Please wait a minute...
 
材料工程  2014, Vol. 0 Issue (9): 106-112    DOI: 10.11868/j.issn.1001-4381.2014.09.018
  综述 本期目录 | 过刊浏览 | 高级检索 |
热喷涂制备吸波涂层的研究进展
刘毅, 魏世丞, 童辉, 田浩亮, 徐滨士
装甲兵工程学院 装备再制造技术国防科技重点实验室, 北京 100072
Progress in Research on Microwave Absorbing Coatings Prepared by Thermal Spraying Technology
LIU Yi, WEI Shi-cheng, TONG Hui, TIAN Hao-liang, XU Bin-shi
National Key Laboratory for Remanufacturing, Academy of Armored Forces Engineering, Beijing 100072, China
全文: PDF(934 KB)   HTML()
输出: BibTeX | EndNote (RIS)      
摘要 主要介绍了当前国内外热喷涂制备雷达吸波涂层的研究进展。重点讨论了碳化硅型吸波涂层、碳系吸波涂层和铁氧体吸波涂层的制备状况,分析比较了各材料体系的优缺点和适应性,为后续开展研究工作提供依据。同时指出了热喷涂制备吸波涂层所面临的问题,并提出扩大喷涂材料体系,在涂层厚度、结合强度和吸波效率中寻找一个平衡点,制备出优质、高效的吸波涂层是今后的发展方向。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
刘毅
魏世丞
童辉
田浩亮
徐滨士
关键词 吸波涂层制备工艺热喷涂    
Abstract:The recent research of microwave absorbing coatings prepared by thermal spraying technology is introduced. The SiC, C and ferrite coatings are discussed respectively. The advantage, disadvantage and adaptability of such materials system are analyzed and compared, which provides suggestion for the material selection of subsequent research work. The problems of this technology are also put forward. The enlargement of spray materials system, the balance among the coating thickness, bond strength and microwave absorbing efficiency, so as to prepare high quality and effective microwave absorbing coatings are the future development trend.
Key wordsmicrowave absorbing coating    preparation technology    thermal spraying
收稿日期: 2013-07-02     
1:  TB34  
基金资助:国家重点基础研究发展计划(973计划)项目(2011CB013403);国家自然科学基金资助项目(51222510)
通讯作者: 魏世丞(1974- ),男,博士,研究员,主要研究表面工程与再制造工程,联系地址:北京市丰台区杜家坎21号再制造系院士办(100072)     E-mail: wsc33333@163.com
引用本文:   
刘毅, 魏世丞, 童辉, 田浩亮, 徐滨士. 热喷涂制备吸波涂层的研究进展[J]. 材料工程, 2014, 0(9): 106-112.
LIU Yi, WEI Shi-cheng, TONG Hui, TIAN Hao-liang, XU Bin-shi. Progress in Research on Microwave Absorbing Coatings Prepared by Thermal Spraying Technology. Journal of Materials Engineering, 2014, 0(9): 106-112.
链接本文:  
http://jme.biam.ac.cn/jme/CN/10.11868/j.issn.1001-4381.2014.09.018      或      http://jme.biam.ac.cn/jme/CN/Y2014/V0/I9/106
[1] 胡传炘. 隐身涂层技术[M]. 北京: 化学工业出版社, 2004.HU C X. Stealth Coating Technology[M]. Beijing: Chemical Industry Press, 2004.
[2] 周亮, 周万城, 刘涛, 等. 雷达吸波涂层制备技术的研究进展[J].材料导报, 2011, 25(3): 10-14.ZHOU L, ZHOU W C, LIU T, et al. Research development of preparation technology of radar absorbing coating[J]. Materials Review, 2011, 25(3): 10-14.
[3] 吴键, 徐琅, 张天才, 等. 吸波涂料在复合材料表面的吸波性能研究[J]. 电镀与涂饰, 2007, 26(9): 43-45. WU J, XU L, ZHANG T C, et al. Study on absorbing performance of absorbing coatings on surface of composite material[J]. Electroplating & Finishing, 2007, 26(9): 43-45.
[4] 田月娥, 潘志义, 袁艺, 等. 隐身涂层海洋环境适应性问题剖析[J]. 装备环境工程, 2005,2(6): 63-66. TIAN Y E, PAN Z Y, YUAN Y, et al. Analysis of the environmental adaptability problem of stealthy coating in marine atmosphere[J]. Equipment Enviromental Engineering, 2005, 2(6): 63-66.
[5] 赫丽华, 刘平桂, 王晓红. 雷达吸波涂层的失效行为[J]. 失效分析与预防, 2009, 4(3): 182-187. HE L H, LIU P G, WANG X H. Degeneration behavior of radar absorbing coatings[J]. Failure Analysis and Prevention, 2009, 4(3): 182-187.
[6] 王新坤, 封彤波, 吴灿伟, 等. 雷达吸波涂层失效模式及原位修复[J]. 表面技术, 2011, 40(4): 72-75.WANG X K, FENG T B, WU C W, et al. The failure types of radar absorbing coating and the original place repair techniques[J]. Surface Technology, 2011, 40(4): 72-75.
[7] 杨亮, 王亦菲, 张彦素, 等. 雷达吸波涂层损伤及修复研究进展[J]. 新技术新工艺, 2009, (1): 97-100. YANG L, WANG Y F, ZHANG Y S, et al. The repair technique and the damage of radar absorbing coatings and its research progress[J].New Technology & New Process, 2009, (1): 97-100.
[8] 周光华, 谭延江,彭菲菲, 等. 浅谈吸波涂料工程化应用中的常见问题[J].表面技术, 2009, 38(4): 83-85. ZHOU G H, TAN Y J, PENG F F, et al. Simply discuss about the familiar problems of radar absorbing coating in the engineering application[J].Surface Technology, 2009, 38(4): 83-85.
[9] 吴子健. 热喷涂技术与应用[M]. 北京: 化学工业出版社, 2006.WU Z J. Thermal Spraying Technology and Application[M]. Beijing: Chemical Industry Press, 2006.
[10] SAMPATH S. Thermal spray applications in electronics and sensors: past, present, and future[J]. Journal of Thermal Spray Technology, 2010, 19(5): 921-949.
[11] 陶禹, 李步云, 邓爱明, 等. 高温吸收剂研究进展及改性碳化硅吸波特性[J]. 表面技术, 2011, 40(3): 88-89. TAO Y, LI B Y, DENG A M, et al. Progress of the high absorbers and modified SiC absorbing performance[J]. Surface Technology, 2011, 40(3): 88-89.
[12] 罗发, 周万城, 焦桓, 等. SiC(N)/LAS吸波材料吸波性能研究[J]. 无机材料学报, 2003, 18(3): 580-584. LUO F, ZHOU W C, JIAO H, et al. Microwave absorbing materials SiC(N)/LAS[J]. Journal of Inorganic Materials, 2003, 18(3): 580-584.
[13] 何箐, 王世兴, 吕玉芬, 等. 一种热喷涂雷达吸波涂层制备技术[J]. 中国表面工程, 2011, 24(2): 31-36. HE Q, WANG S X, LV Y F, et al. A radar absorbing coating preparation technique by thermal spray[J]. China Surface Engineering, 2011, 24(2): 31-36.
[14] 曹佳伟, 黄运华, 张跃, 等. 四针状纳米氧化锌电磁波吸收特性[J]. 物理学报, 2008, 57(6): 3641-3645. CAO J W, HUANG Y H, ZHANG Y, et al. Research on electromagnetic wave absorbing properties of nano tetraleg ZnO[J]. Acta Physica Sinica, 2008, 57(6): 3641-3645.
[15] 吕艳红. 纳米复合双层雷达吸波涂层研究[J]. 兵器材料科学与工程, 2010, 33(1): 98-100. LV Y H. Study on the double-layer radar absorbing coating[J]. Ordnance Material Science and Engineering, 2010, 33(1): 98-100.
[16] 吕艳红. 纳米复合镍粉雷达吸波涂层研究[J]. 宇航材料工艺, 2009, (6): 29-32. LV Y H. Nano-composite nickel powder for radar absorbing coating[J].Aerospace Materials & Technology, 2009, (6): 29-32.
[17] 袁晓静, 杨俊华, 查柏林, 等. 热喷涂纳米β-SiC/LBS涂层的吸波性能[J]. 中国有色金属学报, 2009, 19(12): 2198-2203. YUAN X J, YANG J H, ZHA B L, et al. Absorber performance of thermally sprayed nanometer β-SiC/LBS matrix microwave absorber coatings[J]. The Chinese Journal of Nonferrous Metals, 2009, 19(12): 2198-2203.
[18] 卿玉长, 周万城, 罗发, 等. 多壁碳纳米管/环氧有机硅树脂吸波涂层的介电和吸波性能研究[J].无机材料学报, 2010, 25(2): 181-185. QING Y C, ZHOU W C, LUO F, et al. Electromagnetic and absorbing properties of multi-walled carbon nanotubes/epoxy-silicone coatings[J]. Journal of Inorganic Materials, 2010, 25(2): 181-185.
[19] 江礼, 袁晓静, 查柏林, 等. 等离子喷涂纳米莫来石基复合吸波涂层性能研究[J]. 无机材料学报, 2008, 23(6): 1272-1276. JIANG L, YUAN X J, ZHA B L, et al. Performance of mullite matrix microwave absorber coatings fabricated by plasma spraying technology[J]. Journal of Inorganic Materials, 2008, 23(6): 1272-1276.
[20] 王汉功, 汪刘应, 徐建国, 等. 微弧等离子喷涂碳纳米管/纳米Al2O3-TiO2复合涂层[J]. 电镀与涂饰, 2010, 29(9): 56-59. WANG H G, WANG L Y, XU J G, et al. Carbon nanotube /nano Al2O3-TiO2 composite coating deposited by micro-arc plasma spraying[J]. Electroplating & Finishing, 2010, 29(9): 56-59.
[21] 汪刘应, 徐卓, 华绍春, 等. 微弧等离子喷涂碳纳米管/纳米Al2O3-TiO2复合涂层高温性能研究[J]. 无机材料学报, 2011, 26(3): 239-243. WANG L Y, XU Z, HUA S C, et al. High temperature performance of micro-plasma sprayed CNTs/Al2O3-TiO2 composite coating[J].Journal of Inorganic Materials, 2011, 26(3): 239-243.
[22] 华绍春, 王汉功, 汪刘应, 等. 微弧等离子喷涂碳纳米管/纳米Al2O3-TiO2复合涂层的吸波性能研究[J]. 物理学报, 2009, 58(9): 6534-6541. HUA S C, WANG H G, WANG L Y, et al. Absorption properties of micro-plasma sprayed carbon nanotube-nanostructure Al2O3-TiO2 composite coatings[J]. Acta Physica Sinica, 2009, 58(9): 6534-6541.
[23] 刘顾, 汪刘应, 陈桂明, 等. CNTs-SiC/Al2O3-TiO2复合涂层的制备及其性能[J]. 无机材料学报, 2011, 26(11): 1187-1192. LIU G, WANG L Y, CHEN G M, et al. Preparation and properties of SiC-CNTs/Al2O3-TiO2 coating[J]. Journal of Inorganic Materials, 2011, 26(11): 1187-1192.
[24] 李荫远, 李国栋. 铁氧体物理学[M]. 北京: 科学出版社, 1978. LI Y Y, LI G D. Ferrite Physics[M]. Beijing: Science Press, 1978.
[25] HAN R, GONG L Q, WANG T, et al. Complex permeability and microwave absorbing properties of planar anisotropy carbonyl-iron/Ni0.5Zn0.5Fe2O4 composite in quasimicrowave band[J]. Materials Chemistry and Physics, 2012, 131(1-2): 555-560.
[26] BEGARD M, BOBZIN K, BOLELLI G, et al. Thermal spraying of Co, Ti-substituted Ba-hexaferrite coatings for electromagnetic wave absorption applications[J].Surface & Coatings Technology, 2009, 203(20-21): 3312-3319.
[27] LISJAK D, BOBZIN K, RICHARDT K, et al. Preparation of barium hexaferrite coatings using atmospheric plasma spraying[J]. Journal of the European Ceramic Society, 2009, 29(11): 2333-2341.
[28] LISJAK D, BEGARD M, BRUEHI M, et al. Hexaferrite/polyester composite coatings for electromagnetic-wave absorbers[J]. Journal of Thermal Spray Technology, 2011, 20(3); 638-644.
[29] LISJAK D, LINTUNEN P, HUJANEN A, et al. Hexaferrite/polyethylene composite coatings prepared with flame spraying[J]. Materials Letters, 2011, 65(3): 534-536.
[30] BOBZIN K, SCHLAEFER T, BEGARD M, et al. Development of Ba-hexaferrite coatings for electromagnetic wave absorption applications[J]. Surface & Coatings Technology, 2010, 205(4): 1015-1020.
[31] BOBZIN K, BOLELLI G, BRUEHI M, et al. Characterization of plasma-sprayed SrFe12O19 coatings for electromagnetic wave absorption[J]. Journal of the European Ceramic Society, 2011, 31(8): 1439-1449.
[32] YAN Q, GAMBINO R J, SAMPATH S, et al. Effects of zinc loss on the magnetic properties of plasma-sprayed MnZn ferrites[J]. Acta Materialia, 2004, 52(11): 3347-3353.
[33] ZHAO D, LUO F, ZHOU W C, et al. Microwave absorption properties and complex permittivity of Fe/FeAl2O4 coatings deposited by reactive plasma spraying Al/Fe2O3 powders[J]. Surface & Coatings Technology, 2011, 205(17-18): 4254-4259.
[34] FENINECHE N E, CHERIGUI M, AOURAG H, et al. Structure and magnetic properties study of iron-based thermally sprayed alloys[J].Materials Letters, 2004, 58(11): 1797-1801.
[35] YUAN X J, WANG H G, ZHA B L, et al. Submicron α-Fe/polyamide composite absorber coating by low temperature high velocity air fuel spray technique[J]. Surface & Coatings Technology, 2007, 201(16-17): 7130-7137.
[36] ZHOU L, ZHOU W C, CHEN M L, et al. Dielectric and microwave absorbing properties of low power plasma sprayed Al2O3/Nb composite coatings[J]. Materials Science and Engineering: B, 2011, 176(18): 1456-1462.
[37] BIN W, BRUSCHI A, CIRANT S, et al. Absorbing coatings for high power millimeter-wave devices and matched loads[J]. Fusion Engineering and Design, 2013, 88(9-10): 2510-2514.
[38] BARTULI C, CIPRI F, VALENTE T. Thermal spraying and the fabrication of coatings with tailored electromagnetic properties[J]. Inorganica Chimica Acta, 2008, 361(14-15): 4077-4088.
[1] 汪勇, 周新远, 宋占永, 黄艳斐, 张伟. 不同热喷涂技术制备铁基涂层摩擦学性能研究[J]. 材料工程, 2013, 0(10): 48-52.
[2] 栗卓新, 祝弘滨, 李辉, 孙日超. 热喷涂金属陶瓷复合涂层研究进展[J]. 材料工程, 2012, 0(5): 93-98.
[3] 张志彬, 梁秀兵, 陈永雄, 徐滨士. 热喷涂工艺制备铝基非晶态合金材料研究进展[J]. 材料工程, 2012, 0(2): 86-90.
[4] 张林伟, 魏琪, 李辉, 栗卓新. 热喷涂粒子氧化机理分析及其保护方法概述[J]. 材料工程, 2009, 0(6): 78-82.
[5] 马成勇, 程海峰, 唐耿平, 楚增勇, 谢炜. 三层雷达吸波涂层的吸波性能研究[J]. 材料工程, 2008, 0(1): 11-13.
[6] 于名讯, 丁文皓, 李云南, 何华辉. 毫米波/厘米波兼容吸波涂层的设计与研究[J]. 材料工程, 2007, 0(7): 12-15.
[7] 王华. 透明导电氧化物薄膜及其制备方法[J]. 材料工程, 2005, 0(9): 59-63.
[8] 姚秀荣, 韩杰才, 刘兆晶, 高跃岗, 李凤珍, 任善之. 原位生成球状VC颗粒增强不锈钢基复合材料的制备工艺优化[J]. 材料工程, 2005, 0(8): 59-63.
[9] 刘荣军, 张长瑞, 周新贵, 曹英斌, 刘晓阳. CVD SiC致密表面涂层制备及表征[J]. 材料工程, 2005, 0(4): 3-6.
[10] 唐邦铭, 梁子青, 益小苏. 复合材料RFI成形用树脂膜的成膜工艺性研究[J]. 材料工程, 2005, 0(4): 46-49.
[11] 黄大庆, 哈恩华, 何山, 丁鹤雁. 宽频段雷达表面波衰减特征规律研究[J]. 材料工程, 2005, 0(3): 33-36.
[12] 叶斌, 何新波, 曲选辉, 秦明礼, 胡学晟. 制备工艺对Cf/SiC复合材料力学性能的影响[J]. 材料工程, 2004, 0(8): 47-50.
[13] 王海斗, 庄大明, 王昆林, 刘家浚. 离子硫化层与热喷涂硫化层的摩擦学性能比较[J]. 材料工程, 2003, 0(3): 14-16,43.
[14] 王晓红, 刘俊能. 吸波涂层斜入射特性研究[J]. 材料工程, 2002, 0(12): 41-43.
[15] 梁秀兵, 邓智昌, 许一, 徐滨士. 热喷涂纳米粉体材料及其涂层制备[J]. 材料工程, 2002, 0(11): 38-41.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn