Please wait a minute...
 
材料工程  2018, Vol. 46 Issue (11): 134-140    DOI: 10.11868/j.issn.1001-4381.2017.000127
  研究论文 本期目录 | 过刊浏览 | 高级检索 |
孪晶诱发的AZ31镁合金静态再结晶行为
石晶晶, 叶朋, 崔凯旋, 汪炳叔, 邓丽萍, 王晨, 李强
福州大学 材料科学与工程学院, 福州 350108
Static Recrystallization Induced by Twinning in AZ31 Magnesium Alloy
SHI Jing-jing, YE Peng, CUI Kai-xuan, WANG Bing-shu, DENG Li-ping, WANG Chen, LI Qiang
College of Materials Science and Engineering, Fuzhou University, Fuzhou 350108, China
全文: PDF(8623 KB)   HTML()
输出: BibTeX | EndNote (RIS)       背景资料
文章导读  
摘要 利用电子背散射衍射(EBSD)技术研究了AZ31镁合金单轴压缩变形后产生不同类型的孪晶组织对静态再结晶的晶粒形核及取向变化的影响,样品在室温下进行应变为16%的单轴压缩变形,然后在250℃分别保温3,20min和60min进行退火实验。结果表明:样品在退火3min后只有局部发生再结晶,且再结晶小晶粒优先在{1011}-{1012}二次孪晶内部形核,而{1012}拉伸孪晶不利于再结晶晶粒的形核;退火20min后完成再结晶过程。由孪晶诱发的新形核的再结晶晶粒与基体的取向差在38°两侧随机分布,可明显细化原始晶粒,并弱化变形后的取向。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
石晶晶
叶朋
崔凯旋
汪炳叔
邓丽萍
王晨
李强
关键词 镁合金孪晶静态再结晶EBSD取向    
Abstract:The effect of twin types in compressed samples on nucleation of grains and texture evolution during static recrystallization was investigated by using electron backscattered diffraction analysis (EBSD). The cylindrical samples were compressed with a strain of 16% at room temperature, followed by annealing after holding at 250℃ for 3min, 20min and 60min, respectively. The results show that only a few recrystallization grains can be found in local regions and first nucleated within the twins after annealing for 3min. Recrystallization process can be completed after annealing for 60min. Further research shows that the {1011}-{1012} double twins are the preferred sites for new grains nucleation, while the {1012} tensile twins are unfavorable for the nucleation of static recrystallization. The misorientation angle distribution between new grains and matrix is around 38° randomly. The grain size can be refined effectively by static recrystallization, and the deformation texture is weakened during annealing.
Key wordsmagnesium alloy    twin    static recrystallization    EBSD    orientation
收稿日期: 2017-02-08      出版日期: 2018-11-19
中图分类号:  TG146.2  
基金资助: 
通讯作者: 汪炳叔(1982-),男,副教授,博士,主要从事镁合金塑性变形机理研究,联系地址:福建省福州市闽侯上街福州大学材料科学与工程学院(350108),E-mail:bswang@fzu.edu.cn     E-mail: bswang@fzu.edu.cn
引用本文:   
石晶晶, 叶朋, 崔凯旋, 汪炳叔, 邓丽萍, 王晨, 李强. 孪晶诱发的AZ31镁合金静态再结晶行为[J]. 材料工程, 2018, 46(11): 134-140.
SHI Jing-jing, YE Peng, CUI Kai-xuan, WANG Bing-shu, DENG Li-ping, WANG Chen, LI Qiang. Static Recrystallization Induced by Twinning in AZ31 Magnesium Alloy. Journal of Materials Engineering, 2018, 46(11): 134-140.
链接本文:  
http://jme.biam.ac.cn/CN/10.11868/j.issn.1001-4381.2017.000127      或      http://jme.biam.ac.cn/CN/Y2018/V46/I11/134
[1] AGNEW S R, DUYGULU Z. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B[J]. International Journal of Plasticity, 2005, 21(6):1161-1193.
[2] 王斌,易丹青,方西亚,等. ZK60镁合金高温动态再结晶行为的研究[J]. 材料工程, 2009(11):45-50. WANG B, YI D Q, FANG X Y, et al. Study on high temperature dynamic recrystallization behavior of ZK60 magnesium alloy[J]. Journal of Materials Engineering, 2009(11):45-50.
[3] 李萧,杨平,孟利,等. AZ31镁合金中拉伸孪晶静态再结晶的分析[J]. 金属学报, 2010, 46(2):147-154. LI X, YANG P, MENG L, et al. Analysis of the static recrystallization at tension twins in AZ31 magnesium alloy[J]. Acta Metallurgica Sinica, 2010, 46(2):147-154.
[4] LI X, YANG P, WANG L N, et al. Orientational analysis of static recrystallization at compression twins in a magnesium alloy AZ31[J]. Materials Science and Engineering:A, 2009, 517(1/2):160-169.
[5] MACKENZIE L W F, PEKGULERYUZ M O. The recrystallization and texture of magnesium-zinc-cerium alloys[J]. Scripta Materialia, 2008, 59(6):665-668.
[6] YANG X Y, MIURA H, SAKAI T. Recrystallization behavior of fine-grained magnesium alloy after hot deformation[J]. Transactions of Nonferrous Metals Society of China, 2007, 17(6):1139-1142.
[7] SITDIKOV O, KAIBYSHEV R, SAKAI T. Dynamic recrystallization based on twinning in coarse-grained Mg[J]. Materials Science Forum, 2003, 419(1):521-526.
[8] WON J W, LEE T, HONG S G, et al. Role of deformation twins in static recrystallization kinetics of high-purity alpha titanium[J]. Metals and Materials International, 2016, 22(6):1041-1048.
[9] 杨平,孟利,毛卫民,等. 利用道次间退火改善镁合金轧制成形性的研究[J]. 材料热处理学报, 2005, 26(2):34-38. YANG P, MENG L, MAO W M, et al. The study on improving the formability of magnesium alloy by using the interpass annealing[J]. Transactions of Materials and Heat Treatment, 2005, 26(2):34-38.
[10] JÄGER A, LUKÁ? P, GÄRTNEROVÁ V, et al. Influence of annealing on the microstructure of commercial Mg alloy AZ31 after mechanical forming[J]. Materials Science and Engineering:A, 2006, 432(1/2):20-25.
[11] ROBSON J D, HENRY D T, DAVIS B. Particle effects on recrystallization in magnesium-manganese alloys:particle-stimulated nucleation[J]. Acta Materialia, 2009, 57(9):2739-2747.
[12] KABIR A S H, SANJARI M, SU J, et al. Effect of annealing on microstructure and texture evolution of uniaxial hot compressed Mg-Al-Sn alloys[J]. Journal of Materials Science, 2016, 51(3):1600-1609.
[13] 黄洪涛,Godfrey Andrew,刘伟,等. 样品取向对AZ31镁合金静态再结晶行为的影响[J]. 金属学报, 2012, 48(8):915-921. HUANG H T, ANDREW Godfrey, LIU W, et al. Effect of sample orientation on static recrystallization of AZ31 magnesium alloy[J]. Acta Metallurgica Sinica, 2012, 48(8):915-921.
[14] YI S, SCHESTAKOW I, ZAEFFERER S. Twinning-related microstructural evolution during hot rolling and subsequent annealing of pure magnesium[J]. Materials Science and Engineering:A, 2009, 516(1/2):58-64.
[15] 曾真. 初始组织对AZ31镁合金静态再结晶行为影响研究[D]. 重庆:重庆大学, 2012. ZENG Z. Influence of initial microstructure on static recrystallization of AZ31 magnesium alloy[D]. Chongqing:Chongqing University, 2012.
[16] WANG B, XIN R L, HUANG G J, et al. Effect of crystal orientation on the mechanical properties and strain hardening behavior of magnesium alloy AZ31 during uniaxial compression[J]. Materials Science and Engineering:A, 2012, 534(1):588-593.
[17] SU J, KABIR A S H, SANJARI M, et al. Correlation of static recrystallization and texture weakening of AZ31magnesium alloy sheets subjected to high speed rolling[J]. Materials Science and Engineering:A, 2016, 674(9):343-360.
[18] CHAO H Y, SUN H F, CHEN W Z, et al. Static recrystallization kinetics of a heavily cold drawn AZ31 magnesium alloy under annealing treatment[J]. Materials Characterization, 2011, 62(3):312-320.
[19] SILVA C J, KULA A, MISHRA R K, et al. Grain growth kinetics and annealed texture characteristics of Mg-Sc binary alloys[J]. Journal of Alloys and Compounds, 2016, 687(12):548-561.
[20] WANG M, XIN R, WANG B, et al. Effect of initial texture on dynamic recrystallization of AZ31 Mg alloy during hot rolling[J]. Materials Science and Engineering:A, 2011, 528(6):2941-2951.
[21] 曾真,信运昌,王茂银,等. 孪晶类型对AZ31镁合金静态再结晶的影响[J]. 材料热处理学报, 2012, 33(8):33-38. ZENG Z, XIN Y C, WANG M Y, et al. Influence of twin types on static recrystallization of AZ31 magnesium alloy[J]. Transactions of Materials and Heat Treatment, 2012, 33(8):33-38.
[22] BARNETT M R, NAVE M D, BETTLES C J. Deformation microstructures and textures of some cold rolled Mg alloys[J]. Materials Science and Engineering:A, 2004, 386(1/2):205-211.
[1] 闫钊鸣, 张治民, 杜玥, 张冠世, 任璐英. 均匀化处理对Mg-13Gd-3.5Y-2Zn-0.5Zr镁合金组织和力学性能的影响[J]. 材料工程, 2019, 47(5): 93-99.
[2] 周梦林, 饶少凯, 周均, 郑照县, 肖衡, 郑靖. 微弧氧化处理镁合金在接骨板服役工况下的微动磨损特性[J]. 材料工程, 2018, 46(9): 80-87.
[3] 韦竺施, 崔丽, 贺定勇, 王智慧, 陈俐. 钢/铝异种合金激光深熔焊接头界面金属间化合物的EBSD研究[J]. 材料工程, 2018, 46(7): 113-120.
[4] 曾文, 栾佰峰, 刘娜. 锆合金中的氢化物相及氢化物取向[J]. 材料工程, 2018, 46(6): 11-18.
[5] 刘军, 张金玲, 渠治波, 于彦冲, 许并社, 王社斌. 稀土Gd对AZ31镁合金耐蚀性能的影响[J]. 材料工程, 2018, 46(6): 73-79.
[6] 王晨, 王魁, 肖小波, 丁浩, 汪炳叔, 毛朝武, 张维林, 金钢南. 钨酸钠对取向硅钢绝缘涂层性能的影响[J]. 材料工程, 2018, 46(4): 51-57.
[7] 丁智平, 黄达勇, 荣继刚, 黄友剑, 曾家兴. 长玻纤增强复合材料注塑成型构件强度分析[J]. 材料工程, 2018, 46(4): 111-119.
[8] 金玉花, 甘瑞根, 陈飞, 邵庆丰, 王希靖, 郭廷彪. 搅拌摩擦焊辅助Al/Zn/Mg接头扩散连接[J]. 材料工程, 2018, 46(3): 55-60.
[9] 许婷, 方晓英, 朱言利, 王铭, 尹文红, 郭红. 双相不锈钢中奥氏体沉淀相的晶粒取向及界面特征分布[J]. 材料工程, 2018, 46(2): 34-40.
[10] 韩宝帅, 薛祥, 赵志勇, 牛涛, 曲海涛, 徐严谨, 侯红亮. 碳纳米管纤维与薄膜致密化研究现状[J]. 材料工程, 2018, 46(11): 37-44.
[11] 何柏林, 江明明, 于影霞, 李力. 超声冲击处理MB8镁合金十字接头的表层组织及疲劳性能[J]. 材料工程, 2018, 46(10): 70-76.
[12] 张亮亮, 王希靖, 刘骁. 6082铝合金搅拌摩擦焊焊接过程中晶粒取向演化[J]. 材料工程, 2018, 46(10): 55-59.
[13] 刘恭涛, 刘志桥, 杨平, 毛卫民. 初次再结晶组织和渗氮量对低温渗氮取向硅钢二次再结晶行为的影响[J]. 材料工程, 2018, 46(1): 16-24.
[14] 游国强, 郭伟, 张秀丽, 文恒玉, 沈鹭. 镁合金摩擦焊的研究进展[J]. 材料工程, 2018, 46(1): 141-148.
[15] 孙颖迪, 陈秋荣. AZ31镁合金管材挤压成型数值模拟与实验研究[J]. 材料工程, 2017, 45(6): 1-7.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn