Please wait a minute...
 
材料工程  2018, Vol. 46 Issue (4): 140-145    DOI: 10.11868/j.issn.1001-4381.2016.000749
  研究论文 本期目录 | 过刊浏览 | 高级检索 |
国产T700级碳纤维/双马来酰亚胺树脂复合材料界面性能
王迎芬1, 刘刚1, 彭公秋1, 李韶亮2, 谢富原1
1. 中航复合材料有限责任公司, 北京 101300;
2. 空军驻北京地区军事代表室, 北京 101300
Interfacial Properties of Domestic T700 Carbon Fiber/Bismaleimide Composites
WANG Ying-fen1, LIU Gang1, PENG Gong-qiu1, LI Shao-liang2, XIE Fu-yuan1
1. AVIC Composite Corporation Ltd., Beijing 101300, China;
2. Air Force Military Representative Office in Beijing Region, Beijing 101300, China
全文: PDF(1659 KB)   HTML()
输出: BibTeX | EndNote (RIS)      
摘要 分别以日本东丽T700S和国产T700级碳纤维作为增强体,采用热压罐成型工艺制备了双马来酰亚胺树脂基复合材料。对比研究了两种碳纤维表面物理、化学状态以及复合材料的微观界面性能、层间剪切性能。结果表明,国产T700级碳纤维表面沟槽结构分布较多,表面粗糙度较高,有利于与树脂基体形成更好的物理结合作用。虽然两种碳纤维的含氧官能团相当,但国产T700级碳纤维表面元素氧碳比较高,有利于与基体树脂形成更好的化学结合作用,其界面剪切强度较T700S碳纤维复合材料高约14%,复合材料的层间剪切强度高约19%。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
王迎芬
刘刚
彭公秋
李韶亮
谢富原
关键词 T700级碳纤维双马来酰亚胺树脂复合材料界面    
Abstract:Toray T700S and domestic T700 carbon fibers were used as reinforcements to prepare bismaleimide composites by autoclave moulding. Surface physical and chemical states of the carbon fibers, as well as interfacial of the composites and interlaminar shear strength were studied. The results show that the domestic T700 carbon fibers can form better physical adhesion with the resin matrix, which have more grooves on the surface and higher surface roughness than T700S carbon fibers. Although the two kinds of oxygen functional groups of carbon fiber are equivalent, the domestic T700 carbon fibers can form better chemical adhesion with the resin matrix, as they have more oxygenic functional groups than T700S carbon fibers. Hence, the interfacial shear strength of domestic T700 carbon fibers is higher than that of T700S carbon fibers by about 14%, and the interlaminar shear strength is higher by about 19%.
Key wordsT700 carbon fiber    bismaleimide    composites    interface
收稿日期: 2016-06-17      出版日期: 2018-04-14
中图分类号:  TB332  
通讯作者: 刘刚(1979-),男,研究员,博士,主要从事树脂基复合材料相关研究,联系地址:北京市顺义区时俊南街中航复材1号科研楼(101300),E-mail:liugang@iccas.ac.cn     E-mail: liugang@iccas.ac.cn
引用本文:   
王迎芬, 刘刚, 彭公秋, 李韶亮, 谢富原. 国产T700级碳纤维/双马来酰亚胺树脂复合材料界面性能[J]. 材料工程, 2018, 46(4): 140-145.
WANG Ying-fen, LIU Gang, PENG Gong-qiu, LI Shao-liang, XIE Fu-yuan. Interfacial Properties of Domestic T700 Carbon Fiber/Bismaleimide Composites. Journal of Materials Engineering, 2018, 46(4): 140-145.
链接本文:  
http://jme.biam.ac.cn/CN/10.11868/j.issn.1001-4381.2016.000749      或      http://jme.biam.ac.cn/CN/Y2018/V46/I4/140
[1] LIU L S, WU F, YAO H W, et al. Investigation of surface properties of pristine and γ-irradiated PAN-based carbon fibers:effects of fiber instinct structure and radiation medium[J]. Applied Surface Science, 2015, 337:241-248.
[2] CHEN J C,HARRISON I R. Modification of polyacrylonitrile (PAN) carbon fiber precursor via post-spinning plasticization and stretching in dimethyl formamide (DMF)[J]. Carbon, 2002, 40:25-45.
[3] REZAEI F, YUNUS R, IBRAHIM N A. Effect of fiber length on thermomechanical properties of short carbon fiber reinforced polypropylene composites[J]. Materials & Design, 2009, 30:260-263.
[4] KARNIK S R, GAITONDE V N, CAMPOS R J, et al. Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model[J]. Materials & Design, 2008, 29:1768-1776.
[5] 杜善义. 先进复合材料与航空航天[J]. 复合材料学报, 2007, 24(1):1-12. DU S Y. Advanced composite materials and aerospace engineering[J]. Acta Materiae Compositae Sinica, 2007, 24(1):1-12.
[6] BIRESAW G, CARRIERE C J. Correlation between mechanical adhesion and interfacial properties of starch/biodegradable polymer blends[J]. Polymer Science Part B:Polymer Physics, 2001, 39:920-930.
[7] 程俊梅, 于广水, 赵树高,等. 动态热力学分析法评估短纤维/橡胶复合材料界面粘合效果[J]. 橡胶工业, 2006, 53(3):139-142. CHENG J M, YU G S, ZHAO S G, et al. Evaluation of adhesive effect on short fiber/rubber interface by DTMA[J]. China Rubber Industry, 2006, 53(3):139-142.
[8] 隋刚,杨小平,梁吉,等. 碳纳米管/天然橡胶复合材料的制备及性能[J]. 复合材料学报, 2005, 22(5):72-77. SUI G, YANG X P, LIANG J, et al. Preparation and properties of carbon nanotubes/natural rubber composites[J]. Acta Materiae Compositae Sinica, 2005, 22(5):72-77.
[9] HUANG Y D, ZHANG Z Q, TONG Z, et al. Interfacial monitoring during the processing of carbon fiber/PMR15 polyimide composites[J]. Journal of Materials Process Technology, 1993, 37:559-570.
[10] LIN T K, WU S J, LAI J G, et al. The effect of chemical treatment on reinforcement/matrix interaction in Kevlar-fiber/bismaleimide composites[J]. Composites Science and Technology, 2000, 60:1873-1878.
[11] 彭公秋, 杨进军, 曹正华,等. T700S/QY8911双马树脂复合材料的界面匹配性能[J]. 航空材料学报, 2011, 31(2):43-47. PENG G Q, YANG J J, CAO Z H, et al. Study on interface compatibility of T700S/QY8911 composite[J]. Journal of Aeronautical Materials, 2011, 31(2):43-47.
[12] 张代军, 刘刚, 包建文,等. T700碳纤维增强环氧树脂基复合材料自然老化性能与机制[J]. 复合材料学报, 2016, 33(7):1390-1399. ZHANG D J, LIU G, BAO J W, et al. Environmental aging performance and mechanism of T700 carbon fiber reinforced epoxy resin matrix composites[J]. Acta Materiae Compositae Sinica, 2016, 33(7):1390-1399.
[13] 周春华, 刘威, 张志谦,等. CF/PMR-15复合材料界面的湿热稳定性研究[J]. 复合材料学报, 1997, 14(4):133-138. ZHOU C H, LIU W, ZHANG Z Q, et al. Study of moisture stability of CF/PMR-15 matrix interface[J]. Acta Materiae Compositae Sinica, 1997, 14(4):133-138.
[14] 罗云烽, 李阳, 肈研,等. 国产T800级炭纤维表面特性及其复合材料微观界面性能[J]. 材料工程, 2014(9):83-88. LUO Y F, LI Y, ZHAO Y, et al. Surface characteristics of domestic T800-grade carbon fiber and microscopic interphase properties of composites[J]. Journal of Materials Engineering, 2014(9):83-88.
[15] YAO L R, LI M, WU Q, et al. Composite of sizing effect of T700 grade carbon fiber on interfacial properties of fiber/BMI and fiber/epoxy[J]. Applied Surface Science, 2012, 263:326-333.
[16] LUO Y F, ZHAO Y, DUAN Y X, et al. Surface and wettability property analysis of CCF300 carbon fibers with different sizing or without sizing[J]. Materials & Design, 2011, 32(2):941-946.
[17] LUO H Y, ROY S, LU H B. Dynamic compressive behavior of u-nidirectional IM7-5250-4 laminate after thermal oxidation[J]. Composite Science and Technology, 2012, 72:159-166.
[18] ZHANG R L, HUANG Y D, SU D, et al. Influence of sizing molecular weight on the properties of carbon fibers and its composites[J]. Materials & Design, 2012, 34:649-654.
[19] NURSEL D, WIGHTMAN J P. Surface analysis of desized and sized carbon fibers[J]. Carbon, 1999, 37(7):1105-1114.
[20] KIM T H, VIJAYALAKSHMI S, SON S J, et al. A combined study of preparation and characterization of carbon molecular sieves for carbon adsorption from coals of different origin[J]. Journal of Industrial and Engineering Chemistry, 2003, 9:481-487.
[21] 王迎芬, 彭公秋, 谢富原,等. 国产T700级碳纤维表面特性对BMI复合材料湿热性能的影响[J]. 航空制造技术, 2014(3):90-94. WANG Y F, PENG G Q, XIE F Y, et al. Effect of surface properties of domestic T700 grade carbon fiber on hygrothermal performance of BMI composites[J]. Aeronautical Manufacturing Technology, 2014(3):90-94.
[1] 郝思嘉, 李哲灵, 任志东, 田俊鹏, 时双强, 邢悦, 杨程. 拉曼光谱在石墨烯聚合物纳米复合材料中的应用[J]. 材料工程, 2020, 48(7): 45-60.
[2] 刘雪峰, 白于良, 李晶琨, 秦回一, 陈鑫. 冷轧成形钛/钢层状复合板界面结合强度的影响因素[J]. 材料工程, 2020, 48(7): 119-126.
[3] 张波波, 张文娟, 杜雪岩, 王有良. 铁基磁性纳米材料吸附废水中重金属离子研究进展[J]. 材料工程, 2020, 48(7): 93-102.
[4] 冯景鹏, 余欢, 徐志锋, 蔡长春, 王振军, 胡银生, 王雅娜. 2.5D浅交直联Cf/Al复合材料的显微组织及弯曲和剪切性能[J]. 材料工程, 2020, 48(6): 132-139.
[5] 齐新, 王晨, 南文争, 洪起虎, 彭思侃, 燕绍九. 人造固态电解质界面在锂金属负极保护中的应用研究[J]. 材料工程, 2020, 48(6): 50-61.
[6] 张小广, 邓慧宇, 陈庆春, 邦宇, 晏乐安, 那兵. 5-异氰酸酯异肽酰氯/ZnO/超支化聚酰胺纳滤膜的制备及性能[J]. 材料工程, 2020, 48(5): 91-99.
[7] 易振华, 冉丽萍, 易茂中. Ni-Cr-P焊膏钎焊C/C复合材料的组织和性能[J]. 材料工程, 2020, 48(5): 127-135.
[8] 张从阳, 李志锐, 方东, 叶永盛, 叶喜葱, 吴海华. SiCp/AZ91D镁基纳米复合材料的室温拉伸行为及塑性变形机理[J]. 材料工程, 2020, 48(4): 108-115.
[9] 张芳芳, 段永川, 高安娜, 姚丹. 基于耦合法的二维三轴编织复合材料热学性能预测及验证[J]. 材料工程, 2020, 48(4): 151-157.
[10] 陈振, 张增志, 丛中卉, 王立宁, 吴浩平. 开孔型聚合物发泡材料的研究及应用进展[J]. 材料工程, 2020, 48(3): 1-9.
[11] 刘继涛, 钏定泽, 杨泽斌, 陈希亮, 颜廷亭, 陈庆华. 氨基酸/羟基磷灰石复合材料的制备与表征及其在酸蚀牛牙釉质体外再矿化中的应用[J]. 材料工程, 2020, 48(2): 100-107.
[12] 齐业雄, 姜亚明, 李嘉禄. 混杂比对碳/芳纶纤维混杂纬编双轴向多层衬纱织物增强复合材料力学性能的影响[J]. 材料工程, 2020, 48(2): 71-78.
[13] 戚云超, 方国东, 梁军, 谢军波. 三维针刺C/C-SiC复合材料预制体工艺参数优化[J]. 材料工程, 2020, 48(1): 27-33.
[14] 张冰清, 杨小波, 孙志强, 苗镇江, 王华栋, 吕毅. 纤维增强石英复合材料的改性处理及性能研究[J]. 材料工程, 2020, 48(1): 48-53.
[15] 徐鹏, 王冠韬, 刘奎, 罗斯达. 石墨烯/碳纳米管嵌入式纤维传感器对树脂基复合材料原位监测的结构-性能关系对比[J]. 材料工程, 2019, 47(9): 29-37.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn