新型废热锅炉高低温管板热应力分析

PDF(93 KB)

材料工程 ›› 1998, Vol. 0 ›› Issue (4) : 34-35.

扫码查看或转发全文

论文

新型废热锅炉高低温管板热应力分析

刘敏珊, 董其伍

作者信息 +

Thermal Stress Analysis of Tubesheet with Higher and Lower Temperature Parts in a New Type Waster Heat Boiler

Liu Min-shan, Dong Qi-wu

Author information +

文章历史 +

摘要

对新型废热锅炉16MnR高低温管板作温度场和热应力分析,编制了相应的三维有限元程序.并对新型高、低温管板模拟实验模型进行了实验应力分析,实验结果与有限元计算结果吻合尚好.这对于管板的延寿和安全运行提供了一定的理论依据.

Abstract

In this paper,the temperature field and thermal stress are analyzed for an 16MnR tubesheet with higher and lower temperature parts. A three-dimensional finite element code is programmed. Experimental measurement of stresses versus strain gauges is performed on a tubesheet model. The test results agree fairly well with the analysis. This work provides some basis for life extension and safe operation of the waste heat boilers.

导出引用

刘敏珊, 董其伍. 新型废热锅炉高低温管板热应力分析[J]. 材料工程, 1998, 0(4): 34-35

Liu Min-shan, Dong Qi-wu. Thermal Stress Analysis of Tubesheet with Higher and Lower Temperature Parts in a New Type Waster Heat Boiler[J]. Journal of Materials Engineering, 1998, 0(4): 34-35

参考文献

1 Rane,M.I.A Finite Element Procedure for Stress Analys is of Fixed Tube Sheet Heat Exchanger,Proc.5th.Int.Conf.on Press.Vess.Tech,1983
2 Singh.K.P.An Approximate Method for Evaluting the Tem-perature in Tube Sheet Ligaments of Tubular Heat Exchangers Under Steady-State Condition,J.of Eng.For Power,1982,104:895
3 杨菊生,揽生瑞.有限元法程度设计,西安交通大学出版社,1990.