Please wait a minute...
 
材料工程  2014, Vol. 0 Issue (4): 95-100    DOI: 10.3969/j.issn.1001-4381.2014.04.017
  综述 本期目录 | 过刊浏览 | 高级检索 |
聚合物纳米/亚微米结构零件注射成型的研究进展
周明勇1, 蒋炳炎1,2, 鲁立君1, 张露1, 陈磊1
1. 中南大学 高性能复杂制造国家重点实验室, 长沙 410083;
2. 中南大学 航空航天学院, 长沙 410083
Progress in Research on Polymer Nano/Sub-micro Structures by Injection Molding
ZHOU Ming-yong1, JIANG Bing-yan1,2, LU Li-jun1, ZHANG Lu1, CHEN Lei1
1. State Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha 410083, China;
2. School of Aeronautics and Astronautics, Central South University, Changsha 410083, China
全文: PDF(1451 KB)   HTML()
输出: BibTeX | EndNote (RIS)      
摘要 对近年来聚合物纳米/亚微米结构零件注射成型的研究进展进行综述,着重阐述成型材料、模芯材料和成型工艺对纳米/亚微米结构成型复制质量的影响,以及纳注射成型过程中的辅助成型技术和模芯制造方法。在此基础上,提出了纳注射成型技术中存在的问题,并对其发展进行展望。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
周明勇
蒋炳炎
鲁立君
张露
陈磊
关键词 纳米/亚微米结构纳注射成型聚合物复制质量    
Abstract:The recent research development on polymer nano/sub-micro structures by injection molding was reviewed. The influences of such conditions as processing materials, mold materials and the molding process on the replication quality of nano/sub-micro structures were analyzed in detail. In addition, the manufacturing technology of mold inserts and aided techniques were also discussed. Finally, the issues in the nano injection molding and forecast to the future developments of this research field were investigated.
Key wordsnano/sub-micro structure    nano injection molding    polymer    replication quality
收稿日期: 2013-04-11      出版日期: 2014-04-20
中图分类号:  TQ320.66  
基金资助:国家自然科学基金重大研究计划培育项目资助(91123012);973计划资助项目(2012CB025905);湖南省博士研究生科研创新项目资助(CX2011B091)
通讯作者: 蒋炳炎(1963- ),男,教授,博士生导师,主要研究方向:微注射成型,聚合物加工,复合材料成型等技术,联系地址:湖南省长沙市岳麓区麓山南路中南大学新校区中铝科技大楼A401室(410083),E-mail:jby@csu.edu.cn     E-mail: jby@csu.edu.cn
作者简介: 周明勇(1989- ),男,博士研究生,研究方向:微纳注射成型技术,联系地址:湖南省长沙市岳麓区麓山南路中南大学新校区中铝科技大楼C408室(410083),E-mail:zmy_csu@163.com
引用本文:   
周明勇, 蒋炳炎, 鲁立君, 张露, 陈磊. 聚合物纳米/亚微米结构零件注射成型的研究进展[J]. 材料工程, 2014, 0(4): 95-100.
ZHOU Ming-yong, JIANG Bing-yan, LU Li-jun, ZHANG Lu, CHEN Lei. Progress in Research on Polymer Nano/Sub-micro Structures by Injection Molding. Journal of Materials Engineering, 2014, 0(4): 95-100.
链接本文:  
http://jme.biam.ac.cn/CN/10.3969/j.issn.1001-4381.2014.04.017      或      http://jme.biam.ac.cn/CN/Y2014/V0/I4/95
[1] 唐天同, 王兆宏. 微纳加工科学原理[M].北京:电子工业出版社,2010.207-276.
[2] GATES B D, XU Q, STEWART M. New approaches to nanofabrication molding, printing, and other[J]. Chemical Reviews, 2005,105(4):1171-1196.
[3] 刘方辉, 钱心远, 张杰. 注塑成型新技术的发展概况[J]. 塑料科技,2009,37(3):83-88.LIU F H, QIAN X Y, ZHANG J. Development situation of the new technology of injection molding[J]. Plastics Science and Technology,2009,37(3):83-88.
[4] 姜爱菊, 吴宏武. 微注射成型技术的最新进展[J]. 塑料工业, 2008,36(8):1-4.JIANG A J, WU H W. Recent advance in micro injection molding technology[J]. China Plastics Industry,2008,36(8):1-4.
[5] 庄俭, 于同敏, 王敏杰. 微注塑成形中熔体充模流动分析及其数值模拟[J]. 机械工程学报,2008,44(9):43-49.ZHUANG J, YU T M, WANG M J. Analysis and numerical simulation of polymer melt filling in micro injection molding[J]. Chinese Journal of Mechanical Engineering,2008,44(9):43-49.
[6] KARI M, JONI H, PERTTI P, et al. Replication of sub-micron features using amorphous thermoplastics[J]. Polymer Engineering & Science,2004,42(7):1600-1608.
[7] 蒋炳炎, 蓝才红, 汤美林. 微结构特征对微结构零件注射成型流场均匀性的影响[J]. 高分子材料科学与工程,2008,24(8):9-12.JIANG B Y, LAN C H, TANG M L. Effects of micro structure characters on field uniformity of injection molded parts with micro structures[J]. Polymer Materials Science and Engineering, 2008,24(8):9-12.
[8] MACINTYRE D, THOMS S. The fabrication of high resolution features by mould injection[J]. Microelectronic Engineering, 1998,41-42:211-214.
[9] SCHIFT H, DAVID C, GABRIEL M, et al. Nanoreplication in polymers using hot embossing and injection molding[J].Microelectronic Engineering,2000,53(1):171-174.
[10] 王唯讚. 以分子動力學模擬奈米尺度下射出成型之充填過程. 新竹:国立清华大学,2006.
[11] TOFTEBERG T R, ANDREASSEN E. Multiscale simulation of injection molding of parts with low aspect ratio microfeatures[J]. International Polymer Processing,2010,25(1):63-75.
[12] KISARAGI Y. Molecular dynamics simulation of injection of polyethylene fluid in a variable cross-section nano-channel[J]. Chinese Science Bulletin,2011,17(56):1848-1856.
[13] 楚纯朋, 蒋炳炎, 刘瑶, 等. 聚合物微流控芯片微通道复制成型技术[J]. 塑料工业,2008,36(10):1-5. CHU C P, JIANG B Y, LIU Y, et al. Replication technology of micro-channel of polymer microfludic chips[J]. China Plastics Industry,2008,36(10):1-5.
[14] TSAO C W, DEVOE D L. Bonding of thermoplastic polymer microfluidics[J]. Microfluidics and Nanofluidics,2009,6(1):1-16.
[15] HUANG C K. Rapid replication of nanostructures made with a polymer using simple injection molding[J]. Journal of Applied Polymer Science,2008,107(1):497-500.
[16] LIOU A C, CHEN R H. Injection molding of polymer micro-and sub-micron structures with high-aspect ratios[J]. The International Journal of Advanced Manufacturing Technology,2006,28(11):1097-1103.
[17] YOON S, SRIROJPINYO C, LEE J, et al. Investigation of tooling surfaces on injection molded nanoscale features[J]. NSTI Nanotechnology,2004,3:460-463.
[18] BRUCK R, HAINBERGER R, HEER R, et al. Direct replication of nanostructures from silicon wafers in polymethylpentene by injection molding[A].DAVID H K, WILLIAM S B. Conference on Polymer Optics Design, Fabrication and Materials[C]. San Diego:International Society for Optics and Photonics, 2010.
[19] 晋星星. 基于PMMA模具的聚合物纳米沟道热压成形[D].大连:大连理工大学,2012.
[20] MATSCHUK M, LARSEN N B. Injection molding of high aspect ratio sub-100nm nanostructures[J]. Journal of Micromechanics and Microengineering,2013,23(2):1-11.
[21] LIN H Y, CHANG C H, YOUNG W B. Experimental and analytical study on filling of nano structures in micro injection molding[J]. International Communications in Heat and Mass Transfer,2010,37(10):1477-1486.
[22] HATTORI S, NAGATO K, HAMAGUCHI T, et al. Rapid injection molding of high-aspect-ratio nanostructures[J]. Microelectronic Engineering,2010,87(5):1546-1549.
[23] STORMONTH-DARLING J M, GADEGAARD N. Injection moulding difficult nanopatterns with hybrid polymer inlays[J]. Macromolecular Materials and Engineering,2012,37(10):1075-1080.
[24] GADEGAARD N,GREAME HERLIHY. Injection moulding nanostructures for medical applications[EB/OL][2014-01-21],http://www.spra.org.uk/news/201202/injection-moulding-nanostructures-medical-applications.
[25] TELFORD M. The case for bulk metallic glass[J]. Materials Today,2004,(3):36-43.
[26] KUMAR G, TANG H X, SCHROERS J. Nanomoulding with amorphous metals[J]. Nature,2009,457(7231):868-872.
[27] ZHANG N, BYRNE C J, BROWNE D J, et al. Towards nano-injection molding[J]. Materials Today,2012,15(5):216-221.
[28] 袁巨龙, 张飞虎, 戴一帆, 等. 超精密加工领域科学技术发展研究[J]. 机械工程学报,2010,46(15):161-177. YUAN J L,ZHANG F H, DAI Y F, et al. Development research of science and technologies in ultra-precision machining field[J]. Chinese Journal of Mechanical Engineering,2010,46(15):161-177.
[29] 于同敏, 宫德海. 微型模具制造技术研究与发展[J]. 中国机械工程,2005,16(2):87-91. YU T M, GONG D H. Research and development of micromold manufacture technology[J]. China Mechanical Engineering, 2005,16(2):87-91.
[30] CHEN K, CHEN C D, MA K J. Electron beam lithography in nanoscale fabrication: recent development[J]. Electronics Packaging Manufacturing,2003,26(2):141-149.
[31] VIEU C, CARCENAC F A P. Electron beam lithography resolution limits and applications[J]. Applied Surface Science,2000,164(1-4):111-117.
[32] PRANOV H, RASMUSSEN H K, LARSEN N B, et al. On the injection molding of nanostructured polymer surfaces[J]. Polymer Engineering & Science,2006,46(2):160-171.
[33] MIKKELSEN M B, LETAILLEUR A A, SONDERGARD E, et al. All-silica nanofluidic devices for DNA-analysis fabricated by imprint of sol-gel silica with silicon stamp[J]. Lab on a Chip, 2012,12(2):262-267.
[34] LIU J, QIAO H, XU Z, et al. Fabrication of planar nanofluidic channels in thermoplastic polymers by O2 plasma etching[J]. Micro & Nano Letters,IET,2012,7(2):159-162.
[35] NAGATO K, HAMAGUCHI T, NAKAO M. Injection compression molding of high-aspect-ratio nanostructures[J]. Journal of Vacuum Science & Technology B:Microelectronics and Nanometer Structures,2011,29(6):6-10.
[36] SHAO P E, VAN KAN A, WANG L P, et al. Fabrication of enclosed nanochannels in poly(methylmethacrylate) using proton beam writing and thermal bonding[J]. Applied Physics Letters,2006,88(9):93515.
[37] ITO H, SUZUKI H, KAZAMA K, et al. Polymer structure and properties in micro-and nanomolding process[J]. Current Applied Physics, 2009,9(2):19-24.
[38] MATSCHUK M, BRUUS H, LARSEN N B. Nanostructures for all-polymer microfluidic systems[J]. Microelectronic Engineering,2010,87(5):1379-1382.
[39] UTKO P, PERSSON F, KRISTENSEN A, et al. Injection molded nanofluidic chips: fabrication method and functional tests using single-molecule DNA experiments[J]. Lab Chip, 2010,11(2):303-308.
[40] GADEGAARD N, MOSLER S, LARSEN N B. Biomimetic polymer nanostructures by injection molding[J]. Macromolecular Materials and Engineering,2003,288(1):76-83.
[1] 曾成均, 刘立武, 边文凤, 冷劲松, 刘彦菊. 激励响应复合材料的4D打印及其应用研究进展[J]. 材料工程, 2020, 48(8): 1-13.
[2] 陈振, 张增志, 丛中卉, 王立宁, 吴浩平. 开孔型聚合物发泡材料的研究及应用进展[J]. 材料工程, 2020, 48(3): 1-9.
[3] 蔡庄立, 赵伶玲, 虞兮凡, 陈超. 模拟聚乙烯块体相变和导热的粗粒化模型和势场建立[J]. 材料工程, 2020, 48(1): 34-40.
[4] 余煜玺, 韩滨. PDC-SiBCN陶瓷基无线无源温度传感器的性能[J]. 材料工程, 2020, 48(1): 121-127.
[5] 陈珂龙, 张桐, 崔溢, 王智勇. 超支化聚合物(HBPs)改性环氧树脂的研究进展[J]. 材料工程, 2019, 47(7): 11-18.
[6] 余煜玺, 夏范森, 黄奇凡. 石墨烯改性PDC-SiCNO陶瓷的制备及其介电性能[J]. 材料工程, 2019, 47(3): 8-14.
[7] 赵亮, 李晓霞, 郭宇翔, 马德跃. 聚苯胺及其伪装应用研究进展[J]. 材料工程, 2019, 47(3): 42-49.
[8] 闫智然, 艾轶博, 王祎旋, 王煜, 何峻, 王海成. FeCo/PPy纳米复合材料的合成及其电磁性能调控[J]. 材料工程, 2019, 47(3): 63-70.
[9] 马鹏飞, 王鑫, 李栋辉, 游峰, 江学良, 姚楚. 聚合物共混物增容技术及发展[J]. 材料工程, 2019, 47(2): 26-33.
[10] 鲁浩, 李楠, 王海波, 廖帮全, 姜亚明, 荆妙蕾, 徐志伟, 陈莉, 张兴祥. 碳纳米管复合材料的3D打印技术研究进展[J]. 材料工程, 2019, 47(11): 19-31.
[11] 寻之玉, 侯璞, 刘旸, 倪守朋, 霍鹏飞. 聚合物电解质在超级电容器中的研究进展[J]. 材料工程, 2019, 47(11): 71-83.
[12] 谭耀红, 刘呈坤, 毛雪, 刘佳. 压电式纳米发电机及其混合器件的研究进展[J]. 材料工程, 2019, 47(10): 10-21.
[13] 吴笑, 许博, 朱向东, 辛菲, 钱立军, 刘吉平. 催化阻燃聚合物的研究进展[J]. 材料工程, 2018, 46(9): 14-22.
[14] 蒋建军, 胡毅, 陈星, 王林文, 任恩毅, 高新宇, 邓国力. 形状记忆智能复合材料的发展与应用[J]. 材料工程, 2018, 46(8): 1-13.
[15] 许婧, 邢悦, 郝思嘉, 任志东, 杨程. 石墨烯/聚合物基复合材料3D打印成型研究进展[J]. 材料工程, 2018, 46(7): 1-11.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn