Please wait a minute...
 
材料工程  2017, Vol. 45 Issue (8): 123-131    DOI: 10.11868/j.issn.1001-4381.2016.000571
  综述 本期目录 | 过刊浏览 | 高级检索 |
铝合金表面特性对其胶接性能影响的研究进展
王询, 林建平, 万海浪
同济大学 机械与能源工程学院, 上海 201804
Research Progress in Effect of Aluminum Surface Properties on Adhesively Bonded Performance
WANG Xun, LIN Jian-ping, WAN Hai-lang
School of Mechanical Engineering, Tongji University, Shanghai 201804, China
全文: PDF(5228 KB)   HTML()
输出: BibTeX | EndNote (RIS)      
摘要 不同的表面处理方法会导致铝合金表面的表面理化特性发生改变,从而对铝合金板材与胶黏剂的界面结合强度以及胶接接头的耐腐蚀性能有很大的影响。本文从铝合金表面粗糙度、微观织构、表面氧化层和涂层化学特性等方面入手,对铝合金胶接接头的界面强度和耐腐蚀性能影响的研究现状进行了综述。探讨了铝合金胶接研究发展趋势,并认为铝合金表面理化特性的参数化表征以及表面特性与胶接性能的关系模型建立等方面是今后研究的重要方向。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
王询
林建平
万海浪
关键词 铝合金表面特性胶接接头界面强度耐腐蚀性能    
Abstract:Surface physicochemical properties of aluminum alloy can be changed by different surface treatment methods, which determines the performance of adhesively bonded joints. This paper reviews the research status on the interfacial bonding strength and corrosion resistance of adhesively bonded aluminum alloys joints from the perspectives of surface roughness, surface micro-structure, surface oxide and coated chemistry properties. Then the problems and development of adhesively bonded aluminum alloys are discussed. The characterization of the aluminum surface physical and chemical properties and the relation model between the surface properties and the adhesive performance are considered to be focused directions for the further research.
Key wordsaluminum alloy    surface property    adhesively bonded joint    interfacial strength    corrosion resistance
收稿日期: 2016-05-16      出版日期: 2017-08-10
中图分类号:  TG495  
通讯作者: 林建平(1958-),男,教授,博士,研究方向:汽车轻量化与连接技术,联系地址:上海市曹安公路4800号同济大学机械与能源工程学院(201804),E-mail:jplin58@tongji.edu.cn     E-mail: jplin58@tongji.edu.cn
引用本文:   
王询, 林建平, 万海浪. 铝合金表面特性对其胶接性能影响的研究进展[J]. 材料工程, 2017, 45(8): 123-131.
WANG Xun, LIN Jian-ping, WAN Hai-lang. Research Progress in Effect of Aluminum Surface Properties on Adhesively Bonded Performance. Journal of Materials Engineering, 2017, 45(8): 123-131.
链接本文:  
http://jme.biam.ac.cn/CN/10.11868/j.issn.1001-4381.2016.000571      或      http://jme.biam.ac.cn/CN/Y2017/V45/I8/123
[1] EDWARD M P,CARY N C.Adhesive bonding of aluminum alloys[J].Metal Finishing,2007,105(9):49-56.
[2] 刘舒.汽车工业中胶黏剂的应用-结构粘接应用[J].中国胶黏剂,2004,13(5):60-62. LIU S.The application of adhesive in automobile industry[J].China Adhesives,2004,13(5):60-62.
[3] 李欣,张晓妮,徐晓沐.胶接结构和复合材料用于航空航天技术的发展[J].化学与粘合,2006,28(3):172-175. LI X,ZHANG X N,XU X M.The development of bonding structure and composite materials for the technology of aerospace[J].Chemistry and Adhesion,2006,28(3):172-175.
[4] 王起.国外民用客机连接技术发展概况[J].中国航空信息中心信息研究报告,1997,(3):21-22. WANG Q.Development of civil aircraft connecting technology in foreign countries[J].China Aviation Information Center Information Research Report,1997,(3):21-22.
[5] BALDAN A.Adhesion phenomena in bonded joints[J].International Journal of Adhesion and Adhesives,2012,38:95-116.
[6] 胡伟,蔡如琳,谭利敏,等.几种机械表面处理方法对6013铝合金接头胶接性能的影响[J].粘接,2014,(1):45-49. HU W,CAI R L,TAN L M,et al.Effects of several mechanical surface treatments on the 6013 aluminum alloy joints bonding properties[J].Adhesive,2014,(1):45-49.
[7] 刘晓静,陈春焕,赵志强.表面处理对5083铝合金板胶接性能的影响[J].理化检验:物理分册,2013,49(2):75-78. LIU X J,CHEN C H,ZHAO Z Q.Effects of surface treatment on adhesion strength of 5083 aluminum alloy plates[J].Physical Testing and Chemical Analysis Part A:Physical Testing,2013,49(2):75-78.
[8] POOLE P, WATTS J F. Effect of alloy composition and surface pretreatment on the durability of adhesive-bonded aluminium alloy joints[J]. International Journal of Adhesion and Adhesives, 1985, 5(1):33-39.
[9] MATSUZAKI R,TSUKAMOTO N,TANIGUCHI J.Mechanical interlocking by imprinting of undercut micropatterns for improving adhesive strength of polypropylene[J].International Journal of Adhesion and Adhesives,2016,68:124-132.
[10] KIM W S,YUN I H,LEE J J,et al.Evaluation of mechanical interlock effect on adhesion strength of polymer-metal interfaces using micro-patterned surface topography[J].International Journal of Adhesion and Adhesives,2010,30(6):408-417.
[11] BALDAN A.Adhesively-bonded joints and repairs in metallic alloys,polymers and composite materials:adhesives,adhesion theories and surface pretreatment[J].Journal of Materials Science,2004,39(1):1-49.
[12] SORRENTINO L,CARRINO L.Influence of process parameters of oxygen cold plasma treatment on wettability ageing time of 2024 aluminium alloy[J].International Journal of Adhesion and Adhesives,2009,29(2):136-143.
[13] MUI T S M,SILVA L L G,PRYSIAZHNYI V,et al.Polyurethane paint adhesion improvement on aluminum alloy treated by plasma jet and dielectric barrier discharge[J].Journal of Adhesion Science and Technology,2016,30(2):218-229.
[14] BABURAJ E G,STARIKOV D,EVANS J,et al.Enhancement of adhesive joint strength by laser surface modification[J].International Journal of Adhesion and Adhesives,2007,27(4):268-276.
[15] DAI G L, KWON J W, CHO D H. Hygrothermal effects on the strength of adhesively bonded joints[J]. Journal of Adhesion Science & Technology, 1998, 12(11):1253-1275.
[16] HUA D,LIN J,ZHANG B.Effects of salt spray on the mechanical properties of aluminum-epoxy adhesive joints[J].Journal of Adhesion Science and Technology,2013,27(14):1580-1589.
[17] HARRIS AF,BEEVERS A.The effects of grit-blasting on surface properties for adhesion[J].International Journal of Adhesion and Adhesives,1999,19(6):445-452.
[18] PROLONGO S G, ROSARIO G, UREÑA A. Study of the effect of substrate roughness on adhesive joints by SEM image analysis[J]. Journal of Adhesion Science & Technology, 2006, 20(5):457-470.
[19] KIM J G,CHOI I,LEE D G.Contact angle and wettability of hybrid surface-treated metal adherends[J].J Adhes Sci Technol,2013,27(7):794-810.
[20] GENT A N,LIN C W.Model studies of the effect of surface roughness and mechanical interlocking on adhesion[J].Journal of Adhesion,1990,32(2-3):113-125.
[21] BORSELLINO C,BELLA G D,RUISI V F.Adhesive joining of aluminium AA6082:the effects of resin and surface treatment[J].International Journal of Adhesion and Adhesives,2009,29(1):36-44.
[22] BOUTAR Y,NAÏMI S,MEZLINI S,et al.Effect of surface treatment on the shear strength of aluminium adhesive single-lap joints for automotive applications[J].International Journal of Adhesion and Adhesives,2016,67:38-43.
[23] SALEEMA N,SARKAR D K,PAYNTER R W,et al.A simple surface treatment and characterization of AA6061 aluminum alloy surface for adhesive bonding applications[J].Applied Surface Science,2012,261:742-748.
[24] PEREIRA A M,FERREIRA J M,ANTUNES F V,et al.Analysis of manufacturing parameters on the shear strength of aluminum adhesive single-lap joints[J].Journal of Materials Processing Technology,2010,210(4):610-617.
[25] RUDAWSKA A.Selected aspects of the effect of mechanical treatment on surface roughness and adhesive joint strength of steel sheets[J].International Journal of Adhesion and Adhesives,2014,50:235-243.
[26] SHAHID M,HASHIM S A.Effect of surface roughness on the strength of cleavage joints[J].International Journal of Adhesion and Adhesives,2002,22(3):235-244.
[27] RIDER A N,ARNOTT D R.Boiling water and silane pre-treatment of aluminium alloys for durable adhesive bonding[J].International Journal of Adhesion and Adhesives,2000,20(3):209-220.
[28] FENG L,ZHANG Y,XI J,et al.Petal effect:a superhydrophobic state with high adhesive force[J].Langmuir,2008,24(8):4114-4119.
[29] GRIGNARD B,VAILLANT A,DE CONINCK J,et al.Electrospinning of a functional perfluorinated block copolymer as a powerful route for imparting superhydrophobicity and corrosion resistance to aluminum substrates[J].Langmuir,2010,27(1):335-342.
[30] WU Y,LIN J,CARLSON B E,et al.Effect of laser ablation surface treatment on performance of adhesive-bonded aluminum alloys[J].Surface and Coatings Technology,2016,304:340-347.
[31] 熊其玉,董磊,焦云龙,等.应用激光蚀刻不同微织构表面的润湿性[J].物理学报,2015,64(20):0206101. XIONG Q Y,DONG L,JIAO Y L,et al.Wettability of surfaces with different surface microstructures textured by laser[J].Acta Physica Sinica,2015,64(20):0206101.
[32] Van den BRAND J,BLAJIEV O,BEENTJES P C J,et al.Interaction of anhydride and carboxylic acid compounds with aluminum oxide surfaces studied using infrared reflection absorption spectroscopy[J].Langmuir,2004,20(15):6308-6317.
[33] Van den BRAND J,Van GILS S,BEENTJES P C J,et al.Ageing of aluminum oxide surfaces and their subsequent reactivity towards bonding with organic functional groups[J].Applied Surface Science,2004,235(4):465-474.
[34] GOLRU S S,ATTAR M M,RAMEZANZADEH B.Effects of different surface cleaning procedures on the superficial morphology and the adhesive strength of epoxy coating on aluminium alloy 1050[J].Progress in Organic Coatings,2015,87:52-60.
[35] PROLONGO S G,URENA A.Effect of surface pre-treatment on the adhesive strength of epoxy-aluminium joints[J].International Journal of Adhesion and Adhesives,2009,29(1):23-31.
[36] 杨孚标,肖加余,曾竟成,等.铝合金磷酸阳极化及胶接性能分析[J].材料工程,2006,(2):7-11. YANG F B,XIAO J Y,ZENG J C,et al.The phosphoric acid anodizing of aluminum alloys for adhesive bonding[J].Journal of Materials Engineering,2006,(2):7-11.
[37] SPERANDIO C,BARDON J,LAACHACHI A,et al.Influence of plasma surface treatment on bond strength behaviour of an adhesively bonded aluminium-epoxy system[J].International Journal of Adhesion and Adhesives,2010,30(8):720-728.
[38] AHEARN J S,DAVIS G D.Improved durability of aluminum adhesive bonds with phosphonic acid inhibitors[J].The Journal of Adhesion,1989,28(2-3):75-102.
[39] KENDIG M,JEANJAQUET S,ADDISON R,et al.Role of hexavalent chromium in the inhibition of corrosion of aluminum alloys[J].Surface and Coatings Technology,2001,140(1):58-66.
[40] CRITCHLOW G W,YENDALL K A,BAHRANI D,et al.Strategies for the replacement of chromic acid anodising for the structural bonding of aluminium alloys[J].International Journal of Adhesion and Adhesives,2006,26(6):419-453.
[41] ZAIN N M,AHMAD S H,ALI E S.Effect of surface treatments on the durability of green polyurethane adhesive bonded aluminum alloy[J].International Journal of Adhesion and Adhesives,2014,55:43-55.
[42] 张颖怀,许立宁,路民旭.硅烷处理对有机涂层/金属胶接接头力学性能的影响[J].材料工程,2009,(5):30-33,37. ZHANG Y H,XU L N,LU M X.Influence of silane treatment on mechanical properties of organic coating/metal adhesive joint[J].Journal of Materials Engineering,2009,(5):30-33,37.
[43] LUNDER O,LAPIQUE F,JOHNSEN B,et al.Effect of pre-treatment on the durability of epoxy-bonded AA6060 aluminium joints[J].International Journal of Adhesion and Adhesives,2004,24(2):107-117.
[44] FRENZEL R,SCHIEFER T,JANSEN I,et al.Polyelectrolytes to promote adhesive bonds of laser-structured aluminium[J].International Journal of Adhesion and Adhesives,2015,61:35-45.
[45] BROCKMANN W,HENNEMANN O D,KOLLEK H,et al.Adhesion in bonded aluminium joints for aircraft construction[J].International Journal of Adhesion and Adhesives,1986,6(3):115-143.
[46] DATLA N V,PAPINI M,ULICNY J,et al.The effects of test temperature and humidity on the mixed-mode fatigue behavior of a toughened adhesive aluminum joint[J].Engineering Fracture Mechanics,2011,78(6):1125-1139.
[47] AMELI A,DATLA N V,AZARI S,et al.Prediction of environmental degradation of closed adhesive joints using data from open-faced specimens[J].Composite Structures,2012,94(2):779-786.
[48] UNDERHILL P R,DUQUESNAY D L.The role of corrosion/oxidation in the failure of aluminum adhesive joints under hot,wet conditions[J].International Journal of Adhesion and Adhesives,2006,26(1):88-93.
[49] GUDE M R,PROLONGO S G,URENA A.Hygrothermal ageing of adhesive joints with nanoreinforced adhesives and different surface treatments of carbon fibre/epoxy substrates[J].International Journal of Adhesion and Adhesives,2013,40:179-187.
[50] FONDEUR F,KOENIG J L.FT-IR microscopy studies of water ingress into aluminum-adhesive joints[J].The Journal of Adhesion,1993,43(4):263-271.
[51] LUNDER O,OLSEN B,NISANCIOGLU K.Pre-treatment of AA6060 aluminium alloy for adhesive bonding[J].International Journal of Adhesion and Adhesives,2002,22(2):143-150.
[52] ZHENG R,LIN J,WANG P C,et al.Effect of hot-humid exposure on static strength of adhesive-bonded aluminum alloys[J].Defence Technology,2015,11(3):220-228.
[53] HADAVINIA H,KINLOCH A J,LITTLE M S G,et al.The prediction of crack growth in bonded joints under cyclic-fatigue loading I.Experimental studies[J].International Journal of Adhesion and Adhesives,2003,23(6):449-461.
[54] ZHANG F,WANG H P,HICKS C,et al.Experimental study of initial strengths and hygrothermal degradation of adhesive joints between thin aluminum and steel substrates[J].International Journal of Adhesion and Adhesives,2013,43(3):14-25.
[55] JIANG M Y,WU L K,HU J M,et al.Silane-incorporated epoxy coatings on aluminum alloy (AA2024).Part 1:improved corrosion performance[J].Corrosion Science,2015,92:118-126.
[56] Del REAL J C,CANO de SANTAYANA M,ABENOJAR J,et al.Influence of silanisation parameters with γ-methacryloxypropyltrimethoxysilane on durability of aluminium/acrylic adhesive joints[J].Journal of Adhesion Science and Technology,2008,22(13):1461-1475.
[1] 范淑敏, 陈送义, 张星临, 周亮, 黄兰萍, 陈康华. 多级时效热处理对7056铝合金析出组织与耐蚀性的影响[J]. 材料工程, 2019, 47(6): 136-143.
[2] 王玉洁, 张鹏, 王选, 杜云慧, 王胜林, 张伟一, 鹿红梅. 氧气流量对LY12铝合金微弧氧化膜致密性的影响[J]. 材料工程, 2019, 47(5): 86-92.
[3] 李惠, 肖文龙, 张艺镡, 马朝利. 多重结构Ti-B4C/Al2024复合材料的组织和力学性能[J]. 材料工程, 2019, 47(4): 152-159.
[4] 李卫, 陈康华, 焦慧彬, 周亮, 杨振, 陈送义. 微量Ge对7056铝合金组织和淬火敏感性的影响[J]. 材料工程, 2019, 47(3): 123-130.
[5] 周航, 张峥. AlSi10Mg(Cu)铸铝合金的热疲劳裂纹萌生及早期扩展行为[J]. 材料工程, 2019, 47(3): 131-138.
[6] 陈跃良, 王安东, 卞贵学, 张勇. CF8611/AC531复合材料性能及与7B04铝合金电偶腐蚀的电化学研究[J]. 材料工程, 2019, 47(1): 97-105.
[7] 马慧媛, 刘慧丛, 石文静, 施丽铭, 李卫平, 朱立群. 应力载荷作用下5A06铝合金薄板材料在盐水中腐蚀行为[J]. 材料工程, 2018, 46(9): 152-159.
[8] 万闪, 姜丹, 蔡光义, 廖圣智, 董泽华. 铝合金超疏水转化膜的制备与性能[J]. 材料工程, 2018, 46(9): 144-151.
[9] 王匀, 陈英箭, 许桢英, 唐书浩. 基体表面粗糙度对热丝TIG堆焊Inconel625组织和耐腐蚀性能的影响[J]. 材料工程, 2018, 46(7): 94-99.
[10] 黄元春, 许天成, 肖政兵, 任贤魏, 贾广泽. 弥散相对3003铝合金再结晶晶粒尺寸的影响[J]. 材料工程, 2018, 46(6): 65-72.
[11] 徐勇, 靳鹏飞, 田亚强, 张士宏, 王礼良, 曾一畔. 铝合金局部热处理技术及其在板材成形中的应用发展现状[J]. 材料工程, 2018, 46(5): 44-55.
[12] 栗慧, 邹家生, 姚君山, 彭浩平. 2219高强铝合金活性TIG焊工艺[J]. 材料工程, 2018, 46(4): 66-73.
[13] 杜娟, 田辉, 陈亚军, 王付胜, 陈翘楚, 褚弘. 7A04铝合金应力腐蚀敏感性及裂纹萌生与扩展行为[J]. 材料工程, 2018, 46(4): 74-81.
[14] 杨守杰, 邢清源, 于海军, 王玉灵, 戴圣龙. 800MPa级Al-Zn-Mg-Cu系合金[J]. 材料工程, 2018, 46(4): 82-90.
[15] 何培龙, 程方杰, 肖兵, 赵欢. 添加Ge元素对CsF-AlF3钎剂熔化特性、物相结构及铺展性能的影响[J]. 材料工程, 2018, 46(4): 99-103.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn