Please wait a minute...
 
材料工程  2015, Vol. 43 Issue (4): 102-114    DOI: 10.11868/j.issn.1001-4381.2015.04.018
  综述 本期目录 | 过刊浏览 | 高级检索 |
搅拌摩擦点焊技术及其研究现状
傅田, 李文亚, 杨夏炜, 李锦锋, 高大路
西北工业大学 凝固技术国家重点实验室, 西安 710072
State-of-the-art of Friction Stir Spot Welding
FU Tian, LI Wen-ya, YANG Xia-wei, LI Jin-feng, GAO Da-lu
State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072, China
全文: PDF(2648 KB)  
输出: BibTeX | EndNote (RIS)      
摘要 鉴于搅拌摩擦点焊受到国内外越来越多学者的关注研究,本文在大量文献分析的基础上对搅拌摩擦点焊进行了分类和总结。详细综述了搅拌摩擦点焊的工艺方法、接头组织和力学性能以及焊接过程数值模拟等方面的研究,归纳了该工艺在航空、航天和汽车领域的应用,最后,分析了搅拌摩擦点焊当前存在的主要问题。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
傅田
李文亚
杨夏炜
李锦锋
高大路
关键词 搅拌摩擦点焊组织力学性能数值模拟    
Abstract:Because friction stir spot welding(FSSW) got more and more attention from researchers worldwide, this paper summarized on FSSW based on the open literatures. The process, microstructural characteristics, mechanical properties and numerical simulations of FSSW were reviewed in detail. And then, the applications of FSSW in aerospace, aviation and automobile fields were summed up. Finally, the current problems and issues in FSSW were discussed.
Key wordsfriction stir spot welding    microstructure    mechanical property    numerical simulation
收稿日期: 2014-02-26     
1:  TG44  
通讯作者: 李文亚(1976-),男,教授,博士生导师,主要从事冷喷涂及摩擦焊接技术方面的研究工作,联系地址:陕西省西安市友谊西路127号西北工业大学材料学院(710072),liwy@nwpu.edu.cn     E-mail: liwy@nwpu.edu.cn
引用本文:   
傅田, 李文亚, 杨夏炜, 李锦锋, 高大路. 搅拌摩擦点焊技术及其研究现状[J]. 材料工程, 2015, 43(4): 102-114.
FU Tian, LI Wen-ya, YANG Xia-wei, LI Jin-feng, GAO Da-lu. State-of-the-art of Friction Stir Spot Welding. Journal of Materials Engineering, 2015, 43(4): 102-114.
链接本文:  
http://jme.biam.ac.cn/jme/CN/10.11868/j.issn.1001-4381.2015.04.018      或      http://jme.biam.ac.cn/jme/CN/Y2015/V43/I4/102
[1] 任淑荣, 马宗义, 陈礼清. 搅拌摩擦焊接及其加工研究现状与展望[J]. 材料导报,2007,21(1):86-92.REN S R, MA Z Y, CHEN L Q. Research status and prospect of friction stir welding and friction stir processing[J]. Materials Review,2007,21(1):86-92.
[2] 李晓辉, 汪苏, 夏彩云. 双焦点激光焊接工艺参数对焊缝成形影响[J]. 航空材料学报,2008,28(1):45-48. LI X H, WANG S, XIA C Y. Effect of welding parameters on formation of double-focus welds[J]. Journal of Aeronautical Materials,2008,28(1):45-48.
[3] 赵衍华, 张丽娜, 刘景铎, 等. 搅拌摩擦点焊技术简介[J]. 航天制造技术,2009,2(4):1-5.ZHAO Y H, ZHANG L N, LIU J D, et al. Introduction of friction stir spot welding technology[J]. Aerospace Manufacturing Technology,2009,2(4):1-5.
[4] THOMAS W M, NICHOLAS E D, NEEDHAM J C, et al. Friction Stir Welding[P]. Great Britain Patent:9125978.8,1991-12-06.
[5] MISHRA R S, MA Z Y. Friction stir welding and processing[J]. Materials Science and Engineering:R,2005,50(1-2):1-78.
[6] 魏世同, 郝传勇. 01420 铝锂合金的搅拌摩擦焊接[J]. 航空材料学报,2006,26(6):21-25.WEI S T,HAO C Y. Friction stir welding process of 01420 aluminum-lithium alloy[J]. Journal of Aeronautical Materials,2006,26(6):21-25.
[7] DAWES C J. An introduction to friction stir welding and its development[J]. Welding and Metal Fabrication,1995,63(1):12-16.
[8] RHODES C G, MAHONEY M W. Effect of friction stir welding on micro structure of 7075 aluminum[J]. Scripta Materialia,1997,36(1):69-75.
[9] DAWES C J, THOMAS W M. Friction stir process welds aluminium alloys:the process produces low-distortion,high-quality,low-cost welds on aluminium[J].Welding Journal,1996,75(3):41-45.
[10] 汪洪峰, 左敦稳, 邵定林, 等. 工艺参数对搅拌摩擦焊7022铝合金残余应力及耐磨耐蚀性能的影响[J]. 航空材料学报,2011,31(1):31-37. WANG H F, ZUO D W, SHAO D L, et al. Effect of process parameters on residual stress and wear and corrosion resistance of 7022 aluminium alloy by FSW[J]. Journal of Aeronautical Materials,2011,31(1):31-37.
[11] 代建辉, 赵华夏, 栾国红. 无针搅拌摩擦点焊技术研究现状分析[J]. 航空制造技术,2013,(11):52-55. DAI J H, ZHAO H X, LUAN G H. Research status of friction stir spot welding without needle[J]. Aerospace Manufacturing Technology,2013,(11):52-55.
[12] SAKANO R, MURAKAMI K, YAMASHITA K, et al. Development of spot FSW robot system for automobile body members[A]. 3rd International Symposium of Friction Stir Welding[C]. Kobe,Japan:TWI,2004.
[13] NGUYEN N T, KIM D Y, KIM H Y, et al. Assessment of the failure load for an AA6061-T6 friction stir spot welding joint[J]. Proceedings of the Institution of Mechanical Engineers, Part B:Journal of Engineering Manufacture,2011,225(10):1746-1756.
[14] SCHILLING C, DOS SANTOS J. Method and device for linking at least two adjoining work pieces by friction welding[P]. USA Patent:6722556B2,2004-04-20.
[15] 杨洪刚, 赵欣. 铝合金回填式搅拌摩擦点焊工艺试验[J]. 焊接技术,2012,41(11):24-26. YAMG H G, ZHAO X. Technological test on backfilling friction stir spot welding of Al alloy[J]. Welding Technology,2012,41(11):24-26.
[16] 王朗, 王敏, 郭立杰. LY12铝合金回填式搅拌摩擦点焊工艺研究[J]. 热加工工艺,2013,42(1):150-153. WANG L, WANG M, GUO L J. Research on backfilling friction stir spot welding of LY12 Al alloy[J]. Hot Working Technology,2013,42(1):150-153.
[17] TOZAKI Y, UEMATSU Y, TOKAJI K. A newly developed tool without probe for friction stir spot welding and its performance[J]. Journal of Materials Processing Technology,2010,210(6-7):844-851.
[18] BAKAVOS D, PRANGNELL P B. Effect of reduced or zero pin length and anvil insulation on friction stir spot welding thin gauge 6111 automotive sheet[J]. Science and Technology of Welding and Joining,2009,14(5):443-456.
[19] COX C D, GIBSON B T,STRAUSS A M. Effect of pin length and rotation rate on the tensile strength of a friction stir spot-welded Al alloy:a contribution to automated production[J]. Materials and Manufacturing Processes,2012,27(4):472-478.
[20] PRANGNELL P B, BAKAVOS D. Novel approaches to friction spot welding thin aluminium automotive sheet[J]. Materials Science Forum,2010,638-642:1237-1242.
[21] 方圆. 无匙孔搅拌摩擦点焊工艺及接头性能研究[D]. 镇江:江苏科技大学,2009. FANG Y. Research on property and technology of friction stir spot welding with no probe hole[D]. Zhenjiang:Jiangsu University of Science and Technology,2009.
[22] SUN Y F, FUJII H, TAKAKI N, et al. Microstructure and mechanical properties of mild steel joints prepared by a flat friction stir spot welding technique[J]. Materials and Design,2012,37:384-392.
[23] SUN Y F, FUJII H, TAKAKI N, et al. Novel spot friction stir welding of 6061 and 5052 Al alloys[J]. Science and Technology of Welding and Joining,2011,16(7):605-612.
[24] SUN Y F, FUJII H, TAKAKI N, et al. Microstructure and mechanical properties of dissimilar Al alloy/steel joints prepared by a flat spot friction stir welding technique[J]. Materials and Design,2013,47:350-357.
[25] VENUKUMAR S, YALAGI S G, MUTHUKUMARAN S, et al. Static shear strength and fatigue life of refill friction stir spot welded AA6061-T6 sheets[J]. Science and Technology of Welding and Joining,2014,19(3):214-223.
[26] BILICI M K, YVKLER A I. Influence of tool geometry and process parameters on macrostructure and static strength in friction stir spot welded polyethylene sheets[J]. Materials and Design,2012,33:145-152.
[27] WANG D A, LEE S C. Microstructures and failure mechanisms of friction stir spot welds of aluminum 6061-T6 sheets[J]. Journal of Materials Processing Technology,2007,186(1):291-297.
[28] WANG D A, CHAO C W, LIN P C, et al. Mechanical characterization of friction stir spot microwelds[J]. Journal of Materials Processing Technology,2010,210(14):1942-1948.
[29] 严铿, 黎志云, 付娟. 复合搅拌摩擦点焊接头的金属流动行为[J]. 江苏科技大学学报:自然科学版,2008,22(2):35-38. YAN K, LI Z Y, FU J. Metallic flowing behavior of Com-stirTM friction stir spot welding joint[J]. Journal of Jiangsu University of Science and Technology:Natural Science Edition,2008,22(2):35-38.
[30] BAEK S W, CHOI D H, LEE C Y, et al. Microstructure and mechanical properties of friction stir spot welded galvanized steel[J]. Materials Transactions,2010,51(5):1044-1050.
[31] YUAN W, MISHRA R S, WEBB S. Effect of tool design and process parameters on properties of Al alloy 6016 friction stir spot welds[J]. Journal of Materials Processing Technology,2011,211(6):972-977.
[32] LI W Y, LI J F,GAO D L, et al. Pinless friction stir spot welding of 2024 aluminum alloy:effect of welding parameters[A]. 7th Asia Pacific IIW International Congress[C]. Singapore:International Institute of Welding,2013.72-77.
[33] CHEN Y C, KOMAZAKI T, TSUMURA T,et al. Role of zinc coat in friction stir lap welding Al and zinc coated steel[J]. Materials Science and Technology,2008,24(1):33-39.
[34] FENG K, WATANABE M, KUMAI S. Microstructure and joint strength of friction stir spot welded 6022 aluminum alloy sheets and plated steel sheets[J]. Materials Transactions,2011,52(7):1418-1425.
[35] ROSENDO T, PARRA B, TIER M A D, et al. Mechanical and microstructural investigation of friction spot welded AA6181-T4 aluminium alloy[J]. Materials and Design,2011,32(3):1094-1100.
[36] 蒋若蓉, 李文亚, 杨夏炜, 等. 薄板铝合金无针搅拌摩擦焊搭接接头性能研究[A]. 第十八次全国焊接学术会议论文集[C]. 南昌:中国机械工程学会焊接学会,2013. JIANG R R, LI W Y, YANG X W, et al. Research on pinless friction stir spot welding lap joints of aluminum alloy sheet[A]. 18th National Symposium of Welding[C]. Nanchang:CMES,2013.
[37] UEMATSU Y, TOKAII K, TOZAKI Y, et al. Effect of re-filling probe hole on tensile failure and fatigue behaviour of friction stir spot welded joints in Al-Mg-Si alloy[J]. International Journal of Fatigue,2008,30(10):1956-1966.
[38] BADARINARAYAN H, YANG Q, ZHU S. Effect of tool geometry on static strength of friction stir spot-welded aluminum alloy[J]. International Journal of Machine Tools and Manufacture,2009,49(2):142-148.
[39] BADARINARAYAN H, SHI Y, LI X. Effect of tool geometry on Hook formation and static strength of friction stir spot welded aluminum 5754-O sheets[J]. International Journal of Machine Tools and Manufacture,2009,49(11):814-823.
[40] SHEN Z K, YANG X Q, ZHANG Z H, et al. Microstructure and failure mechanisms of refill friction stir spot welded 7075-T6 aluminum alloy joints[J]. Materials and Design,2013,44:476-486.
[41] SHEN Z, YANG X, YANG S, et al. Microstructure and mechanical properties of friction spot welded 6061-T4 aluminum alloy[J]. Materials and Design,2014,54:766-778.
[42] OLIVEIRAl P H F, AMANCIO-FILHO S T, DOS SANTOS J F, et al. Preliminary study on the feasibility of friction spot welding in PMMA[J]. Materials Letters,2010,64(19):2098-2101.
[43] ZHANG Z H, YANG X Q, ZHANG J L. Effect of welding parameters on microstructure and mechanical properties of friction stir spot welded 5052 aluminum alloy[J]. Materials and Design,2011,32(8):4461-4470.
[44] YIN Y H, IKUTA A, NORTH T H. Microstructural features and mechanical properties of AM60 and AZ31 friction stir spot welds[J]. Materials and Design,2010,31(10):4764-4776.
[45] YAMAMOTO M, GERLICH A, NORTH T H, et al. Cracking in dissimilar Mg alloy friction stir spot welds[J]. Science and Technology of Welding and Joining,2008,13(7):583-592.
[46] SANTOS T G, MIRANDA R M, VILACA P, et al. Microstructural mapping of friction stir welded AA7075-T6 and AlMgSc alloys using electrical conductivity[J]. Science and Technology of Welding and Joining,2011,16:630-635.
[47] YIN Y H, SUN N, NORTH T H, et al. Microstructures and mechanical properties in dissimilar AZ91/AZ31 spot welds[J]. Materials Characterization,2010,61(10):1018-1028.
[48] SU P, GERLICH A P, NORTH T H, et al. Intermixing in dissimilar friction stir spot welds[J]. Metallurgical and Materials Transactions A,2007,38(3):584-595.
[49] TOZAKI Y, UEMATSU Y, TOKAJI K. Effect of tool geometry on microstructure and static strength in friction stir spot welded aluminium alloys[J]. International Journal of Machine Tools and Manufacture,2007,47(15):2230-2236.
[50] LIN Y C, LIU J J, LIN B Y. Effects of process parameters on strength of Mg alloy AZ61 friction stir spot welds[J]. Materials and Design,2012,35:350-357.
[51] MUSTAFA K B, AHMET I Y. Effects of welding parameters on friction stir spot welding of high density polyethylene sheets[J]. Materials and Design,2012,33:545-550.
[52] YIN Y H, SUN N, NORTH T H, et al. Influence of tool design on mechanical properties of AZ31 friction stir spot welds[J]. Science and Technology of Welding and Joining,2010,14(1):81-86.
[53] CAMPANELLI L C, SUHUDDIN U F H, ANTONIALLI A  S, et al. Metallurgy and mechanical performance of AZ31 magnesium alloy friction spot welds[J]. Journal of Materials Processing Technology,2013,213(4):515-521.
[54] TRAN V X, PAN J, PAN T. Effects of processing time on strengths and failure modes of dissimilar spot friction welds between aluminum 5754-O and 7075-T6 sheets[J]. Journal of Materials Processing Technology,2009,209(8):3724-3739.
[55] BILICI M K. Application of Taguchi approach to optimize friction stir spot welding parameters of polypropylene[J]. Materials and Design,2012,35:113-119.
[56] CHOI D H, AHN B W, LEE C Y, et al. Effect of pin shapes on joint characteristics of friction stir spot welded AA5J32 sheet[J]. Materials Transactions,2010,51(5):1028-1032.
[57] SHIN H S, JUNG Y C. Characteristics of dissimilar friction stir spot welding of bulk metallic glass to light weight crystalline metals[J]. Intermetallics,2010,18(10):2000-2004.
[58] SHIN H S, JUNG Y C. Characteristics of friction stir spot welding of Zr-based bulk metallic glass sheets[J]. Journal of Alloys and Compounds,2010,504(1):279-282.
[59] PRAKASH S J, MUTHUKUMARAN S. Refilling probe hole of friction spot joints by friction forming[J]. Materials and Manufacturing Processes,2011,26(12):1539-1545.
[60] SIMONCINIA M, FORCELLESE A. Effect of the welding parameters and tool configuration on micro- and macro-mechanical properties of similar and dissimilar FSWed joints in AA5754 and AZ31 thin sheets[J]. Materials and Design,2012,41:50-60.
[61] FORCELLESE A, GABRIELLI F, SIMONCINI M. Mechanical properties and microstructure of joints in AZ31 thin sheets obtained by friction stir welding using "pin" and "pinless" tool configurations[J]. Materials and Design,2012,34:219-229.
[62] TRAN V X, PAN J, PAN T. Fatigue behavior of spot friction welds in lap-shear and cross-tension specimens of dissimilar aluminum sheets[J]. International Journal of Fatigue,2010,32(7):1022-1041.
[63] UEMATSU Y, TOKAJI K, TOZAKI Y. Fatigue behaviour of dissimilar friction stir spot weld between A6061 and SPCC welded by a scrolled groove shoulder tool[J]. Procedia Engineering,2010,2(1):193-201.
[64] JORDON J B, HORSTEMEYER M F, DANIEWICZ S R. Fatigue characterization and modeling of friction stir spot welds in magnesium AZ31 alloy[J]. Journal of Engineering Materials and Technology-Transactions,2010,132(4):041008.
[65] HASSANIFARD S, MOHAMMADPOUR M, RASHID H A. A novel method for improving fatigue life of friction stir spot welded joints using localized plasticity[J]. Materials and Design,2014,53:962-971.
[66] RAO H M, JORDON J B, BARKEY M E, et al. Influence of structural integrity on fatigue behavior of friction stir spot welded AZ31 Mg alloy[J]. Materials Science and Engineering:A,2013,564:369-380.
[67] UEMATSU Y, TOKAJI K, TOZAKI Y. Fatigue behaviour of dissimilar friction stir spot welds between A6061-T6 and low carbon steel sheets welded by a scroll grooved tool without probe[J]. Fatigue and Fracture of Engineering Materials and Structures,2011,34(8):581-591.
[68] UEMATSU Y, KAKIUCHI T, TOZAKI Y, et al. Comparative study of fatigue behaviour in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds fabricated by scroll grooved tool without probe[J]. Science and Technology of Welding and Joining,2012,17(5):348-356.
[69] TRAN V X, PAN J, PAN T. Fatigue behavior of aluminum 5754-O and 6111-T4 spot friction welds in lap-shear specimens[J].International Journal of Fatigue,2008,30(12):2175-2190.
[70] CHOWDHURY S H, CHEN D L, BHOLE S D, et al. Lap shear strength and fatigue behavior of friction stir spot welded dissimilar magnesium-to-aluminum joints with adhesive[J]. Materials Science and Engineering:A,2013,562:53-60.
[71] LIN P C, SU Z M, HE R Y, et al. Failure modes and fatigue life estimations of spot friction welds in cross-tension specimens of aluminum 6061-T6 sheets[J]. International Journal of Fatigue,2012,38:25-35.
[72] MUCI-KVCHLER K H, KALAGARA S, ARBEGAST W J. Simulation of a refill friction stir spot welding process using a fully coupled thermo-mechanical FEM model[J]. Journal of Manufacturing Science and Engineering,2010,132(1):014503.
[73] WANG D A, CHEN C H. Fatigue lives of friction stir spot welds in aluminum 6061-T6 sheets[J]. Journal of Materials Processing Technology,2009,209(1):367-375.
[74] AHMADI S R, HASSANIFARD S, POUR M M. Fatigue life prediction of friction stir spot welds based on cyclic strain range with hardness distribution and finite element analysis[J]. Acta Mechanica,2012,223(4):829-839.
[75] AWANG M, MUCINO V H. Energy generation during friction stir spot welding(FSSW) of Al6061-T6 plates[J]. Materials and Manufacturing Processes,2010,25(1-3):167-174.
[76] GERLICH A, SU P, NORTH T. Peak temperatures and microstructures in aluminum and magnesium alloy friction stir spot welds[J]. Science and Technology of Welding and Joining, 2005,10(6):647-652.
[77] ATHARIFAR H. Optimum parameters design for friction stir spot welding using a genetically optimized neural network system[J]. Journal of Engineering Manufacture,2010,224(3):403-417.
[78] KULEKCI M K, ESME U, ER O, et al. Modeling and prediction of weld shear strength in friction stir spot welding using design of experiments and neural network[J]. Materials Science and Engineering Technology,2011,42(11):990-995.
[79] KARTHIKEYAN R, BALASUBRAMANIAN V. Predictions of the optimized friction stir spot welding process parameters for joining AA2024 aluminum alloy using RSM[J]. The International Journal of Advanced Manufacturing Technology,2010,51(1-4):173-183.
[80] KIM D, BADARINARAYAN H, RYU I, et al. Numerical simulation of friction stir spot welding process for aluminum alloys[J]. Metals and Materials International,2010,16(2):323-332.
[81] ZHANG Z H, LI W Y, LI J F,et al. Numerical analysis on formation mechanism of Hook during pinless friction stir spot welding[A]. 7th Asia Pacific IIW International Congress[C]. Singapore:International Institute of Welding,2013.
[82] 丁荣辉, 黎文献, 路彦军, 等. 搅拌摩擦焊接技术最新进展[J]. 轻合金加工技术,2005,33(2):21-25. DING R H, LI W X, LU Y J, et al. Recent developments of friction stir welding[J]. Light Alloy Fabrication Technology,2005,33(2):21-25.
[83] 秦红珊, 杨新岐. 一种替代传统电阻点焊的创新技术——搅拌摩擦点焊[J]. 电焊机,2006,36(7):27-30. QIN H S, YANG X Q. A new innovative joining technology to replace conventional resistance spot welding-friction stir spot welding[J]. Electric Welding Machine,2006,36(7):27-30.
[84] 张健, 董春林, 李光, 等. 搅拌摩擦点焊在航空领域的应用[J]. 航空制造技术,2009,(16):70-73. ZHANG J, DONG C L, LI G, et al. Application of friction stir spot welding in aviation industry[J]. Aeronautical Manufacturing Technology,2009,(16):70-73.
[85] 秦红珊, 杨新岐. 搅拌摩擦点焊技术及在汽车工业应用前景[J]. 汽车技术,2006,(1):1-5. QIN H S, YANG X Q. Friction stir spot welding technology and its application in automotive industry[J]. Automobile Technology,2006,(1):1-5.
[1] 杨海青, 李青, 肖程波, 胡聘聘, 林山峰. Re及时效时间对耐腐蚀镍基定向合金组织和持久寿命的影响[J]. 材料工程, 2015, 43(6): 31-37.
[2] 王宁, 李健, 关志军, 谭凯. 工艺参数对钼粉烧结体近等温包套锻造成形过程中应变的影响[J]. 材料工程, 2015, 43(6): 46-51.
[3] 江陆, 孙新军, 李昭东, 雍岐龙, 王长军. 两相区回火温度对Mn-Mo系微合金钢亚稳奥氏体形成及力学性能的影响[J]. 材料工程, 2015, 43(5): 1-7.
[4] 李小强, 敖敬培, 李子阳, 李力, 屈盛官. CuMnNiCo钎料钎焊MGH956合金接头组织及力学性能研究[J]. 材料工程, 2015, 43(5): 21-26.
[5] 万同, 杨光瑞, 张婕, 王彪. 柠檬酸醚酯增塑剂的合成及增塑聚乳酸[J]. 材料工程, 2015, 43(5): 67-74.
[6] 卢棋, 何国球, 陈淑娟, 佘萌, 刘颺, 杨洋, 朱旻昊. 热机械训练过程中Fe-Mn-Si系形状记忆合金的组织演变[J]. 材料工程, 2015, 43(4): 8-12.
[7] 刘铭, 汝继刚, 臧金鑫, 张坤, 何维维, 王亮, 陈高红. 新型Al-Zn-Mg-Cu铝合金热稳定性研究[J]. 材料工程, 2015, 43(4): 13-18.
[8] 谭毅, 廖娇, 李佳艳, 石爽, 王清, 游小刚, 李鹏廷, 姜辛. 电子束熔炼Inconel740合金不同热处理状态下的组织演变与显微硬度[J]. 材料工程, 2015, 43(4): 19-24.
[9] 马彦, 陈朝辉. 1800℃热处理对PIP法C/SiC复合材料结构和性能的影响[J]. 材料工程, 2015, 43(4): 98-101.
[10] 彭建, 彭毅, 韩韡, 潘复生. 挤压温度对Mg-2Zn-Mn-0.5Nd镁合金组织和性能的影响[J]. 材料工程, 2015, 43(3): 23-27.
[11] 张同环, 周仕学, 牛海丽, 肖成柱, 王乃飞. 碳助磨制备纳米镁铝储氢合金的结构及储氢性能研究[J]. 材料工程, 2015, 43(3): 48-53.
[12] 刘鹏, 李士凯, 张元彬, 刘燕. 非晶增强铝基复合材料的微观结构及腐蚀性能[J]. 材料工程, 2015, 43(3): 67-71.
[13] 杨闯, 彭晓东, 刘静, 马亚芹, 王华. TC4钛合金低压真空氮化改性层的制备与性能[J]. 材料工程, 2015, 43(3): 78-82.
[14] 雷玉成, 龚晨诚, 罗雅, 肖波, 朱强. 激励电流对MGH956合金原位合金化TIG焊接头性能的影响[J]. 材料工程, 2015, 43(2): 7-13.
[15] 谷晓鹏, 段珍珍, 邓钢, 谷晓燕. S355J2W+N钢激光-MAG复合焊与MAG焊对比[J]. 材料工程, 2015, 43(2): 20-25.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn