Metals, 2011, 21(4):777-783.
[18] 李宝辉,陈玉勇,孔凡涛. Y对TiAl合金显微组织及性能的影响[J].特种铸造及有色金属,2006,26(12): 762-765. LI B H, CHEN Y Y, KONG F T. Effects of yttrium on microstructure and properties of TiAl alloy[J].Special Casting & Nonferrous Alloys, 2006, 26(12): 762-765.
[19] 郝志江. 稀土Y对TiAl基合金高温抗氧化性能的影响研究[D]. 哈尔滨:哈尔滨工业大学,2006. HAO Z J. Research on the effects of rare-earths on the high temperature oxidation resistance of TiA1 based alloys. Harbin: Harbin Institute of Technology, 2006.
[20] 王艳晶,宋玫锦,王继杰,等. 多组元微合金化高铌TiAl基合金微观组织的研究[J]. 沈阳航空航天大学学报,2013,30(1):20-24. WANG Y J, SONG M J, WANG J J, et al. Study on microstructure of multi-component micro-alloying TiAl-based alloy with high Nb content[J]. Journal of Shenyang Aerospace University, 2013, 30(1):20-24.
[21] 彭超群,黄伯云. TiAl基合金在快速加热循环热处理过程中的结构失稳[J]. 稀有金属材料与工程,2004,33(4): 363-367. PENG C Q,HUANG B Y. Microstructural instability of the TiAl-based alloy during rapid heating cyclic heat treatment[J]. Rare Metal Materials and Engineering, 2004, 33(4): 363-367.
[22] 张继,张志宏,石建东,等. TiAl合金细小全层片组织形成机理[J].金属学报,1998,34 (9): 919-922. ZHANG J, ZHANG Z H, SHI J D, et al. Transformation fine fully lamellar microstructure in TiAl alloys[J].Acta Metallurgica Sinica, 1998,34(9): 919-922.
[23] 高建峰,徐向俊,林均品,等. 热变形高铌TiAl合金室温塑性研究[J]. 稀有金属材料与工程,2005,34(9): 1497-1499. GAO J F,XU X J,LIN J P,et al. Effect of hot-forging on the room temperature ductility of high Nb containing TiAl alloy[J].Rare Metal Materials and Engineering, 2005,34(9):1497-1499.
[1] 刘铭, 汝继刚, 臧金鑫, 张坤, 何维维, 王亮, 陈高红. 新型Al-Zn-Mg-Cu铝合金热稳定性研究[J]. 材料工程, 2015, 43(4): 13-18.
[2] 刘鹏, 李士凯, 张元彬, 刘燕. 非晶增强铝基复合材料的微观结构及腐蚀性能[J]. 材料工程, 2015, 43(3): 67-71.
[3] 李万青, 魏红梅, 何鹏, 高丽娇, 林铁松, 李小强, 赫兰春. Ti3Al和Ti2AlNb合金扩散连接界面的组织及力学性能[J]. 材料工程, 2015, 43(1): 37-43.
[4] 王洁, 聂宝华, 蔡成, 张峥. 加氢反应器环境服役的2.25Cr1Mo钢性能退化研究[J]. 材料工程, 2015, 43(1): 82-88.
[5] 杜红燕, 李亚江. AZ31/7005异种材料填丝GTAW焊接接头的组织与性能[J]. 材料工程, 2014, 0(9): 14-19.
[6] 王定刚, 肖程波, 宋尽霞, 李青, 余乾. 不同稀土元素添加量对K465合金微观组织与力学性能的影响[J]. 材料工程, 2014, 0(8): 46-50.
[7] 刘猛, 白书欣, 李顺, 赵恂, 熊德赣. 界面设计对Sip/Al复合材料组织和性能的影响[J]. 材料工程, 2014, 0(8): 61-66.
[8] 张丁非, 耿青梅, 杨绪盛, 余大亮, 潘复生. 新型复合挤压工艺中温度对AZ61组织和性能的影响[J]. 材料工程, 2014, 0(7): 1-4.
[9] 陈冰清, 熊华平, 郭绍庆, 张学军, 孙兵兵, 唐思熠. NiCuNbCr焊料Ti3Al/GH4169合金氩弧焊接头的组织及性能[J]. 材料工程, 2014, 0(4): 13-17,25.
[10] 李卿, 郭鸿镇, 王彦伟, 赵张龙, 姚泽坤. GH4049合金的热变形行为及组织演变[J]. 材料工程, 2014, 0(12): 55-59.
[11] 周松, 谢里阳, 回丽, 张啸尘, 许良. 喷丸强化对2XXX铝合金疲劳寿命的影响[J]. 材料工程, 2014, 0(12): 86-91.
[12] 刘慧敏, 王楠, 苏娟. 原位Al2O3/Al-Cu复合材料的制备与组织研究[J]. 材料工程, 2014, 0(11): 23-27.
[13] 赵龙志, 焦宇, 赵明娟, 张坚, 胡勇, 熊光耀, 姜羡. 保温时间对Al-Fe-Si/Al原位复合材料力学性能的影响[J]. 材料工程, 2014, 0(1): 35-40,46.
[14] 焦泽辉, 宋西平, 张敏, 于慧臣. 全片层与双态组织高铌TiAl合金高温原位拉伸研究[J]. 材料工程, 2013, 0(9): 79-83,90.
[15] 赵红霞, 黄旭, 王宝, 雷力明. 热处理对Ti-35V-15Cr-0.15Si-0.05C合金热稳定性能的影响[J]. 材料工程, 2013, 0(7): 73-77.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn