热处理工艺对惯性摩擦焊接头冲击韧性的影响

PDF(138 KB)

材料工程 ›› 2000, Vol. 0 ›› Issue (12) : 26-28.

扫码查看或转发全文

工艺

热处理工艺对惯性摩擦焊接头冲击韧性的影响

张海泉¹, 张彦华¹, 张行安², 张田仓³, 孙成彬³

作者信息 +

Effect of Heat Treatment on the Impact Toughness in Inertia Friction Welded Joints

ZHANG Hai-quan¹, ZHANG Yan-hua¹, ZHANG Xing-an², ZHANG Tian-cang³, SUN Cheng-bin³

Author information +

文章历史 +

摘要

研究了焊后热处理对碳钢惯性摩擦焊接头冲击韧性的影响.结果表明,焊后热处理对惯性摩擦焊接头的冲击韧性有显著影响,采用适当的焊后热处理可以改善接头的冲击韧性.

Abstract

The effect of post-weld heat treatment on the impact toughness in inertia friction welded joints of carbon steel was studied in this paper. The result show that the post-weld heat treatment greatly affected the impact toughness of inertia friction welded joints. The impact toughness of the welded joints can be improved by an adequate post-weld heat treatment.

导出引用

张海泉, 张彦华, 张行安, 张田仓, 孙成彬. 热处理工艺对惯性摩擦焊接头冲击韧性的影响[J]. 材料工程, 2000, 0(12): 26-28

ZHANG Hai-quan, ZHANG Yan-hua, ZHANG Xing-an, ZHANG Tian-cang, SUN Cheng-bin. Effect of Heat Treatment on the Impact Toughness in Inertia Friction Welded Joints[J]. Journal of Materials Engineering, 2000, 0(12): 26-28

中图分类号： TG162 TG407

参考文献

[1] 栾国红. 惯性摩擦焊超声波检测技术研究[C]. 航空连接技术重点实验室论文选编,1998,61~68
[2] 赵熹华. 压力焊[M]. 北京:机械工业出版社, 1989
[3] 张海泉, 张彦华. 碳钢惯性摩擦焊接头动态断裂韧性试验研究[C]. 第九次全国焊接会议论文集(第2册),1999:148~151
[4] 崔中圻. 金属学与热处理[M]. 北京:机械工业出版社, 1988
[5] 周振丰, 张文钺. 焊接冶金与金属焊接性[M]. 北京:机械工业出版社, 1988.