Please wait a minute...
 
材料工程  2015, Vol. 43 Issue (4): 42-46    DOI: 10.11868/j.issn.1001-4381.2015.04.008
  材料与工艺 本期目录 | 过刊浏览 | 高级检索 |
HDPE/EG/石蜡导热定形相变材料的制备及性能
刘菁伟1,2, 杨文彬1,2, 谢长琼1,2, 张凯3, 范敬辉3
1. 西南科技大学 四川省非金属复合与功能材料国家重点实验室 培育基地, 四川 绵阳 621010;
2. 西南科技大学 教育部生物质材料工程研究中心, 四川 绵阳 621010;
3. 中国工程 物理研究院 总体工程研究所, 四川 绵阳 621900
Preparation and Properties of HDPE/EG/Paraffin Thermal Conducting Shape-stabilized Phase Change Material
LIU Jing-wei1,2, YANG Wen-bin1,2, XIE Chang-qiong1,2, ZHANG Kai3, FAN Jing-hui3
1. State Key Laboratory Cultivation Base for Nonmetal Composite and Functional Materials, Southwest University of Science and Technology, Mianyang 621010, Sichuan, China;
2. Engineering Research Center of Biomass Materials(Ministry of Education), Southwest University of Science and Technology, Mianyang 621010, Sichuan, China;
3. Institute of System Engineering, China Academy of Engineering Physics, Mianyang 621900, Sichuan, China
全文: PDF(1586 KB)   HTML()
输出: BibTeX | EndNote (RIS)      
摘要 采用熔融共混法制备高密度聚乙烯(HDPE)/膨胀石墨(EG)/石蜡导热定形相变材料(PCM),并对其渗漏率、微观形貌、导热性能和相变潜热进行研究。结果表明:导热定形相变材料中,HDPE,EG和石蜡三种组分具有较好的相容性;PCM中添加EG时渗漏率有所提高,但渗漏率随EG含量的增加而降低;EG含量为15%(质量分数)时,PCM渗漏率低于0.6%;PCM热导率随EG含量的增加而增加,EG含量为15%时,热导率达到1.265W/(m·K);PCM的相变潜热随EG含量的增加变化不大。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
刘菁伟
杨文彬
谢长琼
张凯
范敬辉
关键词 相变材料渗漏率热导率相变焓    
Abstract:The high density polyethylene(HDPE)/expanded graphite(EG)/paraffin thermal conducting shape-stabilized phase change materials(PCM) was prepared by melt blending method.The leakage rate, microstructure, thermal conductivity and latent heat of the composites were studied. The results show that the HDPE, EG and paraffin could be uniformly mixed. The leakage rate of PCM increases when EG is added, but decreases with the increasing of EG content. When the mass fraction of EG is 15%, the leakage rate of PCM is less than 0.6%. The thermal conductivity of PCM increases with the increasing of EG content. The value of thermal conductivity is 1.265W/(m·K) when the mass fraction of EG is 15%. The latent heat of PCM is not changed with the increasing of the EG content.
Key wordsphase change material    leakage rate    thermal conductivity    phase change enthalpy
收稿日期: 2014-01-03      出版日期: 2015-04-20
中图分类号:  TB332  
基金资助:国家自然科学基金委员会-中国工程物理研究院联合基金资助项目(11176025);四川省教育厅重大培育项目资助(14CZ0011);四川省科技创新苗子工程重大项目资助(2014-14);西南科技大学研究生创新基金资助项目(14ycx021)
通讯作者: 杨文彬(1971―),男,教授,从事高分子复合材料研究工作,联系地址:四川省绵阳市涪城区西南科技大学材料科学与工程学院(621010),yangwenbin@swust.edu.cn     E-mail: yangwenbin@swust.edu.cn
引用本文:   
刘菁伟, 杨文彬, 谢长琼, 张凯, 范敬辉. HDPE/EG/石蜡导热定形相变材料的制备及性能[J]. 材料工程, 2015, 43(4): 42-46.
LIU Jing-wei, YANG Wen-bin, XIE Chang-qiong, ZHANG Kai, FAN Jing-hui. Preparation and Properties of HDPE/EG/Paraffin Thermal Conducting Shape-stabilized Phase Change Material. Journal of Materials Engineering, 2015, 43(4): 42-46.
链接本文:  
http://jme.biam.ac.cn/CN/10.11868/j.issn.1001-4381.2015.04.008      或      http://jme.biam.ac.cn/CN/Y2015/V43/I4/42
[1] HADJIEVA M,KANEV S,ARGIROV J.Thermophysical properties of some paraffins applicable to thermal energy storage[J].Solar Energy Storage Materials & Solar Cells,1992,27(2):181-187.
[2] SHARMA A,TYAGI V V,CHEN C R,et al. Review on thermal energy storage with phase change materials and applications[J]. Renewable and Sustainable Energy Reviews,2009,13(2):318-345.
[3] ZHANG Y L,WANG S F,RAO Z H, et al.Experiment on heat storage characteristic of microencapsulated phase change material slurry[J]. Solar Energy Materials & Solar Cells,2011,95(10):2726-2733.
[4] MOLEFI J A,LUYTA S,KRUPA I. Comparison of LDPE,LLDPE and HDPE as matrices for phase change materials based on a soft Fischer-Tropsch paraffin wax[J]. Thermochimica Acta, 2010,500(1-2):88-92.
[5] SARI A. Form-stable paraffin/high density polyethylene composites as solid-liquid phase change material for thermal energy storage:preparation and thermal properties[J]. Energy Conversion Management,2004,45(13-14):2033-2042.
[6] 秦鹏华,杨睿,张寅平,等.定形相变材料的热性能[J].清华大学学报:自然科学版,2003,43(6):833-835.QIN P H,YANG R,ZHANG Y P, et al. Thermal performance of shape-stabilized phase-change materials[J]. Journal of Tsinghua University:Science & Technology,2003,43(6):833-835.
[7] ZHANG Z G,ZHANG N,PENG J,et al. Preparation and thermal energy storage properties of paraffin/expanded graphite composite phase change material[J].Applied Energy,2012,91(1):426-431.
[8] ZHANG Z G,FANG X M. Study on paraffin/expanded graphite composite phase change thermal energy storage material[J]. Energy Conversion and Management,2006,47(3):303-310.
[9] SARI A,KARAIPEKLI A.Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material[J]. Applied Thermal Engineering,2007,27(8-9):1271-1277.
[10] 张秀荣,朱冬生,高进伟,等.石墨/石蜡复合相变储热材料的热性能研究[J].材料研究学报,2010,24(3):332-336. ZHANG X R,ZHU D S,GAO J W, et al. Study on thermal properties of graphite/paraffin composites as phase change heat storage material[J]. Chinese Journal of Materials Research, 2010,24(3):332-336.
[11] FAN LW,KHODADADI J M.Thermal conductivity enhancement of phase change materials for thermal energy storage:a review[J]. Renewable and Sustainable Energy Reviews,2011,15(1):24-46.
[12] ZHANG P,HU Y,LEI S, et al.Effect of expanded graphite on properties of high-density polyethylene/paraffin composite with intumescent flame retardant as a shape-stabilized phase change material[J]. Solar Energy Materials & Solar Cells,2010,94(2):360-365.
[13] PINCEMIN S,OLIVES R,PY X,et al. Highly conductive composites made of phase change materials and graphite for thermal storage[J]. Solar Energy Materials & Solar Cells,2008,92(6):603-613.
[14] 丁剑红,张寅平,王馨,等.掺杂对定形相变材料导热系数的影响[J]. 太阳能学报,2005,26(6):853-856. DING J H,ZHANG Y P,WANG X,et al.The influence of doping materials to the thermal conductivity of shape-stabilized phase change material[J]. Acta Energiae Solaris Sinica,2005,26(6):853-856.
[15] 汪向磊,郭全贵,王立勇,等.高导热定形聚乙烯/石蜡/膨胀石墨相变复合材料的研究[J].功能材料,2013,44(23):1-5. WANG X L,GUO Q G,WANG L Y,et al.Thermal conductivity enhancement of form-stable HDPE/paraffin by expanded graphite addition[J]. Journal of Functional Materials,2013,44(23):1-5.
[16] YU A P,RAMESHP, SUN X B, et al. Enhanced thermal conductivity in a hybrid graphite nanoplatelet-carbon nanotube filler for epoxy composites[J]. Advanced Materials,2008,20(24):4740-4744.
[17] 夏莉,张鹏,周圆,等.石蜡与石蜡/膨胀石墨复合材料充/放热性能研究[J].太阳能学报,2010,31(5):610-614. XIA L,ZHANG P,ZHOU Y,et al.Study on the charging/discharging characteristics of paraffin and paraffin/expanded graphite composite material[J]. Acta Energiae Solaris Sinica,2010,31(5):610-614.
[1] 白明洁, 刘金龙, 齐志娜, 何江, 魏俊俊, 苗建印, 李成明. 石墨烯纳米流体研究进展[J]. 材料工程, 2020, 48(4): 46-59.
[2] 代晓腾, 马鸣龙, 张奎, 李永军, 袁家伟, 刘小稻, 王胜青. Ce对铸态Mg-6Zn合金组织与导热性能的影响[J]. 材料工程, 2020, 48(1): 92-97.
[3] 陈颖, 姜庆辉, 辛集武, 李鑫, 孙兵杨, 杨君友. 相变储能材料及其应用研究进展[J]. 材料工程, 2019, 47(7): 1-10.
[4] 徐斌, 陈程华, 张彩霞, 鲁聪达, 倪忠进. 热分解法制备Cu空心微球及其光热转换性能[J]. 材料工程, 2019, 47(7): 57-63.
[5] 于长清, 陈利, 裴雨辰. 碳纤维表面涂层对碳纤维增强锂铝硅玻璃陶瓷复合材料热导率的影响[J]. 材料工程, 2018, 46(6): 101-105.
[6] 何鹏, 耿慧远. 先进热管理材料研究进展[J]. 材料工程, 2018, 46(4): 1-11.
[7] 袁佟, 邓畅光, 毛杰, 邓春明, 邓子谦. 等离子喷涂-物理气相沉积制备7YSZ热障涂层及其热导率研究[J]. 材料工程, 2017, 45(7): 1-6.
[8] 林森, 孙仕勇, 邹翔, 郭鹏云. 改性蒙脱石/石蜡相变储热微囊的制备与性能表征[J]. 材料工程, 2017, 45(3): 35-40.
[9] 刘猛, 白书欣, 李顺, 赵恂, 熊德赣. 界面改性对SiCp/Cu复合材料热物理性能的影响[J]. 材料工程, 2016, 44(8): 11-16.
[10] 吴贺君, 卢灿辉, 李庆业, 胡彪. 固相剪切碾磨制备铝粉填充聚乙烯基高性能导热复合材料的研究[J]. 材料工程, 2016, 44(4): 39-44.
[11] 郝勇敢, 邵先坤, 唐海娣, 汪涛, 刘佳佳, 李本侠. 石蜡/TiO2/活性炭复合相变材料的制备及其性能[J]. 材料工程, 2016, 44(11): 51-55.
[12] 尚建丽, 张浩, 熊磊, 麻向龙. 基于均匀设计优化制备癸酸-棕榈酸/SiO2复合相变材料[J]. 材料工程, 2015, 43(9): 94-102.
[13] 喻胜飞, 罗武生. 石蜡/聚脲相变微胶囊的制备及表征[J]. 材料工程, 2015, 43(7): 100-104.
[14] 刘猛, 白书欣, 李顺, 赵恂, 熊德赣. 界面设计对Sip/Al复合材料组织和性能的影响[J]. 材料工程, 2014, 0(8): 61-66.
[15] 段远源, 于海童, 王晓东, 赵俊杰. 含水量及相关散射对气凝胶辐射传热的影响[J]. 材料工程, 2014, 0(2): 65-69.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn