Please wait a minute...
 
材料工程  2017, Vol. 45 Issue (12): 50-57    DOI: 10.11868/j.issn.1001-4381.2016.000981
  研究论文 本期目录 | 过刊浏览 | 高级检索 |
热氧老化对碳纤维双马树脂基复合材料性能的影响
马少华1, 费昺强1, 许良1, 回丽1,2
1. 沈阳航空航天大学 机电工程学院, 沈阳 110136;
2. 沈阳航空航天大学 航空制造工艺数字化国防重点学科实验室, 沈阳 110136
Influence of Thermal-oxidative Aging on Property of Carbon Fiber Bismaleimide Resin Composites
MA Shao-hua1, FEI Bing-qiang1, XU Liang1, HUI Li1,2
1. School of Mechatronics Engineering, Shenyang Aerospace University, Shenyang 110136, China;
2. Key Laboratory of Fundamental Science for National Defense of Aeronautical Digital Manufacturing Process, Shenyang Aerospace University, Shenyang 110136, China
全文: PDF(7098 KB)   HTML()
输出: BibTeX | EndNote (RIS)      
摘要 采用三点弯曲测试方法,研究热氧老化对碳纤维双马树脂基复合材料弯曲性能的影响,分析复合材料的失重行为以及不同老化时间下的弯曲性能、断口形貌、动态力学性能和红外谱图。结果表明:随着老化时间的增加,老化温度为100℃时的质量损失率逐渐趋于平稳,180℃时的质量损失率逐渐增加。老化温度为100℃时,只是物理老化,没有新物质的生成;而老化温度为180℃时,发生了化学老化,产生了热老化效应和氧化反应,引起了基体性能和界面性能的退化。热氧老化对复合材料弯曲强度的影响要大于对弯曲模量的影响。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
马少华
费昺强
许良
回丽
关键词 碳纤维双马树脂基复合材料热氧老化弯曲性能物理老化化学老化    
Abstract:The influence of thermal-oxidative aging on flexural property of carbon fiber bismaleimide resin composites was investigated via three point flexural test. The mass loss behavior, fracture morphology, dynamic mechanical property and IR spectrum of the composites were analyzed at different aging time. The results show that with the increase of aging time, the mass loss rate at 100℃ aging temperature gradually tends to stabilize and the mass loss rate at 180℃ aging temperature gradually increases. There is only physical aging at 100℃ aging temperature and no new substance is generated; but at the aging temperature 180℃, the chemical aging occurs and results in thermal aging and oxidation reactions, causing the degradation of matrix and interface properties. The influence of thermal-oxidative aging on flexural strength of composites is greater than flexural modulus.
Key wordscarbon fiber bismaleimide resin composite    thermal-oxidative aging    flexural property    physical aging    chemical aging
收稿日期: 2016-08-18      出版日期: 2017-12-19
中图分类号:  TB332  
通讯作者: 许良(1965-),男,副教授,主要从事复合材料和金属材料性能研究,联系地址:辽宁省沈阳市道义南大街37号沈阳航空航天大学机电工程学院(110136),E-mail:sysyxu@163.com     E-mail: sysyxu@163.com
引用本文:   
马少华, 费昺强, 许良, 回丽. 热氧老化对碳纤维双马树脂基复合材料性能的影响[J]. 材料工程, 2017, 45(12): 50-57.
MA Shao-hua, FEI Bing-qiang, XU Liang, HUI Li. Influence of Thermal-oxidative Aging on Property of Carbon Fiber Bismaleimide Resin Composites. Journal of Materials Engineering, 2017, 45(12): 50-57.
链接本文:  
http://jme.biam.ac.cn/CN/10.11868/j.issn.1001-4381.2016.000981      或      http://jme.biam.ac.cn/CN/Y2017/V45/I12/50
[1] 张晓云,曹东,陆峰,等.T700/5224复合材料在湿热环境和化学介质中的老化行为[J]. 材料工程,2016,44(4):82-88. ZHANG X Y, CAO D, LU F, et al. Aging behavior of T700/5224 composite in hygrothermal environment and chemical media[J]. Journal of Materials Engineering, 2016, 44(4):82-88.
[2] 高禹,王钊,陆春,等.高性能树脂基复合材料典型空天环境下动态力学行为研究现状[J].材料工程,2015, 43(3):106-112. GAO Y, WANG Z, LU C, et al. State of arts of the dynamic mechanical behaviors of high performance polymer composites in typical aerospace environments[J]. Journal of Materials Engineering, 2015, 43(3):106-112.
[3] 李斌太,邢丽英,包建文,等.先进复合材料国防科技重点实验室的航空树脂基复合材料研发进展[J]. 航空材料学报,2016,36(3):92-100. LI B T, XING L Y, BAO J W, et al. Research and development progress of national key laboratory of advanced composites on advanced aeronautical resin matrix composites[J].Journal of Aeronautical Materials, 2016, 36(3):92-100.
[4] 张艳萍,熊金平,左禹. 碳纤维及其复合材料/环氧树脂复合材料的热氧老化机理[J]. 北京化工大学学报,2007, 34(5):523-527. ZHANG Y P, XIONG J P, ZUO Y. Thermo-oxidative aging mechanisms of carbon fiber/epoxy resin compound materials[J].Journal of Beijing University of Chemical Technology, 2007, 34(5):523-527.
[5] 何纯磊,于运花,李晓超,等.碳纤维/环氧树脂复合材料加速热氧老化研究[J].玻璃钢/复合材料,2012,(2):25-29. HE C L, YU Y H, LI X C, et al. Accelerated thermo-oxidative aging on carbon fiber/epoxy composite[J].Fiber Reinforced Plastics/Composites, 2012,(2):25-29.
[6] DINH Q V, MARCO G, LAFARIE M C. Experimental characterization of thermo-oxidation-induced shrinkage and damage in polymer-matrix composites[J]. Composites Part A, 2012, 43(4):577-586.
[7] AKAY M, SPRATT G.Evaluation of thermal ageing of a carbon fiber reinforced bismalemide[J].Composites Science and Technology, 2008, 68(15):3081-3086.
[8] 毛春见,许希武,郑达.缝合复合材料层板低速冲击及冲击后压缩实验研究[J].复合材料学报,2012,29(2):160-166. MAO C J, XU X W, ZHENG D. Experimental investigation of stitched laminates subjected to low-velocity impact and compression after impact[J]. Acta Materiae Compositae Sinica, 2012,29(2):160-166.
[9] 王钊.典型空天环境作用下T700/6421复合材料老化效应研究[D].沈阳:沈阳航空航天大学,2014. WANG Z. Study on aging effects of typical space environments on T700/6421 composite[D].Shenyang:Shenyang Aerospace University, 2014.
[10] 樊威,李嘉禄.炭纤维增强聚合物基复合材料的热氧老化机理[J].固体火箭技术,2015,38(1):116-122. FAN W, LI J L. Thermo-oxidative aging mechanism of carbon fiber reinforced polymer matrix composites[J].Journal of Solid Rocket Technology, 2015,38(1):116-122.
[11] 益小苏,杜善义,张立同.复合材料手册[M].北京:化学工业出版社,2009. YI X S, DU S Y, ZHANG L T. Composite materials handbook[M]. Beijing:Chemical Industry Press, 2009.
[12] 李嘉禄,孙颖,李学明.二步法方型三维编织复合材料力学性能及影响因素[J].复合材料学报,2004,21(1):90-94. LI J L, SUN Y, LI X M. Research on the mechanical properties and the effectors of the two-step 3D braided composites[J]. Acta Materiae Compositae Sinica, 2004, 21(1):90-94.
[13] 包建文,陈祥宝. 5284/T300复合材料湿热性能研究[J].宇航材料工艺,2000,30(4):37-40. BAO J W, CHEN X B. Study on hygrothermal properties of 5284/T300 composites[J].Aerospace Materials & Technology, 2000, 30(4):37-40.
[14] 樊威,李嘉禄.热氧老化对碳纤维织物增强聚合物基复合材料弯曲性能的影响[J].复合材料学报,2015, 32(5):1260-1270. FAN W, LI J L. Effects of thermo-oxidative aging on flexural properties of carbon fiber fabric reinforced polymer matrix composites[J]. Acta Materiae Compositae Sinica, 2015, 32(5):1260-1270.
[15] 过梅丽,肇研,许凤和. 先进聚合物基复合材料的老化研究-I.热氧老化[J]. 航空学报,2000, 21(4):62-65. GUO M L, ZHAO Y, XU F H. Study of aging of advanced polymer matrix composites-thermooxidizing aging[J]. Acta Aeronautica et Astronautica Sinica, 2000, 21(4):62-65.
[16] OHNO S, LEE M H, LIN K Y, et al. Thermal degradation of IM7/BMI5260 composite materials:characterization by X-ray photoelectron spectroscopy[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing, 2000, 293(1):88-94.
[17] ROGER J M. Aging of polymer matrix fibrous composites[C]//International encyclopedia of composites.New York:VCH Publishers Inc,1990.
[18] 高禹,王绍权,孙运刚,等.真空热循环对单向T700/6421复合材料动态力学性能的影响[C]//第十八届全国复合材料学术会议.北京:电子工业出版社,2014. GAO Y, WANG S Q, SUN Y G, et al. Influences of vacuum thermal cycling on the dynamic mechanical properties of a unidirectional T700/6421 composite[C]//The 18th National Conference on Composite Materials.Beijing:Publishing House of Electronics Industry, 2014.
[19] LV X Y, WANG R G, LIU W B, et al. Surface and interface properties of carbon fiber composites under cyclical aging[J].Applied Surface Science, 2011, 257:10459-10464.
[20] 吕新颖,江龙,张彦华. 双马来酰亚胺树脂及其复合材料抗热氧老化性能[J].材料热处理学报, 2013, 34(11):21-26. LV X Y, JIANG L, ZHANG Y H. Thermal-oxidative aging properties of bismaleimide and composites[J].Transactions of Materials and Heat Treatment, 2013, 34(11):21-26.
[1] 宋海硕, 周登凤, 张道海, 郭建兵. 短玻纤增强尼龙10T复合材料的热氧老化性能[J]. 材料工程, 2017, 45(12): 43-49.
[2] 马少华, 王勇刚, 回丽, 许良. 湿热环境对碳纤维环氧树脂复合材料弯曲性能的影响[J]. 材料工程, 2016, 44(2): 81-87.
[3] 李翠玉, 罗岳文, 贾静艳, 冯亚男, 杨雪. 不同结构UHMWPE纤维纬编针织复合材料弯曲性能[J]. 材料工程, 2015, 43(11): 84-90.
[4] 王玲玲, 马文闵, 嵇阿琳, 崔红, 闫联生, 黄剑. C/C多孔体对C/C-SiC复合材料制备及性能的影响[J]. 材料工程, 2014, 0(7): 34-38.
[5] 贺成红, 张佐光, 李玉彬, 孙志杰. S-2/F46复合材料低速冲击损伤及剩余弯曲性能[J]. 材料工程, 2008, 0(6): 29-32.
[6] 卢锦花, 李贺军, 刘皓, 胡志彪, 陈强. 碳纤维表面处理对2D碳/碳复合材料弯曲性能的影响[J]. 材料工程, 2005, 0(9): 3-6.
[7] 周少荣, 乔生儒. C/C复合材料高温弯曲力学性能研究[J]. 材料工程, 2001, 0(6): 16-17,29.
[8] 李晓骏, 许凤和, 陈新文. 先进聚合物基复合材料的热氧老化研究[J]. 材料工程, 1999, 0(12): 19-22,30.
[9] 周少荣, 乔生儒, 白世鸿, 孙晓燕. 单向C/C复合材料的界面层对其力学性能的影响[J]. 材料工程, 1997, 0(6): 15-16,33.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn