Please wait a minute...
 
材料工程  2019, Vol. 47 Issue (8): 33-39    DOI: 10.11868/j.issn.1001-4381.2019.000048
  综述 本期目录 | 过刊浏览 | 高级检索 |
NITE工艺制备SiCf/SiC复合材料的研究进展
高晔, 焦健
中国航发北京航空材料研究院 先进复合材料国防科技重点实验室, 北京 100095
Research progress on NITE process for fabricating SiCf/SiC composites
GAO Ye, JIAO Jian
National Key Laboratory of Advanced Composites, AECC Beijing Institute of Aeronautical Materials, Beijing 100095, China
全文: PDF(904 KB)   HTML()
输出: BibTeX | EndNote (RIS)      
摘要 NITE(nano-infiltration and transient eutectic)工艺作为一种制备碳化硅纤维增强碳化硅基(SiCf/SiC)复合材料的新方法,具备周期短、工艺简单、生产成本低等优点,制备出的复合材料基体致密、孔隙率低、不含残余硅,适用于1400℃及以上高温长时服役环境应用。目前,日本、美国等国家基于其成熟的第三代碳化硅纤维,对该技术开展了较为深入的研究,并在核能工业热交换器、航空发动机燃烧室衬套等领域进行了应用验证。本文针对NITE工艺从基本概念、工艺流程、制备的SiCf/SiC复合材料和构件考核验证及前景展望四方面进行综合阐述,以期为国内该工艺的发展及应用提供一定程度的参考。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
高晔
焦健
关键词 SiCf/SiC复合材料NITE工艺碳化硅纤维    
Abstract:Nano-infiltration and transient eutectic (NITE) process is a new method for fabricating silicon carbide fiber reinforced silicon carbide based (SiCf/SiC) composites, which has the advantages of short production cycle, simple process and low production cost. The material made by NITE process is with compact matrix, low porosity, and free of residual silicon, therefore, it is suitable for high temperature and long service environments at 1400℃ and above. At present, Japan, the United States and other countries have carried out in-depth research on this technology based on the mature third-generation silicon carbide fiber, and applied the composites in fields such as nuclear energy industrial heat exchangers and aero-engine combustor liners. In this paper, the basic concepts, the manufacturing process, the mechanical properties of SiCf/SiC composites and component verification and prospects of NITE process were reviewed, in order to provide the reference to a certain degree for the domestic development of this process.
Key wordsSiCf/SiC composite    NITE progress    silicon carbide fiber
收稿日期: 2019-01-15      出版日期: 2019-08-22
中图分类号:  TB332  
通讯作者: 焦健(1976-),男,研究员,博士,研究方向:陶瓷基复合材料工艺,联系地址:北京市81信箱5分箱(100095),E-mail:18601192125@163.com     E-mail: 18601192125@163.com
引用本文:   
高晔, 焦健. NITE工艺制备SiCf/SiC复合材料的研究进展[J]. 材料工程, 2019, 47(8): 33-39.
GAO Ye, JIAO Jian. Research progress on NITE process for fabricating SiCf/SiC composites. Journal of Materials Engineering, 2019, 47(8): 33-39.
链接本文:  
http://jme.biam.ac.cn/CN/10.11868/j.issn.1001-4381.2019.000048      或      http://jme.biam.ac.cn/CN/Y2019/V47/I8/33
[1] 刘虎,杨金华,周怡然,等. 国外航空发动机用SiCf/SiC复合材料的材料级性能测试研究进展[J]. 材料工程, 2018, 46(11):1-12. LIU H, YANG J H, ZHOU Y R, et al. Progress in coupon tests of SiCf/SiC ceramic matrix composites used for aero engines[J]. Journal of Materials Engineering, 2018, 46(11):1-12.
[2] 刘海韬,杨玲伟,韩爽. 连续纤维增强陶瓷基复合材料微观力学研究进展[J]. 无机材料学报, 2018, 33(7):711-720. LIU H T, YANG L W, HAN S. Research progress on micro-mechanical property of continuous fiber-reinforced ceramic matrix composites[J]. Journal of Inorganic Materials, 2018, 33(7):711-720
[3] 焦健,杨金华,李宝伟. 熔渗法制备陶瓷基复合材料的研究进展[J]. 航空制造技术, 2015(增刊2):1-6. JIAO J, YANG J H, LI B W. Progress in ceramic matrix composites fabricated by melt infiltration process[J]. Aeron-autical Manufacturing Technology, 2015(Suppl 2):1-6.
[4] IDRIS M I, YAMAZAKI S, YOSHIDA K, et al. Defects anni-hilation behavior of neutron-irradiated SiC ceramics densified by liquid-phase-assisted method after post-irradiation annealing[J]. Nuclear Materials and Energy, 2016, 9:199-206.
[5] 王洪达,周海军,董绍明,等. SiCf/SiC复合材料耐高温氟熔盐腐蚀性能研究[J]. 无机材料学报, 2017, 32(11):1133-1140. WANG H D, ZHOU H J, DONG S M, et al. Corrosion behavior of SiCf/SiC composites in high temperature fluoride salt environment[J]. Journal of Inorganic Materials, 2017, 32(11):1133-1140.
[6] 朱丹,李玉凤,高明霞,等. SiCf/SiC陶瓷基复合材料制备技术与性能研究进展[J]. 材料导报, 2008, 22(3):55-59. ZHU D, LI M F, GAO M X, et al. Research development of fabrication techniques and properties of SiCf/SiC ceramic matrix composite[J]. Materials Review, 2008, 22(3):55-59.
[7] KATOH Y, KOHYAMA A, NOZAWA T, et al. SiC/SiC comp-osites through transient eutectic-phase route for fusion applications[J]. Journal of Nuclear Materials, 2004, 329/333:587-591.
[8] HIROHATA Y, JINUSHI T, YAMAUCHI Y, et al. Gas perm-eability of SiC/SiC composites as fusion reactor material[J]. Fusion Engineering and Design, 2002, 61/62:699-704.
[9] KATOH Y, DONG S M, KOHYAMA A. Thermo-mechanical properties and microstructure of silicon carbide composites fabricated by nano-infiltrated transient eutectoid process[J]. Fusion Engineering and Design, 2002, 61/62:723-731.
[10] KOHYAMA A.The present status of SiC/SiC R & D for nuclear application in Japan[J]. IOP Conference Series:Materials Science and Engineering, 2011, 18:162002.
[11] KISHIMOTO H, ABE T, PARK J S, et al. SiC/SiC and W/SiC/SiC composite heater by NITE-method for IFMIF and fission reactor irradiation rigs[J]. IOP Conference Series:Materials Science and Engineering, 2011, 18:162018.
[12] 赵爽,周新贵,余金山. SiC/SiC复合材料的制备与性能研究进展[J]. 材料导报, 2013, 27(1):66-70. ZHAO S, ZHOU X G, YU J S. Research and development in fabrication and properties of SiC/SiC composites[J]. Materials Review, 2013, 27(1):66-70.
[13] PARK J S, JUNG H C, OOI Y, et al. Fabrication of enviro-nmentally resistant NITE-SiC/SiC composites[J]. IOP Conf-erence Series:Materials Science and Engineering, 2011, 18:202012.
[14] PARK J, KOHYAMA A, HINOKI T, et al. Efforts on large scale production of NITE-SiC/SiC composites[J]. Journal of Nuclear Materials, 2007, 367/370:719-724.
[15] DONG S, KATOH Y, KOHYAMA A. Processing optimization and mechanical evaluation of hot pressed 2D Tyranno-SA/SiC composites[J]. Journal of the European Ceramic Society, 2003, 23(8):1223-1231.
[16] DONG S, KATOH Y, KOHYAMA A. Preparation of SiC/SiC composites by hot pressing, using Tyranno-SA fiber as reinforc-ement[J]. Journal of the American Ceramic Society, 2003, 86(1):26-32.
[17] PARK J S, KATOH Y, KOHYAMA A, et al. Tailoring the microstructure of hot-pressed SiC by heat treatment[J]. Journal of Nuclear Materials, 2004, 329/333:558-561.
[18] 董绍明,丁玉生,江东亮,等. 制备工艺对热压烧结SiC/SiC复合材料结构与性能的影响[J].无机材料学报,2005,20(4):883-888. DONG S M, DING Y S, JIANG D S, et al. Effects of preparation conditions on the microstructure and properties of hot pressed SiC/SiC composites[J]. Journal of Inorganic Materials, 2005, 20(4):883-888.
[19] 丁玉生,董绍明,高乐,等. 烧结温度对Cf/SiC复合材料结构及性能的影响[J]. 无机材料学报, 2008, 23(6):1151-1154. DING Y S, DONG S M, GAO L, et al. Effect of sintering temperature on microstructure and properties of Cf/SiC composites[J]. Journal of Inorganic Materials, 2008, 23(6):1151-1154.
[20] SHIMODA K, HINOKI T, KATOH Y, et al. Development of the tailored SiC/SiC composites by the combined fabrication process of ICVI and NITE methods[J]. Journal of Nuclear Materials, 2009, 384(2):103-108.
[21] NAKAZATO N,KISHIMOTO H,SHIMODA K,et al. Effects of preform densification on near-net shaping of NITE-SiC/SiC composites[J]. IOP Conference Series:Materials Science and Engineering, 2011, 18:202011.
[22] SHIMODA K, KOHYAMA A, HINOKI T. High mechanical performance SiC/SiC composites by NITE process with tailoring of appropriate fabrication temperature to fiber volume fraction[J]. Composites Science and Technology, 2009, 69(10):1623-1628.
[23] SHIMODA K, PARK J S, HINOKI T, et al. Microstructural optimization of high-temperature SiC/SiC composites by NITE process[J]. Journal of Nuclear Materials, 2009, 386/388:634-638.
[24] SHIMODA K, PARK J, HINOKI T, et al. Influence of pyrol-ytic carbon interface thickness on microstructure and mechanical properties of SiC/SiC composites by NITE process[J]. Composites Science and Technology, 2008, 68(1):98-105.
[25] KOHYAMA A, PARK J, JUNG H. Advanced SiC fibers and SiC/SiC composites toward industrialization[J]. Journal of Nuclear Materials, 2011, 417(1/3):340-343.
[26] KOHYAMA A, KOHNO Y, KISHIMOTO H, et al. Indust-rialization of advanced SiC/SiC composites and SiC based composites; intensive activities at muroran institute of technology under OASIS[J]. IOP Conference Series:Materials Science and Engineering, 2011, 18:202002.
[27] HAYASAKAA D, PARK J, KISHIMOTO H, et al. Gas leak tightness of SiC/SiC composites at elevated temperature[J]. Fusion Science and Technology, 2016, 109/111:1498-1501.
[28] IDRISA M I, KONISHIB H, IMAIB M, et al. Neutron irrad-iation swelling of SiC and SiCf/SiC for advanced nuclear applications[J]. Energy Procedia, 2015, 71:328-336.
[29] NOZAWA T, OZAWA K, ASAKURA Y, et al. Evaluation of damage accumulation behavior and strength anisotropy of NITE SiC/SiC composites by acoustic emission, digital image correlation and electrical resistivity monitoring[J]. Journal of Nuclear Materials, 2014, 455(1/3):549-553.
[30] PARK J S, KIM J, NAKAZATO N, et al. Oxidation resistance of NITE-SiC/SiC composites with/without CVD-SiC environ-mental barrier coating[J]. Ceramics International, 2018, 44(14):17319-17325.
[31] TERRANI K A, ANG C, SNEAD L L, et al. Irradiation stability and thermo-mechanical properties of NITE-SiC irradiated to 10dpa[J]. Journal of Nuclear Materials, 2018, 499:242-247.
[32] HINO T, HAYASHISHITA E, KOHYAMA A, et al. Helium gas permeability of SiC/SiC composite after heat cycles[J]. Journal of Nuclear Materials, 2007, 367/370:736-741.
[33] HINO T,HAYASHISHITA E,YAMAUCHI Y,et al. Helium gas permeability of SiC/SiC composite used for in-vessel components of nuclear fusion reactor[J]. Fusion Engineering and Design, 2005, 73(1):51-56.
[34] 周新贵,张长瑞,何新波,等. 热解碳涂层碳纤维增强碳化硅复合材料热压工艺研究[J]. 材料工程, 2000(3):39-41. ZHOU X G, ZHANG C R, HE X B, et al. A study on the hot press of pyrolysised carbon coated carbon fiber reinforced silicon carbide composite[J]. Journal of Materials Engineering, 2000(3):39-41.
[35] 张新明,何新波,张长瑞,等. 热压烧结Cf/SiC复合材料的力学性能[J]. 硅酸盐学报, 1999, 27(5):611-617. ZHANG X M, HE X B, ZHANG C R, et al. Mechanical properties of hot-pressed carbon fiber reinforced silicon carbide composites[J]. Journal of The Chinese Ceramic Society, 1999, 27(5):611-617.
[36] 曹英斌,张长瑞,周新贵,等. 热压烧结法制备Cf/SiC陶瓷基复合材料研究[J]. 宇航材料工艺, 1998(6):35-37. CAO Y B, ZHANG C R, ZHOU X G, et al. The study of Cf/SiC ceramic matrix composites fabricated by hot pressing sintering method[J]. Aerospace Materials & Technology, 1998(6):35-37.
[37] 何新波,张长瑞,周新贵,等. 先驱体转化-热压烧结碳纤维增韧碳化硅复合材料的显微结构[J]. 航空材料学报, 1999, 19(3):43-50. HE X B, ZHANG C R, ZHOU X G, et al. Microstructure of the Cf/SiC composites by precursor conversion-hot pressing sintering[J]. Journal of Aeronautical Materials, 1999, 19(3):43-50.
[38] 周松青,唐绍裘,肖汉宁,等. 碳化硅及其复合材料的烧结[J]. 陶瓷学报, 1999(1):41-48. ZHOU S Q, TANG S Q, SHAO H N, et al. Sintering on SiC and its composite material[J]. Journal of Ceramics, 1999(1):41-48.
[39] 丁玉生,冯债,曹伟,等. 热压烧结制备短切SiC/SiC复合材料[C]//2004年材料科学与工程新进展论文集. 北京:中国材料研究学会, 2004:887-891. DING Y S, FENG Z, CAO W, et al. Fabrication of short chop SiC/SiC composites by hot-pressing[C]//2004 Material Science and Engineering. Beijing:Chinese Materials Research Society, 2004:887-891.
[40] HINO T,HAYASHISHITA E,YAMADAA T,et al.Progress of plasma surface interaction study on low activation materials[J]. Fusion Engineering and Design, 2006, 81(1/7):181-186.
[41] KONISHIA H, IDRIS M I, IMAI M, et al. Neutron irradiation effects of oxide sintering additives for SiCf/SiC composites[J]. Energy Procedia, 2015, 71:306-312.
[42] PARISHA C M, TERRANI K A, KIM Y, et al. Microstru-cture and hydrothermal corrosion behavior of NITE-SiC with various sintering additives in LWR coolant environments[J]. Journal of the European Ceramic Society, 2017, 37:1261-1279.
[43] KOYANAGI T, KONDO S, HINOKI T. The influence of sintering additives on the irradiation resistance of NITE SiC[J]. Journal of Nuclear Materials, 2011, 417(1/3):435-439.
[44] ABE T, KISHIMOTO H, NAKAZATO N, et al. SiC/SiC composite heater for IFMIF[J]. Fusion Engineering and Design, 2012, 87(7/8):1258-1260.
[45] 董绍明,陈忠明,谭寿洪,等. 高温等静压后处理液相烧结SiC陶瓷的强化与增韧机理[J]. 硅酸盐学报, 1998, 12(6):754-761. DONG S M, CHEN Z M, TAN S H, et al. Strengthening and toughening mechanism of post-hot isostatic pressing of liquid phase sintered SiC[J]. Journal of The Chinese Ceramic Society, 1998, 12(6):754-761.
[46] KATOH Y, SNEAD L L, JR. HENAGER C H, et al. Current status and recent research achievements in SiC/SiC composites[J]. Journal of Nuclear Materials, 2014, 455(1/3):387-397.
[47] NOBORIO K, YAMAMOTO Y, TAKEUCHI Y, et al. Develo-pment of high temperature SiC/SiC composite intermediate heat exchanger He and LiPb[C]//23rd IEEE/NPSS Symposium on Fusion Engineering, San Diego:IEEE, 2009.
[48] SATORI K, KISHIMOTO H, PARK J S, et al. Thermal insulator of porous SiC/SiC composites for fusion blanket system[J]. IOP Conference Series:Materials Science and Engineering, 2011, 18:162019.
[49] PARK Y, HINOKI T, KOHYAMA A. Development of multi-functional NITE-porous SiC for ceramic insulators[J]. Journal of Nuclear Materials, 2009, 386/388:1014-1017.
[50] NOZAWA T, HINOKI T, HASEGAWA A, et al. Recent advances and issues in development of silicon carbide composites for fusion applications[J]. Journal of Nuclear Materials, 2009, 386/388:622-627.
[1] 朱文华, 岳建岭, 黄小忠, 王春齐, 胡思闽, 王畅. 电子束辐照含铍聚碳硅烷制备含铍碳化硅纤维[J]. 材料工程, 2018, 46(12): 54-60.
[2] 王华, 张云鹏, 孙博. 氢气气氛下SiC纤维的热稳定性[J]. 材料工程, 2009, 0(12): 26-29.
[3] 李家俊, 郑长进, 赵乃勤, 郭新权. 含碳化硅纤维正交电路屏的吸波复合材料的研究[J]. 材料工程, 2005, 0(3): 6-9,51.
[4] 朱时珍, 汪树军. FCVI工艺制备SiCf/SiC复合材料结构与性能研究[J]. 材料工程, 2001, 0(4): 37-39.
[5] 王军, 陈革, 宋永才, 王应德, 冯春祥. 以异型碳化硅纤维为吸收剂的结构吸波材料设计[J]. 材料工程, 2000, 0(7): 27-29.
[6] 王军, 宋永才, 冯春祥. 掺混型碳化硅纤维及其微波吸收特性[J]. 材料工程, 1998, 0(5): 41-43,47.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn