Please wait a minute...
 
材料工程  2016, Vol. 44 Issue (6): 63-69    DOI: 10.11868/j.issn.1001-4381.2016.06.010
  材料与工艺 本期目录 | 过刊浏览 | 高级检索 |
CMSs/PET微胶囊阻燃PET纤维制备与表征
牛梅1,2, 杨雅茹2, 王欣2, 薛宝霞2, 张莹2, 李京京2, 戴晋明1,2
1. 太原理工大学 新材料界面科学与工程教育部重点实验室, 太原 030024;
2. 太原理工大学 轻纺工程学院, 山西 晋中 030600
Preparation and Characterization of Flame Retardant PET Fiber with Microencapsulated CMSs/PET
NIU Mei1,2, YANG Ya-ru2, WANG Xin2, XUE Bao-xia2, ZHANG Ying2, LI Jing-jing2, DAI Jin-ming1,2
1. Key Laboratory of Interface Science and Engineering in Advanced Materials(Ministry of Education), Taiyuan University of Technology, Taiyuan 030024, China;
2. College of Textile Engineering, Taiyuan University of Technology, Jinzhong 030600, Shanxi, China
全文: PDF(9865 KB)   HTML()
输出: BibTeX | EndNote (RIS)      
摘要 将采用原位聚合法自制的核-壳型碳微球(CMSs)/聚对苯二甲酸乙二醇酯(PET)微胶囊(PCMSs)作为阻燃剂,采用熔融纺丝法制备阻燃PCMSs/PET功能纤维。通过扫描电镜、声速仪、强伸仪、极限氧指数仪等测试设备对添加不同质量分数的阻燃剂的阻燃功能纤维的结构及性能进行测试和表征。结果表明:当阻燃剂PCMSs的质量分数为0.6%时,PCMSs在PET纤维基体中的分散性和相容性良好,此时纤维表面较为光滑,同时具有优良的吸湿性能和阻燃性能,但其力学性能稍低于PCMSs质量分数为0.2%时的PCMSs/PET纤维。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
牛梅
杨雅茹
王欣
薛宝霞
张莹
李京京
戴晋明
关键词 CMSsCMSs/PET微胶囊PET阻燃功能纤维    
Abstract:The core-shell carbon microspheres(CMSs)/polyethylene terephthalate(PET) capsule (PCMSs) by in situ polymerization was selected as flame retardant. The flame-retardant PCMSs/PET functional fiber was prepared by melt spinning method. The structure and properties of PET fiber with different mass fractions of flame retardant were characterized by SEM, sound velocimeter, tensile tester and limit oxygen index apparatus. The results show that PCMSs has a good compatibility and dispersion within PET matrix, and the excellent moisture absorption and flame retardant properties of functional PET fiber with smooth surface is obtained when the mass fraction of PCMSs is 0.6%, but the mechanical property of PCMSs/PET fiber with 0.6% PCMSs is a little lower than the PCMSs/PET fiber with 0.2% PCMSs.
Key wordsCMSs    CMSs/PET capsule    PET    flame retardant    functional fiber
收稿日期: 2015-04-20      出版日期: 2016-06-13
中图分类号:  TB32  
通讯作者: 牛梅(1979-),女,副教授,博士,研究方向为阻燃复合材料,联系地址:山西省晋中市榆次区太原理工大学(明向校区)轻纺工程学院(030600),E-mail:niumeityut@163.com     E-mail: niumeityut@163.com
引用本文:   
牛梅, 杨雅茹, 王欣, 薛宝霞, 张莹, 李京京, 戴晋明. CMSs/PET微胶囊阻燃PET纤维制备与表征[J]. 材料工程, 2016, 44(6): 63-69.
NIU Mei, YANG Ya-ru, WANG Xin, XUE Bao-xia, ZHANG Ying, LI Jing-jing, DAI Jin-ming. Preparation and Characterization of Flame Retardant PET Fiber with Microencapsulated CMSs/PET. Journal of Materials Engineering, 2016, 44(6): 63-69.
链接本文:  
http://jme.biam.ac.cn/CN/10.11868/j.issn.1001-4381.2016.06.010      或      http://jme.biam.ac.cn/CN/Y2016/V44/I6/63
[1] 李人杰. 环境友好PET阻燃技术的研究进展[J]. 材料导报,2014,28(1):115-118. LI R J. Research progress of environmentally friendly PET flame retardant technology[J]. Materials Review,2014,28(1):115-118.
[2] WEIL E D, LEVCHIK S V. Flame retardants in commercial use or development for textils[J]. Journal of Fire Sciences,2008,26(3):243-281.
[3] CHANG S Q, XIE T X, YANG G S. Effects of interfacial modification on the thermal, mechanical, and fire properties of high-impact polystyrene/microencapsulated red phosphorous[J]. Journal of Applied Polymer Science,2008,110(4):2139-2144.
[4] CHEN L, BIAN X C, YANG R,et al. PET in situ composites improved both flame retardancy and mechanical properties by phosphorus-containing thermotropic liquid crystalline copolyester with aromatic ether moiety[J].Compos Sci Techn,2012,72(6):649-655.
[5] 薛宝霞,牛梅,张莹,等. 不同纳米碳材料阻燃聚对苯二甲酸乙二醇酯复合材料性能的表征[J]. 高分子材料科学与工程,2015,31(3):60-70. XUE B X, NIU M, ZHANG Y, et al. Characterization of the properties of flame retardant polyethylene terephthalate composite with different nano carbon materials[J]. Polymer Materials Science and Engineering,2015,31(3):60-70.
[6] LIU X G, YANG Y Z, LIN X, et al. Deoiled asphalt as carbon source for preparation of various varbon materials by chemical vapor deposition[J]. Fuel Processing Technology,2006,87(10):919-925.
[7] SHYR T W, LO C M,YE S R. Sequence distribution and crystal structure of poly (ethylene/trimethylene terephthalate) copolyesters[J]. Polymer,2005,46(14):5284-5298.
[8] 李静雅. 阻燃CMSs/PET及CMSs-PAn/PET功能材料的制备及其结构性能研究[D]. 太原:太原理工大学,2013.
[9] 井敏,谭婷婷,王成国,等. PAN基碳纤维的微观结构与力学性能相关性分析[J]. 航空材料学报,2013,33(1):78-83. JING M, TAN T T, WANG C G, et al. Correlation analysis of microstructure and mechanical properties of carbon fiber based PAN[J]. Journal of Aeronautical Materials,2013,33(1):78-83.
[10] LECOMTE H A, LIGGAT J J. Commercial fire-retarded PET formulations:Relationship between thermal degradation behaviour and fire-retardant action[J]. Polyme Degrad Stab,2008,93:498-501.
[11] 刘培培,朱志国,陈放,等. 原位聚合法制备碳纳米管/PET复合物及其性能研究[J]. 材料导报,2010,24(16):108-109. LIU P P, ZHU Z G, CHEN F, et al. Situ polymerization of carbon nanotubes/PET composite and its research[J]. Materials Review,2010,24(16):108-109.
[12] WANG D Y, GE X G, WANG Y Z, et al. A novel phosphorus-containing poly (ethylene terephthalate)nanocomposite with both flame retardancy and antidripping effects[J]. Macromolecular Materials Engineering,2006,291(6):638-645.
[13] ZHANG S, HORROCKS A R. A review of flame retardant polypropylene fibres[J]. Progress in Polymer Science,2003,(28):1517-1538.
[14] 臧充光,陈华华,胡洋成. RDP与APP/MC/PPO复配膨胀阻燃聚乙烯的研究[J]. 材料工程,2014,(12):44-49. ZANG C G, CHEN H H, HU Y C. RDP and APP/MC/PPO compound intumescent flame retardant of polyethylene[J]. Journal of Materials Engineering,2014,(12):44-49.
[15] 卢林刚, 陈英辉, 程哲,等. 新型无卤膨胀/MH阻燃环氧树脂的制备及阻燃性能[J]. 材料工程,2015,43(5):50-55. LU L G, CHEN Y H, CHENG Z, et al. Preparation and flame retardancy of intumescent/MH flame-retardant epoxy resins[J]. Journal of Materials Engineering,2015,43(5):50-55.
[16] 陈阁谷, 关莹, 亓宪明,等. 聚合物/层状硅酸盐纳米复合材料阻燃性研究进展[J]. 材料工程,2015,43(8):104-112. CHEN G G, GUAN Y, QI X M, et al. Recent progress on flame retardance of polymer/layered silicate nanocomposites[J]. Journal of Materials Engineering,2015,43(8):104-112.
[17] 王小英, 刘博, 汤玉峰, 等. 累托石/聚合物纳米复合材料的新进展[J].无机材料学报,2012,27(2):113-121. WANG X Y, LIU B, TANG Y F, et al. The new progress of rectorite/polymer nanocomposites[J]. Journal of Inorganic Materials,2012,27(2):113-121.
[1] 刘喜山, 曹博, 纪文斐, 孙军, 张胜. 二维层状无机物/硼酸锌复合体系对聚苯乙烯泡沫阻燃性能的影响[J]. 材料工程, 2019, 47(6): 101-107.
[2] 徐建林, 刘晓琦, 杨文龙, 牛磊, 赵金强. Nano-Sb2O3/BEO/PP复合材料阻燃性能[J]. 材料工程, 2019, 47(1): 84-90.
[3] 吴笑, 许博, 朱向东, 辛菲, 钱立军, 刘吉平. 催化阻燃聚合物的研究进展[J]. 材料工程, 2018, 46(9): 14-22.
[4] 黄伟江, 何文涛, 龙丽娟, 杨二钘, 秦舒浩, 于杰. 新型含磷高温尼龙的阻燃和力学性能[J]. 材料工程, 2018, 46(7): 68-75.
[5] 李雅泊, 曹宁宁, 郑玉婴, 郑文庆. 表面改性芳纶纤维/R-PET复合材料的制备及性能[J]. 材料工程, 2018, 46(6): 113-119.
[6] 毕波, 王学宝. 纳米碳材料在聚合物阻燃中的应用研究进展[J]. 材料工程, 2017, 45(5): 135-144.
[7] 张琪, 刘娟, 桑晓明, 闫莉. 高岭土/聚磷酸铵阻燃硬质聚氨酯-酰亚胺泡沫塑料的制备与性能[J]. 材料工程, 2017, 45(11): 23-29.
[8] 蔡建明, 弭光宝, 高帆, 黄浩, 曹京霞, 黄旭, 曹春晓. 航空发动机用先进高温钛合金材料技术研究与发展[J]. 材料工程, 2016, 44(8): 1-10.
[9] 徐建林, 周生刚, 牛磊, 杨文龙, 王程程, 文琛. 不同表面活性剂处理的Sb2O3对PVC复合材料阻燃性能的影响[J]. 材料工程, 2016, 44(8): 64-69.
[10] 弭光宝, 曹春晓, 黄旭, 曹京霞, 王宝, 隋楠. Ti-V-Cr系阻燃钛合金的非等温氧化行为及阻燃性能预测[J]. 材料工程, 2016, 44(1): 1-10.
[11] 陈阁谷, 关莹, 亓宪明, 彭锋, 姚春丽, 孙润仓. 聚合物/层状硅酸盐纳米复合材料阻燃性研究进展[J]. 材料工程, 2015, 43(8): 104-112.
[12] 卢林刚, 陈英辉, 程哲, 杨守生, 邵高耸. 新型无卤膨胀/MH阻燃环氧树脂的制备及阻燃性能[J]. 材料工程, 2015, 43(5): 50-55.
[13] 杨坤, 胡志强, 徐书林, 王海权, 于洋, 刘贵山, 姜妍彦, 张海涛. PET衬底上ITO薄膜的制备及光电性能[J]. 材料工程, 2014, 0(3): 71-76.
[14] 臧充光, 陈华华, 胡洋成. RDP与APP/MC/PPO复配膨胀阻燃聚乙烯的研究[J]. 材料工程, 2014, 0(12): 44-49.
[15] 赵红霞, 黄旭, 王宝, 雷力明. 热处理对Ti-35V-15Cr-0.15Si-0.05C合金热稳定性能的影响[J]. 材料工程, 2013, 0(7): 73-77.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn