Please wait a minute...
 
材料工程  2013, Vol. 0 Issue (8): 1-10    DOI: 10.3969/j.issn.1001-4381.2013.08.001
  论文 本期目录 | 过刊浏览 | 高级检索 |
冷喷涂制备复合材料涂层研究现状
李文亚1, 黄春杰1, 余敏2, 廖汉林2
1. 西北工业大学 凝固技术国家重点实验室, 西安 710072;
2. 贝尔福-蒙贝利亚技术大学, 法国 贝尔福 90010
State-of-the-art of Cold Spraying Composite Coatings
LI Wen-ya1, HUANG Chun-jie1, YU Min2, LIAO Han-lin2
1. State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072, China;
2. Technical University of Belfort-Montbeliard, Belfort 90010, France
全文: PDF(1147 KB)   HTML()
输出: BibTeX | EndNote (RIS)      
摘要 鉴于目前冷喷涂技术制备复合材料涂层受到国内外越来越多学者的关注,本文在大量文献分析的基础上对冷喷涂制备复合材料涂层进行了分类和总结。首先,探讨了喷涂前粉末准备和喷涂工艺参数对复合材料涂层的影响;其次,归纳了冷喷涂制备的金属-金属、金属-陶瓷、金属-金属间化合物以及纳米复合材料涂层等研究成果;最后,分析了冷喷涂制备复合材料涂层的应用前景和当前存在的主要问题。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
李文亚
黄春杰
余敏
廖汉林
关键词 冷喷涂复合粉末工艺参数复合材料涂层    
Abstract:Based on the fact that cold spraying (CS) was increasingly attracting more and more attention from researchers worldwide, this paper made detailed summarization and discussion on fabricating composite coatings via CS according to the published literature. Firstly, the powder preparation methods prior to spraying and the effects of processing parameters on deposition of composite coatings were explored. And then, the fabrication of metal-metal, metal-ceramic, metal-intermetallics and nano-composite coatings were summarized. Eventually, the present problems and potential applications existing in composite coatings fabricated by CS were discussed.
Key wordscold spraying    composite powder    process parameter    composite coating
收稿日期: 2013-05-20      出版日期: 2013-08-20
1:  TG174.442  
  TB33  
基金资助:教育部新世纪优秀人才计划资助项目(NCET-08-0463);霍英东教育基金青年教师基金资助项目(131052);"111"引智计划资助项目(B08040)
作者简介: 李文亚(1979-),男,教授,博士生导师,主要从事冷喷涂及摩擦焊技术方面的研究,联系地址:陕西省西安市友谊西路127号西北工业大学材料学院(710072),E-mail:liwy@nwpu.edu.cn
引用本文:   
李文亚, 黄春杰, 余敏, 廖汉林. 冷喷涂制备复合材料涂层研究现状[J]. 材料工程, 2013, 0(8): 1-10.
LI Wen-ya, HUANG Chun-jie, YU Min, LIAO Han-lin. State-of-the-art of Cold Spraying Composite Coatings. Journal of Materials Engineering, 2013, 0(8): 1-10.
链接本文:  
http://jme.biam.ac.cn/CN/10.3969/j.issn.1001-4381.2013.08.001      或      http://jme.biam.ac.cn/CN/Y2013/V0/I8/1
[1] PAPYRIN A. Cold spray technology[J]. Adv Mater Process,2001,159(9):49-51.
[2] ALKIMOV A P, KOSAREV V F, PAPYRIN A N. A method of cold gas dynamic deposition[J]. Dold Akad Nauk SSSR,1990,315(5):1062-1065.
[3] LI C J, LI W Y. Optimal design of a novel cold spray gun nozzle at a limited space[J]. J Therm Spray Techn,2005,14(3):391-395.
[4] LI W Y, LIAO H, DOUCHY G, et al. Optimal design of a cold spray nozzle by numerical analysis of particle velocity and experimental validation with 316L stainless steel powder[J]. Mater Des,2007,28(7):2129-2137.
[5] KLINKOV S V, KOSAREV V F, SOVA A A, et al. Deposition of multicomponent coatings by cold spray[J]. Surf Coat Tech,2008,202(24):5858-5862.
[6] MIL-STD-3021, Department of defense manufacturing process standard materials deposition of cold spray[S].
[7] WANG H T, YANG G J, LI C X. Effect of heat treatment on the microstructure and property of cold-sprayed nanostructured FeAl/Al2O3 intermetallic composite coating[J]. Vacuum,2008,83(1):146-152.
[8] LUO X T, YANG G J, LI C J, et al. High strain rate induced localized amorphization in cubic BN/NiCrAl nanocomposite through high velocity impact[J]. Scripta Mater,2011,65(7):581-584.
[9] PHANI P S, VISHNUKANTHAN V, SUNDARARAJAN G. Effect of heat treatment on properties of cold sprayed nanocrystalline copper alumina coatings[J]. Acta Mater,2007,55(14):4741-4751.
[10] 黄春杰, 李文亚, 余敏, 等. 冷喷涂制备颗粒增强钛基复合材料涂层研究[J]. 材料工程,2013,(4):1-5. HUANG C J, LI W Y, YU M, et al. Investigation on particles reinforced titanium matrix composite coating fabricated by cold spraying[J]. Journal of Materials Engineering,2013,(4):1-5.
[11] LIMA R S, KARTHIKEYAN J, KAY C M, et al. Microstructural characteristics of cold-sprayed nanostructured WC-Co coatings[J]. Thin Solid Films,2002,416(1-2):129-135.
[12] STOLTENHOFF T, KREYE H, RICHTER H J. An analysis of the cold spray process and its coatings[J]. J Therm Spray Techn,2002,11(4):542-550.
[13] EESLEY L G, ELMOURSI A, PATEL N. Thermal properties of kinetic spray Al-SiC metal-matrix composite[J]. J Mater Res, 2003,18(4):855-860.
[14] LI W Y, ZHANG G, LIAO H, et al. Characterizations of cold sprayed TiN particle reinforced Al2319 composite coating[J]. J Mater Process Tech,2008,202(1-3):508-513.
[15] ZHOU X L, MOU S J, WU X K, et al. Deposition behavior of mixed binary metallic powders in cold spraying process[J]. Appl Surf Sci,2011,257(24):10628-10633.
[16] PRICE T S, SHIPWAY P H, MCCARTNEY D G, et al. A method for characterizing the degree of inter-particle bond formation in cold sprayed coatings[J]. J Therm Spray Techn, 2007,16(4):566-570.
[17] WANG Q, SPENCER K, BIRBILIS N, et al. The influence of ceramic particles on bond strength of cold spray composite coatings on AZ91 alloy substrate[J]. Surf Coat Tech,2010,205(1):50-56.
[18] TAO Y S, XIONG T Y, SUN C, et al. Effect of α-Al2O3 on the properties of cold sprayed Al/α-Al2O3 composite coatings on AZ91D magnesium alloy[J]. Appl Surf Sci,2009,256(1):261-266.
[19] NOVOSELOVA T, CELOTTO S, MORGAN R, et al. Formation of TiAl intermetallics by heat treatment of cold-sprayed precursor deposits[J]. J Alloy Compd,2007,436(1-2):69-77.
[20] YU M, LI W Y, SUO X K, et al. Effects of gas temperature and ceramic particle content on microstructure and microhardness of cold sprayed SiCp/Al 5056 composite coatings[J]. Surf Coat Tech,2013,220:102-106.
[21] POIRIER D, LEGOUX J G, DREW R A L, et al. Consolidation of Al2O3/Al nanocomposite powder by cold spray[J]. J Therm Spray Techn,2011,20(1-2):275-284.
[22] WANG H T, LI C J, YANG G J, et al. Cold spraying of Fe/Al powder mixture: coating characteristics and influence of heat treatment on the phase structure[J]. Appl Surf Sci,2008,255(5):2538-2544.
[23] CHO S, TAKAGI K, KWON H, et al. Multi-walled carbon nanotube-reinforced copper nanocomposite coating fabricated by low-pressure cold spray process[J]. Surf Coat Tech,2012,206(16):3488-3494.
[24] TRIA S, ELKEDIM O, LI W Y, et al. Ball milled Ni-Ti powder deposited by cold spraying[J]. J Alloy Compd,2009,483(1-2):334-336.
[25] LI W Y, ZHANG G, ZHANG C, et al. Effect of ball milling of feedstock powder on microstructure and properties of TiN particle-reinforced Al alloy-based composites fabricated by cold spraying[J]. J Therm Spray Techn,2008,17(3):316-322.
[26] LI W Y, ZHANG C, LIAO H, et al. Characterizations of cold-sprayed nickel-alumina composite coating with relatively large nickel-coated alumina powder[J]. Surf Coat Tech,2008,202(19):4855-4860.
[27] BAKSHI S R, SINGH V, BALANI K, et al. Carbon nanotube reinforced aluminum composite coating via cold spraying[J]. Surf Coat Tech,2008,202(21):5162-5169.
[28] FENG C, GUIPONT V, JEANDIN M, et al. B4C/Ni composite coatings prepared by cold spray of blended or CVD-coated powders[J]. J Therm Spray Techn,2012,21(3-4):561-570.
[29] DEFORCE B S, EDEN T J, POTTE J K, et al. Cold spray Al-5%Mg coatings for the corrosion protection of magnesium alloys[J]. J Therm Spray Techn,2011,20(6):1352-1358.
[30] KIM J S, KWON Y S, LOMOVSKY O I, et al. Cold spraying of in situ produced TiB2-Cu nanocomposite powders[J]. Compos Sci Technol,2007,67(11-12):2292-2296.
[31] RICHER P, JODOIN B, AJDELSZTAJN L, et al. Substrate roughness and thickness effects on cold spray nanocrystalline Al-Mg coatings[J]. J Therm Spray Techn,2006,15(2):246-254.
[32] KANG H K, KANG S B. Tungsten/copper composite deposits produced by a cold spray[J]. Scripta Mater,2003,49(12):1169-1174.
[33] 高培虎, 杨冠军, 李毅功, 等. 粉末结构对冷喷涂纳米结构WC-Co沉积行为的影响[J]. 中国表面工程,2009,22(5):56-61. GAO P H, YANG G J, LI Y G, et al. Influence of powder porous structure on the deposition behavior of cold sprayed nano-structured WC-Co coatings[J]. China Surface Engineering,2009,22(5):56-61.
[34] LI C J, YANG G J, GAO P H, et al. Characterization of nanostructured WC-Co deposited by cold spraying[J]. J Therm Spray Techn,2007,16(5-6):1011-1020.
[35] KIM H J, LEE C H, HWANG S Y. Fabrication of WC-Co coatings by cold spray deposition[J]. Surf Coat Tech,2005,191(2-3):335-340.
[36] KIM H J, LEE C H, HWANG S Y. Superhard nano WC-12%Co coating by cold spray deposition[J]. Mat Sci Eng:A,2005,391(1-2):243-248.
[37] SHIN S M, YOON S H, KIM Y D, et al. Effect of particle parameters on the deposition characteristics of a hard/soft-particles composite in kinetic spraying[J]. Surf Coat Tech,2006,201(6):3457-3461.
[38] KLINKOV S V, KOSAREV V F, SOVA A A, et al. Calculation of particle parameters for cold spraying of metal-ceramic mixtures[J]. J Therm Spray Techn,2009,18(5-6):944-956.
[39] YU M, LI W Y, WANG F F, et al. Effect of particle and substrate preheating on particle deformation behavior in cold spraying[J]. Surf Coat Tech,2013,220:174-178.
[40] SHIN S, XIONG Y M, JI Y, et al. The influence of process parameters on deposition characteristics of a soft/hard composite coating in kinetic spray process[J]. Appl Surf Sci,2008,254(8):2269-2275.
[41] ZHAO Z B, GILLISPIE B A, SMITH J R. Coating deposition by the kinetic spray process[J]. Surf Coat Tech,2006,200(16-17):4746-4754.
[42] 李海祥, 李相波, 孙明先, 等. 冷喷涂Zn-50Al复合涂层在海水中的耐腐蚀性能[J]. 中国腐蚀与防护学报,2010,30(1):62-66. LI H X, LI X B, SUN M X, et al. Corrosion resistance of cold-sprayed Zn-50Al coatings in seawater[J]. Journal of Chinese Society for Corrosion and Protection,2010,30(1):62-66.
[43] KOIVULUOTO H, LAGERBOM J, VUORISTO P. Microstructural studies of cold sprayed copper, nickel, and nickel-30% copper coatings[J]. J Therm Spray Techn,2007,16(4):488-497.
[44] 李海祥, 孙明先, 李相波, 等. 冷喷涂65%Zn-Al复合涂层的沉积特性[J]. 中国有色金属学报,2010,20(7):1353-1359. LI H X, SUN M X, LI X B, et al. Depositing characteristic of 65%Zn-Al coatings produced by cold gas dynamic spray[J]. The Chinese Journal of Nonferrous Metals,2010,20(7):1353-1359.
[45] LEE H Y, JUNG S H, LEE S Y, et al. Alloying of cold-sprayed Al-Ni composite coatings by post-annealing[J]. Appl Surf Sci,2007,53(7):3496-3502.
[46] LEE H Y, JUNG S H, LEE S Y, et al. Fabrication of cold sprayed Al-intermetallic compounds coatings by post annealing[J]. Mat Sci Eng:A,2006,433(1-2):139-143.
[47] SPENCER K, ZHANG M X. The use of kinetic metallization to form intermetallic reinforced composite coatings by post-spray heat treatment[J]. Surf Coat Tech,2009,203(20-21):3019-3025.
[48] WU X K, ZHOU X L, CUI H, et al. Deposition behavior and characteristics of cold-sprayed Cu-Cr composite deposits[J]. J Therm Spray Techn,2012,21(5):792-799.
[49] ROLLAND G, SALLAMAND P, GUIPONT V, et al. Damage study of cold-sprayed composite materials for application to electrical contacts[J]. J Therm Spray Techn,2012,21(5):758-772.
[50] LI J F, AGYAKWA P A, JOHNSON C M, et al. Characterization and solderability of cold sprayed Sn-Cu coatings on Al and Cu substrates[J]. Surf Coat Tech,2010,204(9-10):1395-1404.
[51] 周勇, 杨冠军, 王洪铎, 等. 热处理对机械合金化Ni/Ti冷喷涂层金属间化合物形成的影响[J]. 焊接学报,2010,31(8):45-48. ZHOU Y, YANG G J, WANG H D, et al. Effect of annealing treatment on formation of intermetallic phase in cold-sprayed Ni/Ti mechanical alloying coating[J]. Transactions of the China Welding Institution,2010,31(8):45-48.
[52] NOVOSELOVA T, FOX P, MORGAN R, et al. Experimental study of titanium/aluminium deposits produced by cold gas dynamic spray[J]. Surf Coat Tech,2006,200(8):2775-2783.
[53] IRISSOU E, LEGOUX J G, ARSENAULT B, et al. Investigation of Al-Al2O3 cold spray coating formation and properties[J]. J Therm Spray Techn,2007,16(5-6):661-668.
[54] HODDER K J, IZADI H, MCDONALD A G, et al. Fabrication of aluminum-alumina metal matrix composites via cold gas dynamic spraying at low pressure followed by friction stir processing[J]. Mat Sci Eng:A,2012,556:114-121.
[55] LI W Y, ZHANG G, GUO X P, et al. Characterizations of cold-sprayed TiN particle-reinforced Al alloy-based composites-from structures to tribological behaviour[J]. Adv Eng Mater,2007,9(7):577-583.
[56] BU H Y, YANDOUZI M, LU C, et al. Cold spray blended Al+Mg17Al12 coating for corrosion protection of AZ91D magnesium alloy[J]. Surf Coat Tech,2012,207:155-162.
[57] SPENCER K, FABIJANIC D M, ZHANG M X. The use of Al-Al2O3 cold spray coatings to improve the surface properties of magnesium alloys[J]. Surf Coat Tech,2009,204:336-344.
[58] YANDOUZI M, RICHER P, JODOIN B. SiC particulate reinforced Al-12Si alloy composite coatings produced by the pulsed gas dynamic spray process: microstructure and properties[J]. Surf Coat Tech,2009,203(20-21):3260-3270.
[59] SANSOUCY E, MARCOUX P, AJDELSZTAJN L, et al. Properties of SiC-reinforced aluminum alloy coatings produced by the cold gas dynamic spraying process[J]. Surf Coat Tech,2008,202(16):3988-3996.
[60] LI C J, SUO X K, YANG G J, et al. Influence of annealing on the microstructure and wear performance of diamond/NiCrAl composite coating deposited through cold spraying[J]. Mater Sci Forum,2010,638-642:894-899.
[61] MIGUEL J M, GUILEMANY J M, DOSTA S. Effect of the spraying process on the microstructure and tribological properties of bronze-alumina composite coatings[J]. Surf Coat Tech,2010,205(7):2184-2190.
[62] HU H X, JIANG S L, TAO Y S, et al. Cavitation erosion and jet impingement erosion mechanism of cold sprayed Ni-Al2O3 coating[J]. Nucl Eng Des,2011,241(12):4929-4937.
[63] VANSTEENKISTE T H, ELMOURSI A, GORKIEWICZ D, et al. Fracture study of aluminum composite coatings produced by the kinetic spray method[J]. Surf Coat Tech,2005,194(1):103-110.
[64] SHKODKIN A, KASHIRIN A, KLYUEV O, et al. Metal particle deposition stimulation by surface abrasive treatment in gas dynamic spraying[J]. J Therm Spray Techn,2006,15(3):382-386.
[65] SPENCER K, FABIJANIC D M, ZHANG M X. The influence of Al2O3 reinforcement on the properties of stainless steel cold spray coatings[J]. Surf Coat Tech,2012,206:3275-3282.
[66] LI W Y, YANG C L, LIAO H. Effect of vacuum heat treatment on microstructure and microhardness of cold-sprayed TiN particle-reinforced Al alloy-based composites[J]. Mater Des,2011,32(1):388-394.
[67] SRIVASTAVA V C, SCHNEIDER A, UHLENWINKEL V, et al. Spray processing of 2014-Al+SiCp composites and their property evaluation[J]. Mat Sci Eng: A,2005,412(1-2):19-26.
[68] 刘卫, 余敏, 李文亚. 真空热处理对冷喷涂Ni-Al2O3复合涂层组织与显微硬度的影响[J]. 热加工工艺,2010,39(42):196-198. LIU W, YU M, LI W Y. Effect of vacuum heat treatment on microstructure and microhardness of Ni-Al2O3 composite coating prepared by cold spraying[J]. Hot Working Technology,2010,39(42):196-198.
[69] 所新坤, 杨冠军, 李长久. 镍基金刚石复合涂层的冷喷涂制备[J]. 材料研究与应用,2009,3(1):32-36. SUO X K, YANG G J, LI C J. Preparation of Ni-based alloy diamond composite coatings by cold spray[J]. Materials Research and Application,2009,3(1):32-36.
[70] 肖正涛, 李相波, 王佳, 等. 热处理对冷喷涂Cu-20%A12O3复合涂层耐磨损性能的影响研究[J]. 材料导报,2012,26(3):76-80. XIAO Z T, LI X B, WANG J, et al. Effect of heat treatment on tribological properties of cold-sprayed Cu-20%Al2O3 composite coatings[J]. Materials Review,2012,26(3):76-80.
[71] 王锋, 漆波, 陈清华, 等. 超音速冷喷涂Cu-Al2O3复合涂层特性[J]. 材料导报,2009,23(6):47-50. WANG F, QI B, CHEN Q H, et al. Properties of Cu-Al2O3 composite coating in supersonic cold gas dynamic spraying[J]. Materials Review,2009,23(6):47-50.
[72] NA H, BAE G, SHIN S, et al. Advanced deposition characteristics of kinetic sprayed bronze/diamond composite by tailoring feedstock properties[J]. Compos Sci Technol,2009,69(3-4):463-468.
[73] ZHOU X, MOHANTY P. Electrochemical behavior of cold sprayed hydroxyapatite/titanium composite in Hanks’ solution[J]. Electrochim Acta,2012,65:134-140.
[74] MORIMOTO J, ONODA T, SASAKI Y, et al. Improvement of solid cold sprayed TiO2-Zn coating with direct diode laser[J]. Vacuum,2004,73(3-4):527-532.
[75] CHERIGUI M, LI W, HAMZAOUI R, et al. Microstructure and magnetic properties of FeSiBNbCu-Al cold spray coatings[J]. Eur Phys J Appl Phys,2008,43(1):79-86.
[76] STEENKISTE T V. Kinetic sprayed rare earth iron alloy composite coatings[J]. J Therm Spray Techn,2006,15(4):501-506.
[77] DOSTA S, COUTO M, GUILEMANY J M. Cold spray deposition of a WC-25Co cermet onto Al7075-T6 and carbon steel substrates[J]. Acta Mater,2013,61(2):643-652.
[78] WATANABE M, KOMATSU M, KURODA S, et al. WC-Co/Al multilayer coatings by warm spray deposition[J]. J Therm Spray Techn,2012,21(3-4):597-60.
[79] YANDOUZI M, SANSOUCY E, AJDELSZTAJN L, et al. WC-based cermet coatings produced by cold gas dynamic and pulsed gas dynamic spraying processes[J]. Surf Coat Tech,2007,202(2):382-390.
[80] 陈利修, 陈铭冷. 冷喷涂Cu-Zn-Al2O3修复斯太尔发动机水道腐蚀区域的涂层性能分析[J]. 机械设计与研究,2013,29(1):69-74. CHE L X, CHEN M L. The coating performance of cold spraying Cu-Zn-Al2O3 for repairing the waterway corrosion area of Steyr engine[J]. Machine Design and Research,2013,29(1):69-74.
[81] 张建设. 美空军研究冷喷涂技术维修UH-60直升机[J]. 表面工程资讯,2012,(1):18. ZHANG J S. Studying of repairing UH-60 helicopter by cold spraying of Air Force research laboratory[J]. Information of Surface Engineering,2012,(1):18.
[1] 王宁, 李健, 关志军, 谭凯. 工艺参数对钼粉烧结体近等温包套锻造成形过程中应变的影响[J]. 材料工程, 2015, 43(6): 46-51.
[2] 王忻凯, 邢丽, 徐卫平, 黄春平, 刘奋成. 工艺参数对铝合金搅拌摩擦增材制造成形的影响[J]. 材料工程, 2015, 43(5): 8-12.
[3] 方宜武, 王显峰, 顾善群, 肖军. 自动铺丝过程中预浸料的侧向弯曲[J]. 材料工程, 2015, 43(4): 47-52.
[4] 石仲川, 张晓云, 陈昊, 丁方正, 宇波, 汤智慧, 陆峰. 高强钢冷喷涂铝锌复合涂层性能研究[J]. 材料工程, 2015, 43(2): 14-19.
[5] 郭学平, 李文亚, 廖汉林. 冷喷涂制备锡青铜/准晶复合涂层的微观结构及其摩擦学行为[J]. 材料工程, 2014, 0(4): 68-72,78.
[6] 张林伟, 王鲁, 王全胜, 宁先进. 真空预氧化对冷喷涂NiCoCrAlY涂层氧化行为的影响[J]. 材料工程, 2014, 0(1): 1-5,29.
[7] 黄春杰, 李文亚, 余敏, 廖汉林. 冷喷涂制备颗粒增强钛基复合材料涂层研究[J]. 材料工程, 2013, 0(4): 1-5,11.
[8] 张林伟, 王鲁, 王全胜, 宁先进. 真空预氧化对冷喷涂CoNiCrAlY涂层组织及热腐蚀性能的影响[J]. 材料工程, 2013, 0(4): 12-16.
[9] 李运刚, 田薇, 方秀君. 制备工艺参数对Cu表面Cu/Si梯度层断面显微组织的影响[J]. 材料工程, 2013, (2): 65-68,98.
[10] 王洪涛, 陈枭, 纪岗昌, 白小波, 董增祥, 仪登亮. 冷喷涂WC-Co涂层的组织结构和性能研究[J]. 材料工程, 2013, 0(10): 29-35.
[11] 刘君, 郭学锋, 张忠明, 叶永南. 工艺参数对AZ31镁合金往复挤压过程的影响[J]. 材料工程, 2012, 0(5): 70-75.
[12] 栗卓新, 祝弘滨, 李辉, 孙日超. 热喷涂金属陶瓷复合涂层研究进展[J]. 材料工程, 2012, 0(5): 93-98.
[13] 刘德鑫, 石仲川, 张晓云, 陆峰, 孙志华, 汤智慧. ZM6镁合金冷喷涂Al涂层结构与耐蚀性研究[J]. 材料工程, 2012, 0(12): 50-54,60.
[14] 郭明恩, 孙祖莉, 边文凤, 宋小然, 栾桂卿. 真空导入工艺参数对复合材料孔隙含量的影响[J]. 材料工程, 2012, 0(10): 54-57,62.
[15] 赵新宝, 刘林, 杨初斌, 张军, 李玉龙, 傅恒志. 镍基单晶高温合金凝固缺陷研究进展[J]. 材料工程, 2012, 0(1): 93-98.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn