PA66纤维含量对多孔铝基陶瓷型芯气孔率的影响

doi:10.11868/j.issn.1001-4381.2019.000361

摘要
参考文献
相关文章
Metrics

全文: PDF(1604 KB) HTML()
输出: BibTeX | EndNote (RIS) 背景资料

文章导读

摘要为了解决氧化铝陶瓷型芯不易脱芯的难题，加入一定量的PA66纤维作为成孔材料，以热压注的方法制备多孔铝基陶瓷型芯。研究PA66纤维含量对铝基陶瓷型芯气孔率，室温抗弯强度和烧结收缩率的影响；分析PA66纤维含量对氧化铝陶瓷型芯气孔率的影响机理。结果表明：PA66纤维的加入显著提高了氧化铝陶瓷型芯的气孔率，有效延缓了型芯的烧结收缩；随着PA66纤维加入量的增多，氧化铝陶瓷型芯气孔率增大，室温抗弯强度和线收缩率均减小。当PA66纤维含量为0.9%（质量分数）时，氧化铝陶瓷型芯的气孔率为41.14%，抗弯强度为15.33 MPa，线收缩率为0.418%。

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	芦刚
	查军辉
	严青松
	宋方睿
	于航

关键词 ： PA66纤维, 铝基陶瓷型芯, 气孔率, 抗弯强度, 烧结收缩

Abstract：In order to solve the problem that alumina based ceramic core is not easy to remove core, a certain amount of PA66 fiber was added as pore forming material to prepare porous aluminum based ceramic core by hot pressing. The influence of PA66 fiber content on the porosity, room temperature bending strength and sintering shrinkage of aluminum based ceramic core was investigated, and the mechanism of PA66 fiber content on the porosity of aluminum based ceramic core was analyzed. The results show that the porosity of alumina based ceramic core is significantly increased by adding PA66 fiber, and the sintering shrinkage of the core is effectively blocked. With the increase of PA66 fiber, the porosity of alumina based ceramic core is increased, and the bending strength and line shrinkage rate at room temperature are decreased. When the PA66 fiber content is 0.9%(mass fraction), the porosity of the aluminum based ceramic core is 41.14%, the bending strength is 15.33 MPa, and the linear shrinkage rate is 0.418%.

Key words： PA66 fiber aluminum based ceramic core porosity bending strength sintering shrinkage

收稿日期: 2019-04-17 出版日期: 2020-07-21

中图分类号:

TQ174.75

基金资助:

通讯作者: 芦刚(1982-),男,副教授,博士,研究方向为液态金属精密成形理论及工艺研究,联系地址:江西省南昌市新建区丰和南大道696号(330063),E-mail:aimulalg@163.com E-mail: aimulalg@163.com

引用本文:

芦刚, 查军辉, 严青松, 宋方睿, 于航. PA66纤维含量对多孔铝基陶瓷型芯气孔率的影响[J]. 材料工程, 2020, 48(7): 170-175.
LU Gang, ZHA Jun-hui, YAN Qing-song, SONG Fang-rui, YU Hang. Influence of PA66 fiber content on porosity of porous aluminum based ceramic core. Journal of Materials Engineering, 2020, 48(7): 170-175.

链接本文:

http://jme.biam.ac.cn/CN/10.11868/j.issn.1001-4381.2019.000361 或 http://jme.biam.ac.cn/CN/Y2020/V48/I7/170

[1] 潘继勇,刘孝福,何立明,等. 硅基陶瓷型芯的研究进展[J]. 铸造, 2012, 61(2):174-178. PAN J Y, LIU X F, HE L M, et al. Research progress of silica-base ceramic core[J]. Foundry, 2012, 61(2):174-178.
[2] 陈晓燕,肖旅,余建波,等. 高温合金空心叶片用陶瓷型芯概述[J]. 铸造, 2016, 65(9):868-873. CHEN X Y, XIAO L, YU J B, et al. Review of ceramic cores in investment casting of superalloy hollow blades[J]. Foundry, 2016, 65(9):868-873.
[3] 鲁中良,姜博,江平,等. 基于光固化成型技术的空心叶片陶瓷铸型制造缺陷控制[J]. 机械工程学报, 2014, 50(21):111-117. LU Z L, JIANG B, JIANG P, et al. Defects control of manufacturing ceramic mold of hollow turbine blade based on stereo lithography[J]. Journal of Mechanical Engineering, 2014, 50(21):111-117.
[4] 康海峰,李飞,赵彦杰,等. 高温合金空心叶片精密铸造用陶瓷型芯与型壳的研究现状[J]. 材料工程, 2013(8):85-91. KANG H F, LI F, ZHAO Y J, et al. Research status on ceramic cores and shells for superalloy hollow blades investment casting[J]. Journal of Materials Engineering, 2013(8):85-91.
[5] 王丽丽,李嘉荣,唐定中,等. SiO₂-ZrO₂陶瓷型芯与DZ125,DD5和DD6三种铸造高温合金的界面反应[J]. 材料工程, 2016, 44(3):9-14. WANG L L, LI J R, TANG D Z, et al. Interfacial reactions between SiO₂-ZrO₂ ceramic core and DZ125,DD5,DD6 casting superalloys[J].Journal of Materials Engineering,2016,44(3):9-14.
[6] 龙永成,刘志义,郛敏,等. 烧结温度对硅基陶瓷型芯性能的影响[J]. 粉末冶金材料科学与工程, 2011, 16(4):591-596. LONG Y C, LIU Z Y, FU M, et al. Effect of sintering temperature on properties of silica based ceramic core[J]. Materials Science and Engineering of Powder Metallurgy,2011,16(4):591-596.
[7] 王宝全,余建波,任忠鸣,等. 多孔铝基陶瓷型芯的制备及其性能[J]. 无机材料学报, 2012, 27(3):239-244. WANG B Q, YU J B, REN Z M, et al. Fabrication and properties of porous alumina-based ceramic core[J]. Journal of Inorganic Materials, 2012, 27(3):239-244.
[8] 王飞,李飞,刘和洲,等. 高温合金空心叶片用陶瓷型芯的研究进展[J]. 航空制造技术, 2009(19):60-64. WANG F, LI F, LIU H Z, et al. Review of ceramic core for superalloy hollow blade[J]. Aeronautical Manufacturing Technology, 2009(19):60-64.
[9] 李彪,娄延春,苏贵桥,等. 高温合金空心叶片用氧化铝基陶瓷型芯脱芯研究现状[J]. 铸造, 2014, 63(3):232-236. LI B,LOU Y C, SU G Q, et al. Research status on removal technology of alumina-based ceramic cores for superalloy hollow blades[J]. Foundry, 2014, 63(3):232-236.
[10] 戴培赟,王泌宝,李晓丽. 多孔陶瓷制备技术研究进展[J]. 陶瓷学报, 2013, 34(1):95-101. DAI P Y, WANG B B, LI X L. Research progress on preparation of porous ceramics[J]. Journal of Ceramics, 2013, 34(1):95-101.
[11] 朱新文,江东亮,谭寿洪. 多孔陶瓷的制备、性能及应用(Ⅰ):多孔陶瓷的制造工艺[J]. 陶瓷学报, 2003, 24(1):40-45. ZHU X W, JIANG D L, TAN S H. Processing,properties and application of porous ceramics(Ⅰ):processing of porous ceramics[J]. Journal of Ceramics, 2003, 24(1):40-45.
[12] 芦刚,郭振华,严青松,等. 复合纤维配比对精铸硅溶胶型壳性能的影响[J]. 复合材料学报, 2018, 35(6):1535-1541. LU G, GUO Z H, YAN Q S, et al. Effects of composite fiber ratio on the properties of silica sol shell for investment casting[J]. Acta Materiae Compositae Sinica, 2018, 35(6):1535-1541.
[13] 王丽阁,左彬,朱广志,等. 孔隙率对氧化铝基可溶陶瓷型芯性能的影响[J]. 特种铸造及有色合金, 2012, 32(5):450-452. WANG L G, ZUO B, ZHU G Z, et al. Effect of porosity on the properties of the soluble alumina based ceramic core[J]. Special Casting & Nonferrous Alloys, 2012, 32(5):450-452.
[14] ISOBE T, TOMITA T, KAMESHIMA Y, et al. Preparation and properties of porous alumina ceramics with oriented cylindrical pores produced by an extrusion method[J]. Journal of the European Ceramic Society, 2006, 26(6):957-960.
[15] ISOBE T, KAMESHIMA Y, NAKAJIMA A, et al. Extrusion method using nylon 66 fibers for the preparation of porous alumina ceramics with oriented pores[J]. Journal of the European Ceramic Society, 2006, 26(12):2213-2217.
[16] 李风光,唐世艳,刘富初,等. 淀粉对氧化铝基陶瓷型芯性能的影响[J]. 航空材料学报, 2016, 36(6):86-91. LI F G, TANG S Y, LIU F C, et al. Effects of starch on properties of alumina-based ceramic core[J]. Journal of Aeronautical Materials, 2016, 36(6):86-91.
[17] 戚建强,黄勇,欧阳世翕,等. 淀粉原位固化制备氧化铝多孔陶瓷[J]. 稀有金属材料与工程, 2007, 36(增刊1):337-340. QI J Q, HUANG Y, OUYANG S X, et al. Preparation of porous alumina ceramics by in-situ starch curing[J]. Rare Metal Materials and Engineering, 2007, 36(Suppl 1):337-340.
[18] 曹小刚,田杰谟. 多孔氧化铝陶瓷的凝胶注模成型[J]. 功能材料, 2001, 32(5):523-528. CAO X G, TIAN J M. Gelcasting of porous alumina ceramics[J]. Journal of Functional Materials, 2001, 32(5):523-528.
[19] 彭小芹,王勇威,蒲心诚. 尼龙纤维对混凝土性能的改善[J]. 新型建筑材料, 2003(4):10-12. PENG X Q, WANG Y W, PU X C. Improvement of concrete properties by nylon fiber[J]. New Building Materials, 2003(4):10-12.
[20] 马小杰,吴芳,李鹏. 尼龙纤维增强水泥砂浆性能的试验研究[J]. 硅酸盐通报, 2016, 35(1):328-335. MA X J, WU F, LI P. Properties of nylon fiber reinforced cement mortar[J]. Bulletin of the Chinese Ceramic Society, 2016, 35(1):328-335.

[1]	史思涛, 陈畅, 郭政, 李国新, 伍勇华, 苏明周, 王会萌. 原料配比对多孔MgO/Fe-Cr-Ni复合材料性能的影响[J]. 材料工程, 2019, 47(4): 167-173.
[2]	陈敬炎, 吴甲民, 陈安南, 肖欢, 李国锐, 刘梦月, 李晨辉, 史玉升. 基于激光选区烧结的煤系高岭土多孔陶瓷的制备及其性能[J]. 材料工程, 2018, 46(7): 36-43.
[3]	卢国锋, 乔生儒. Si-O-C界面层对C/SiC-N复合材料力学性能和热膨胀性能的影响[J]. 材料工程, 2018, 46(7): 83-87.
[4]	吕凯, 刘向东, 王浩, 冯华, 李艳芬. 短切硅酸铝纤维增强硅溶胶型壳的抗弯强度及高温自重变形[J]. 材料工程, 2015, 43(7): 56-61.
[5]	郭霞, 关志东, 刘遂, 晏冬秀, 刘卫平, 孙凯. 修理工艺对边缘封闭蜂窝夹层结构弯曲性能的影响[J]. 材料工程, 2013, 0(12): 27-31.
[6]	袁华, 王成国, 卢文博, 张姗, 陈旸, 谢奔. 连续炭纤维增强受电弓滑板致密化及其性能[J]. 材料工程, 2012, 0(7): 5-9.
[7]	刘晓光, 陈大明, 仝建峰, 李宝伟. 烧结温度对8%Y₂O₃-ZrO₂陶瓷结构与性能的影响[J]. 材料工程, 2004, 0(8): 44-46,50.
[8]	薛明, 曹腊梅. 单晶空心叶片用AC-2陶瓷型芯的组织和性能研究[J]. 材料工程, 2002, 0(4): 33-34,37.
[9]	翟华嶂, 李建保, 黄向东, 戴金辉, 张淑霞. 退火对Al₂O₃/SiC纳米复合材料裂纹愈合行为的影响[J]. 材料工程, 2002, 0(10): 3-6.
[10]	王鲁, 李雪利, 王富耻, 刘国权. 功能梯度材料表面分形维数的研究[J]. 材料工程, 2001, 0(11): 25-27.

Viewed

Full text

Abstract

Cited

Shared

Discussed