Please wait a minute...
 
材料工程  2015, Vol. 43 Issue (6): 14-20    DOI: 10.11868/j.issn.1001-4381.2015.06.003
  材料与工艺 本期目录 | 过刊浏览 | 高级检索 |
Nb对高含Cl-强酸性溶液环境中低合金钢腐蚀性能的影响
岳远杰, 唐荻, 武会宾, 梁金明, 巨彪
北京科技大学 高效轧制国家工程研究中心, 北京 100083
Influence of Nb on Corrosion Behavior of Low Alloy Steel in Strong-acid Cl- Solution Environment
YUE Yuan-jie, TANG Di, WU Hui-bin, LIANG Jin-ming, JU Biao
National Engineering Research Center for Advanced Rolling, University of Science and Technology Beijing, Beijing 100083, China
全文: PDF(4681 KB)  
输出: BibTeX | EndNote (RIS)      
摘要 通过对5种不同Nb含量钢板在自制的货油舱下底板环境模拟装置中进行腐蚀实验,探究了Nb元素高含Cl-强酸性溶液环境中低合金钢腐蚀性能的影响。结果表明:在高含Cl-强酸性的环境中,低合金钢的腐蚀速率随着Nb元素含量的增多,呈现先减小后增大的规律。Nb元素含量增多的同时,实验钢晶粒尺寸减小,位错密度增加,并且小角度晶界比例升高,使得Nb含量为0.055%的实验钢在高含Cl-强酸性溶液环境中拥有良好的耐腐蚀性能。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
岳远杰
唐荻
武会宾
梁金明
巨彪
关键词 Nb强酸性Cl-腐蚀微观结构    
Abstract:The corrosion behavior of steel with five different Nb content in bottom plate corrosion environment was studied in homemade cargo oil tank corrosion simulation device. The influence of Nb on corrosion behavior of low alloy steel in strong-acid Cl- solution environment was investigated.The results show that in strong-acid Cl- solution environment, as Nb content increases,the corrosion speed first decreases and then goes up, meanwhile, with the increase of Nb content, the grain size of test steel reduces and dislocation density increases and also the proportion of small angle grain boundary increases, the test steel which contains 0.055% Nb has good corrosion resistance performance in strong-acid Cl- solution environment.
Key wordsNb    strong-acid Cl-    corrosion    microstructure
收稿日期: 2014-07-14     
1:  TG174.2  
通讯作者: 武会宾(1977-),男,副教授,硕士,研究方向为金属材料研发与性能优化,联系地址:北京市海淀区学院路30号北京科技大学科技楼710室(100083),E-mail:huibinwu2013@163.com     E-mail: huibinwu2013@163.com
引用本文:   
岳远杰, 唐荻, 武会宾, 梁金明, 巨彪. Nb对高含Cl-强酸性溶液环境中低合金钢腐蚀性能的影响[J]. 材料工程, 2015, 43(6): 14-20.
YUE Yuan-jie, TANG Di, WU Hui-bin, LIANG Jin-ming, JU Biao. Influence of Nb on Corrosion Behavior of Low Alloy Steel in Strong-acid Cl- Solution Environment. Journal of Materials Engineering, 2015, 43(6): 14-20.
链接本文:  
http://jme.biam.ac.cn/jme/CN/10.11868/j.issn.1001-4381.2015.06.003      或      http://jme.biam.ac.cn/jme/CN/Y2015/V43/I6/14
[1] SOARES C G,GARBATOV Y,ZAYED A,et al. Influence of environmental factors on corrosion of ship structures in marine atmosphere[J]. Corrosion Science, 2009,51 (9) : 2014-2026.
[2] SOARES C G,GARBATOV Y,ZAYED A,et al. Corrosion wastage model for ship crude oil tanks[J].Corrosion Science, 2008, 50(11) : 3095-3106.
[3] SHIOMI H,KANEKO M,KASHIMA K,et al. Development of anti-corrosion steel for cargo oil tanks[A]. 2007 Ship Builder Meeting. Busan: TSCF, 2007[C].1-5.
[4] KASHIMA K,TANINO Y,KUBO S,et al. Development of corrosion resistant steel for cargo oil tanks[A]. Ship Building Technology ISST[C]. Osaka: The Japan Society of Naval Architects and Ocean Engineers and the Royal Institution of Naval Architects,2007.6-10.
[5] REZA M,ALISTAIRR G. On the development of ship anti-roll tanks[J]. Ocean Engineering,2007,34(1): 103-121.
[6] MINORU I,MICHIO K,SHIJI N,et al. Development of corrosion resistant steel for bottom plate of crude oil tankers and onboard evaluation results[A]. Proceedings of the ASME 2012 31st International Conference on Ocean[C].Rio de Janeiro: Offshore and Arctic Engineering,2012.1-6.
[7] SHINJI S,AKIHIKO T,HIROKI I,et al. Development of anti-corrosion steel for the bottom plate of cargo oil tanks[A]. Shipbuilding Technology ISST 2007[C]. Osaka: The Japan Society of Naval Architects and Ocean Engineers and the Royal Institution of Naval Architects,2007.10-14.
[8] 梁金明,唐荻,武会宾,等. 含 Cr低合金钢在货油舱下底板环境中的腐蚀行为[J]. 华南理工大学学报: 自然科学版,2013,41(10): 152-157. LIANG J M,TANG D,WU H B, et al. Environment corrosion behavior of cargo oil tank bottom plate made of Cr-contained low-allow steel[J].Journal of South China University of Technology:National Science Edition,2013,41(10): 152-157.
[9] 姚小飞,谢发勤,王毅飞. pH值对超级13Cr钢在NaCl溶液中腐蚀行为与腐蚀膜特性的影响[J]. 材料工程,2014,(3): 83-89.YAO X F,XIE F Q,WANG Y F. Effects of pH values on corrosive films characteristics and corrosive behaivors of super 13Cr tubing steels in NaCl solution [J]. Journal of Materials Engineering,2014,15(3): 83-89.
[10] 齐彦昌,彭云,田志凌,等. Ni对油船货油舱下底板焊缝耐蚀性的影响[J]. 材料热处理学报,2014,34(4): 69-73. QI Y C,PENG Y,TIAN Z L,et al.Effect of Ni on corrosion resistance of weld metals for bottom plates of cargo oil tanks[J]. Transactions of Materials and Heat Treatment,2014,34(4): 69-73.
[11] 杜楠,叶超,田文明,等. 304不锈钢点蚀行为的电化学[J]. 材料工程,2014,(6): 68-73. DU N, YE C, TIAN W M,et al.304 stainless steel pitting behaviors by means of electrochemical impedance spectroscopy [J].Journal of Materials Engineering,2014,(6): 68-73.
[12] 陈惠玲,李晓娟,魏雨. 碳钢在含氯离子环境中腐蚀机理的研究[J]. 腐蚀与防护,2007,28(1): 17-19. CHENG H L,LI X J,WEI Y. Corrosion mechanism of carbon steel in chloride solution[J]. Corrosion and Protection,2007,28(1): 17-19.
[13] 王树涛,杨善武,高克玮,等. 低合金耐候钢在含氯离子环境中的耐腐蚀性能[J]. 材料热处理学报,2008,29(4):170-175. WANG S T,YANG S W,GAO K W,et al. Corrosion resistance of low alloying weathering steel in environment containing chloride ion[J]. Transactions of Materials and Heat Treatment,2008,29(4): 170-175.
[14] GUO J,YANGS W,SHANG C J,et al. Influence of carbon content and microstructure on corrosion behaviour of low alloy steels in a Cl-containing environment [J].Corrosion Science,2008,(51):242-252.
[15] 余永宁. 材料科学基础[M]. 北京: 高等教育出版社, 2006. YU Y N. Fundamentals of Material Science[M]. Beijing: Higher Education Press,2006.
[1] 林翠, 赵晴, 文庆杰. TC1钛合金的腐蚀加工及其对基体性能影响[J]. 材料工程, 2015, 43(7): 48-55.
[2] 章淑芳, 王晓敏, 陈辉, 廖潇垚. 7003铝合金动车柜体的应力腐蚀开裂[J]. 材料工程, 2015, 43(7): 105-112.
[3] 杨海青, 李青, 肖程波, 胡聘聘, 林山峰. Re及时效时间对耐腐蚀镍基定向合金组织和持久寿命的影响[J]. 材料工程, 2015, 43(6): 31-37.
[4] 胥聪敏, 杨东平, 张灵芝, 史立强, 李辉辉. SRB对X100钢在鹰潭土壤模拟溶液中腐蚀行为的影响[J]. 材料工程, 2015, 43(6): 71-78.
[5] 杨可, 杨克, 包晔峰. 氮合金化堆焊硬面合金的耐腐蚀性能研究[J]. 材料工程, 2015, 43(5): 33-37.
[6] 马彦, 陈朝辉. 1800℃热处理对PIP法C/SiC复合材料结构和性能的影响[J]. 材料工程, 2015, 43(4): 98-101.
[7] 郝文魁, 刘智勇, 马岩, 杜翠薇, 李晓刚, 胡山山. 不同pH的碱性环境中16Mn钢及热影响区应力腐蚀行为[J]. 材料工程, 2015, 43(3): 28-34.
[8] 刘鹏, 李士凯, 张元彬, 刘燕. 非晶增强铝基复合材料的微观结构及腐蚀性能[J]. 材料工程, 2015, 43(3): 67-71.
[9] 郑锐, 林建平, 吴倩倩, 吴泳荣. 结构胶胶接汽车车身金属接头抗环境腐蚀性能研究进展[J]. 材料工程, 2015, 43(3): 98-105.
[10] 周峰, 吴开明. 超快冷工艺对高铌X80管线钢抗腐蚀性能的影响[J]. 材料工程, 2015, 43(2): 67-72.
[11] 朱敏, 刘智勇, 杜翠薇, 李晓刚, 王丽叶. 交流电对X80钢在酸性土壤环境中腐蚀行为的影响[J]. 材料工程, 2015, 43(2): 85-90.
[12] 马少华, 回丽, 周松, 许良, 朱永辉. 腐蚀环境对预腐蚀铝合金腐蚀疲劳性能的影响[J]. 材料工程, 2015, 43(2): 91-95.
[13] 李万青, 魏红梅, 何鹏, 高丽娇, 林铁松, 李小强, 赫兰春. Ti3Al和Ti2AlNb合金扩散连接界面的组织及力学性能[J]. 材料工程, 2015, 43(1): 37-43.
[14] 李萍, 李安娜, 庞胜娇, 赵杰, 李廷举. Super304H抗碱金属硫酸盐的腐蚀行为[J]. 材料工程, 2015, 43(1): 54-58.
[15] 俞树荣, 孟恺, 李淑欣. 空气和腐蚀环境下双相不锈钢SAF2507的疲劳性能[J]. 材料工程, 2015, 43(1): 77-81.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn