Please wait a minute...
 
材料工程  2015, Vol. 43 Issue (9): 25-29    DOI: 10.11868/j.issn.1001-4381.2015.09.005
  材料与工艺 本期目录 | 过刊浏览 | 高级检索 |
超疏水铝合金表面的防覆冰和防黏附行为
晏忠钠, 车彦慧, 冯利邦, 强小虎, 刘艳花
兰州交通大学 机电工程学院, 兰州 730070
Anti-icing and Anti-adhesion Behavior of Superhydrophobic Aluminum Alloy Surface
YAN Zhong-na, CHE Yan-hui, FENG Li-bang, QIANG Xiao-hu, LIU Yan-hua
School of Mechatronic Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China
全文: PDF(2068 KB)   HTML()
输出: BibTeX | EndNote (RIS)      
摘要 通过硬脂酸的醇水溶液一步浸泡法成功获得超疏水铝合金表面,其水接触角可达156.2°,滚动角小于5°。利用接触角测试、扫描电镜、红外光谱观测、结冰实验与防黏附实验分别对超疏水铝合金表面的润湿性能、表面微结构、化学结构以及防覆冰和防黏附行为进行了研究。结果表明:所制得的超疏水表面是由微-纳"多孔"结构和疏水烃基长链所共同赋予的。正是由于其特殊的粗糙结构和化学组成,使得该超疏水表面表现出良好的防覆冰和防黏附行为。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
晏忠钠
车彦慧
冯利邦
强小虎
刘艳花
关键词 一步浸泡铝合金超疏水防覆冰防黏附    
Abstract:A superhydrophobic aluminum alloy surface was successfully prepared via a one-step immersion method in stearic acid-alcohol-water solution. The contact angle can reach 156.2° while the sliding angle is less than 5°. The wettability, surface microstructure and chemical structure, anti-icing, and anti-adhesion behavior were investigated by means of contact angle measurement, SEM, FT-IR, freezing and anti-adhesion experiments, respectively. Results indicate that the micro- and nano-scale porous structure together with the grafted hydrophobic alkyl long chains endows the aluminum alloy surface with the superhydrophobic property. Just grounded on the peculiar rough structure and chemical composition, the resulting superhydrophobic aluminum alloy surface possesses excellent anti-icing and anti-adhesion behavior.
Key wordsone-step immersion    aluminum alloy    superhydrophobic    anti-icing    anti-adhesion
收稿日期: 2014-10-22      出版日期: 2015-09-26
中图分类号:  TB383  
通讯作者: 冯利邦(1971-),男,博士,教授,主要从事功能界面材料的研究工作,联系地址:甘肃省兰州市安宁西路88号兰州交通大学406#(730070),E-mail:fenglb@mail.lzjtu.cn     E-mail: fenglb@mail.lzjtu.cn
引用本文:   
晏忠钠, 车彦慧, 冯利邦, 强小虎, 刘艳花. 超疏水铝合金表面的防覆冰和防黏附行为[J]. 材料工程, 2015, 43(9): 25-29.
YAN Zhong-na, CHE Yan-hui, FENG Li-bang, QIANG Xiao-hu, LIU Yan-hua. Anti-icing and Anti-adhesion Behavior of Superhydrophobic Aluminum Alloy Surface. Journal of Materials Engineering, 2015, 43(9): 25-29.
链接本文:  
http://jme.biam.ac.cn/CN/10.11868/j.issn.1001-4381.2015.09.005      或      http://jme.biam.ac.cn/CN/Y2015/V43/I9/25
[1] LI X Y, YANG B B, ZHANG Y Q, et al. A study on superhydrophobic coating in anti-icing of glass/porcelain insulator[J]. Journal of Sol-gel Science and Technology,2014,69(2):441-447.
[2] DOU R M, CHEN J, ZHANG Y F, et al. Anti-icing coating with an aqueous lubricating layer[J]. ACS Applied Materials Interfaces, 2014, 6(10): 6998-7003.
[3] BOINOVICH L B, EMELYANENKO A M. Anti-icing potential of superhydrophobic coatings[J]. Mendeleev Communications, 2013, 23(1): 3-10.
[4] RUAN M, LI W, WANG B S, et al. Preparation and anti-icing behavior of superhydrophobic surfaces on aluminum alloy substrates[J]. Langmuir, 2013, 29(27): 8482-8491.
[5] FILLION R M, RIAHI A R, EDRISY A. A review of icing prevention in photovoltaic devices by surface engineering[J]. Renewable and Sustainable Energy Reviews, 2014, 32: 797-809.
[6] 李松梅, 李彬, 刘建华,等. 铝合金表面用化学刻蚀和阳极氧化法制备的超疏水膜层的耐蚀性能[J]. 无机化学学报, 2012, 28(8): 1755-1762. LI Song-mei, LI Bin, LIU Jian-hua, et al. Corrosion resistance of superhydrophobic film on aluminum alloy surface fabricated by chemical etching and anodization[J]. Chinese Journal of Inorganic Chemistry, 2012, 28(8): 1755-1762.
[7] OBERLI L, CARUSO D, HALL C, et al. Condensation and freezing of droplets on superhydrophobic surfaces[J]. Advances in Colloid and Interface Science, 2014, 210(1): 47-57.
[8] WANG F C, LI C G, LV Y Z, et al. Ice accretion on superhydrophobic aluminum surfaces under low-temperature conditions[J]. Cold Regions Science and Technology, 2010, 62(1): 29-33.
[9] 汪怀远, 孟旸, 赵景岩, 等. 双疏表面的制备及性能研究新进展[J]. 材料工程, 2014, (3): 90-96. WANG Huai-yuan, MENG Yang, ZHAO Jing-yan, et al. New progress on preparation and properties of amphiphobic surface[J]. Journal of Materials Engineering, 2014, (3): 90-96.
[10] 李允伟, 李卫平, 刘慧丛, 等. 憎水膜层在大气暴露和模拟积水环境中的失效行为研究[J]. 材料工程, 2014, (8): 79-85. LI Yun-wei, LI Wei-ping, LIU Hui-cong, et al. Deterioration process of hydrophobic films exposed in atmosphere and simulated condensation water[J]. Journal of Materials Engineering, 2014, (8): 79-85.
[11] NAGAPPAN S, PARK J H, SUNG A R, et al. Superhydrophobic hybrid micro-nanocomposites for non-stick and self-cleaning coatings[J]. Composite Interfaces,2014,21(7):597-609.
[12] FENG L B, CHE Y H, LIU Y H, et al. Fabrication of superhydrophobic aluminium alloy surface with excellent corrosion resistance by a facile and environment-friendly method[J]. Applied Surface Science, 2013, 283(15): 367-374.
[13] FENG L B, ZHANG H X, WANG Z L, et al. Superhydrophobic aluminum alloy surface: fabrication, structure, and corrosion resistance[J]. Colloids and Surfaces A,2014,441(1):319-325.
[14] CASSIE A B D, BAXTER S. Wettability of porous surfaces[J]. Transactions of the Faraday Society,1944,40(1):546-551.
[15] BOREYKO J B, COLLIER C P. Delayed frost growth on jumping-drop superhydrophobic surfaces[J]. ACS Nano,2013,7(2):1618-1627.
[1] 冯昊, 符殿宝, 程佳乐, 唐寅林, 陈俊锋, 王晨, 邹林池. 压缩预变形对7050铝合金非等温时效析出行为的影响[J]. 材料工程, 2020, 48(9): 107-114.
[2] 栾建泽, 那景新, 谭伟, 慕文龙, 申浩, 秦国锋. 铝合金-BFRP粘接接头的服役高温老化力学性能及失效预测[J]. 材料工程, 2020, 48(9): 166-172.
[3] 段晓鸽, 江海涛, 米振莉, 王丽丽, 李萧. 轧制方式对6016铝合金薄板组织和塑性各向异性的影响[J]. 材料工程, 2020, 48(8): 134-141.
[4] 张桂源, 李于朋, 宫文彪, 宫明月, 崔恒. Zn对钢/铝异种金属搅拌摩擦焊接头界面组织及性能的影响[J]. 材料工程, 2020, 48(8): 149-156.
[5] 李为民, 彭超义, 杨金水, 邢素丽. PTFE/epoxy全有机超疏水涂层制备[J]. 材料工程, 2020, 48(7): 162-169.
[6] 王霞, 王辉, 侯丽, 蒋欢, 周雯洁. 超疏水防腐蚀涂层的研究进展[J]. 材料工程, 2020, 48(6): 73-81.
[7] 李亚, 邓运来, 张劲, 田爱琴, 张勇. 7050铝合金第二相溶解行为[J]. 材料工程, 2020, 48(4): 116-122.
[8] 安立辉, 苑世剑. 2219铝合金薄壁曲面件拉形过程变形均匀性[J]. 材料工程, 2020, 48(4): 123-130.
[9] 邓运来, 邓舒浩, 叶凌英, 林森, 孙琳, 吉华. 焊后热处理对AA7204-T4铝合金搅拌摩擦焊接头组织与力学性能的影响[J]. 材料工程, 2020, 48(4): 131-138.
[10] 李国伟, 梁亚红, 陈芙蓉, 韩永全. 7075铝合金脉冲变极性等离子弧焊接头的双级时效行为[J]. 材料工程, 2020, 48(2): 140-147.
[11] 范淑敏, 陈送义, 张星临, 周亮, 黄兰萍, 陈康华. 多级时效热处理对7056铝合金析出组织与耐蚀性的影响[J]. 材料工程, 2019, 47(6): 136-143.
[12] 张志斌, 尉小凤, 王海涛, 史雪婷, 冯利邦. 金属基超疏水表面的制备及性能研究进展[J]. 材料工程, 2019, 47(5): 26-33.
[13] 王玉洁, 张鹏, 王选, 杜云慧, 王胜林, 张伟一, 鹿红梅. 氧气流量对LY12铝合金微弧氧化膜致密性的影响[J]. 材料工程, 2019, 47(5): 86-92.
[14] 李惠, 肖文龙, 张艺镡, 马朝利. 多重结构Ti-B4C/Al2024复合材料的组织和力学性能[J]. 材料工程, 2019, 47(4): 152-159.
[15] 李卫, 陈康华, 焦慧彬, 周亮, 杨振, 陈送义. 微量Ge对7056铝合金组织和淬火敏感性的影响[J]. 材料工程, 2019, 47(3): 123-130.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn