PA封端对ODPA/ODA聚酰亚胺薄膜热稳定性的影响

程茹, 黄培, 时钧

材料工程 ›› 2006, Vol. 0 ›› Issue (7) : 7-10.

PDF(186 KB)
PDF(186 KB)
材料工程 ›› 2006, Vol. 0 ›› Issue (7) : 7-10.
论文

PA封端对ODPA/ODA聚酰亚胺薄膜热稳定性的影响

  • 程茹, 黄培, 时钧
作者信息 +

The Effect on Thermal Stability of Polyimide Films Based on Phthalimide End-capped ODPA and ODA

  • CHENG Ru, HUANG Pei, SHI Jun
Author information +
文章历史 +

摘要

制备了经邻苯二甲酸酐(PA)封端的理论数均分子量为10000和30000的聚酰亚胺(PI)薄膜,通过差示扫描热分析(DSC)测定薄膜高温热处理前后玻璃化温度的变化,研究了PA封端对ODPA/ODA聚酰亚胺薄膜热稳定性能的影响。结果表明,封端可有效阻止分子链的无序增长,使聚酰胺酸(PAA)分子量分布变窄;且可明显减少分子链在高温下的反应,表现为热处理前后封端薄膜Tg变化明显小于未封端的薄膜。随着高温热处理时间的延长,短链薄膜Tg增长趋势减缓,长链薄膜的Tg变化直线上升。从高温再聚合、交联反应和端基活动性出发,解释了Tg升高和PA封端有利于提高PI薄膜热稳定性的原因。

Abstract

Polyimide films capped with nonreactive phthalimide end groups were synthesized with theoretical number average molecular mass of 10000 and 30000 calculated using the Carothers equation.The effect of end-capper on the thermal properties was studied by investigating the change of the glass transition temperature(Tg) of films after cured at high temperature.The Gel Permeation Chromatography(GPC) results indicated that the molecular distribution of end capped PAA was smaller than that of the no end-capped one.The Differential Scanning Calorimetry(DSC) results showed PA end-capped polyimide films exhibited slower rising range of the Tg compared to no end cappers films'.With the increasing of curing time,the Tg of the short chain film increased slowly,which of the long chain film increased straightly.The end capper's effect was explained based on polymerization at high temperature,chain branching/crossing-linking reactions and molecular activity.

关键词

聚酰亚胺薄膜 / 热稳定性 / 玻璃化温度

Key words

polyimide film / thermal stability / glass transition temperature

引用本文

导出引用
程茹, 黄培, 时钧. PA封端对ODPA/ODA聚酰亚胺薄膜热稳定性的影响[J]. 材料工程, 2006, 0(7): 7-10
CHENG Ru, HUANG Pei, SHI Jun. The Effect on Thermal Stability of Polyimide Films Based on Phthalimide End-capped ODPA and ODA[J]. Journal of Materials Engineering, 2006, 0(7): 7-10
中图分类号: TQ323.7   

参考文献

[1] 张雯,张露,李家利,等.国外聚酰亚胺薄膜概况及其应用进展[J].绝缘材料,2001,2:21-23.
[2] SMITH C H.Iusulation for metallic glasses in pulse power system[J].IEEE Transactions on Electron Devices,1991,38(4):750-757.
[3] 焦剑,雷渭媛.高聚物结构、性能与测试[M].北京:化学工业出版社,2003.
[4] MHASKE S B,BHINGARKAR R V,SABNE M B,et al.Synthesis and characterization of end-capped polyimides and their gas permeability properties[J].Journal of Applied Polymer Science,2000,77:627-635.
[5] SRINIVAS S,CAPUTO F E,GRAHAM M,et al.Semicrystalline polyimides based on controlled molecular weight phthalimde endcapped 1,3-bis (4-aminophenoxy) benzene and 3,3',4,4'-biphenyltet-racarboxylic dianhydride:synthesis,crystallization,melting,and thermal stability[J].Macromolecules,1997,30:1012-1022.
[6] KIM Y J,PARK H P.Preventing gelation in polyisoimide synthesis[J].Polymer International,2000,49:8-10.
[7] 金日光,华幼卿.高分子物理[M].北京:化学工业出版社,1991.
[8] 丁孟贤,何天白.聚酰亚胺新型材料[M].北京:科学出版社,1998.
[9] 黄培,耿洪斌,程茹,等.长链聚酰胺酸的热环化动力学[J].高分子学报,2004,2:256-262.
[10] 刘振海,畠山立子,陈学思.聚合物量热测定[M].北京:化学工业出版社,2002.
PDF(186 KB)

838

Accesses

0

Citation

Detail

段落导航
相关文章

/