Progress in the Research on Rolling Formation of Magnesium Alloy Sheet
ZHANG Ding-fei1, DAI Qing-wei1, HU Yao-bo1, LAN Wei2, FANG Lin1
1. National Research Center for Magnesium Alloys, College of Materials Science and Engineering, Chongqing University, Chongqing 400030, China; 2. Chongqing University of Science and Technology, Chongqing 401331, China
Abstract：Magnesium alloy sheet plays an important role in the wrought magnesium alloy.However,the processes of rolling formation are unsatisfactory.The characteristics and process of rolling formation of magnesium alloy sheet are analyzed.The effects of different rolling ways,like asynchronous,equal channel angular cross and accumulative rolling,on microstructure and properties are also discussed.And adjusting the rolling process and selecting rolling ways to enhance magnesium alloy rolled formability are mainly demonstrated.Finally the problems,together with the future development of magnesium alloy sheet rolling process,are pointed out.
张丁非, 戴庆伟, 胡耀波, 兰伟, 方霖. 镁合金板材轧制成型的研究进展[J]. 材料工程, 2009, 0(10): 85-90.
ZHANG Ding-fei, DAI Qing-wei, HU Yao-bo, LAN Wei, FANG Lin. Progress in the Research on Rolling Formation of Magnesium Alloy Sheet. Journal of Materials Engineering, 2009, 0(10): 85-90.
[1] 汪凌云,黄光杰,陈林,等.镁合金板材轧制工艺及组织性能分析[J].稀有金属材料与工程,2007,26(5):910-914. [2] DELL-VALLE J A,PEREZ-PRADO M T,RUANO O A.Tex-ture evolution during large strain hot rolling of the AZ61 Mg alloy[J].Materials Science and Engineering A,2003,355(1-2):68-78. [3] KALIDINDI S R.Modeling anisotropic strain hardening and de-formation textures in low stacking fault energy fcc metals[J].In-ternational Journal of Plasticity,2001,17(6):837-860. [4] 李姗.AZ31变形镁合金板材轧制工艺、组织与性能[D].西安:西安建筑科技大学,2007. [5] 陈维平,陈宛德,詹美燕,等.轧制温度和变形量对AZ31镁合金板材组织和硬度的影响[J].特种铸造及有色合金,2007,27(5):338-341. [6] BARNETT M R,NAVEA M D,BETTLES C J.Deformation microstructures and textures of some cold rolled Mg alloys[J].Materials Science and Engineering A,2004,386(1-2):205-211. [7] 陈彬,林栋,曾小勤,等.AZ31镁合金大压下率轧制的研究[J].锻压技术,2006,(3):1-3. [8] 傅定发,许芳艳,夏伟军,等.退火工艺对轧制AZ31镁合金组织和性能的影响[J].湘潭大学自然科学学报,2005,27(4):57-61. [9] 程永奇,陈振华,夏伟军,等.退火处理对AZ31镁合金轧制板材组织与冲压性能的影响[J].有色金属,2006,58(1):5-9. [10] 张文玉,刘先兰,陈振华.轧制路径对AZ31镁合金薄板组织性能的影响[J].特种铸造及有色合金,2007,27(9):716-719. [11] 曲家惠,姚路明,王福.AZ31镁合金在不同轧制方式下的织构演变[J].轻合金加工技术,2008,36(8):29-32. [12] 张青来,胡永学,王粒粒,等.挤压后交叉轧制的镁合金薄板组织研究[J].热加工工艺,2007,36(9):1-5. [13] KoBAYASHI T,KOIKE J,YOSHIDA Y.et al.Grain size de-pendence of active slip systems in an AZ31 magnesium alloy[J].Journal of Japan Institute of Light Metals,2003,67(4):149-152. [14] KIM W J,CHUNG S W,CHUNG C S,et al.Superplasticity in thin magnesium alloy sheets and deformation mechanism maps for magnesium alloys at elevated temperatures[J].Acta Materi-alia,2001,49(16):3337-3345. [15] CHANG T C,WANG J Y.Grain refining of magnesium alloy AZ31 by rolling[J].Journal of Materials Processing Technolo-gy,2003,140:588-591. [16] GAO H,RAMALINGAM S C,BARBER G C,et al.Analysis of asymmetrical cold rolling with varying coefficients of friction[J].Journal of Materials Processing Technology,2002,124(1-2):178-182. [17] KIM S H,YOU B S,YIM C D,et al.Texture and microstruc-ture changes in asymmetrically hot rolled AZ31 magnesium alloy sheets[J].Materials Letters,2005,59(29-30);3876-3880. [18] WATANABE H,MUKAI T,ISHIKAwA K.Effect of tem-perature of differential speed rolling on room temperature me-chanical properties and texture in an AZ31 magnesium alloy[J].Journal of Materials Processing Technology,2007,182(1-3):644-647. [19] LEE S H,LEE D N.Analysis of deformation textures of asym-metrically rolled steel sheets[J].International Journal of Me-chanical Sciences,2001,43(9):1997-2015. [20] 张文玉,刘先兰,陈振华,等.异步轧制AZ31镁合金板材的组织和晶粒取向[J].机械工程材料,2007,31(12):19-23. [21] 曲家惠,张正贵,王福,等.AZ31镁合金室温异步轧制的织构演变[J].材料研究学报,2007,21(4):354-358. [22] 程永奇,陈振华,夏伟军,等.等径角轧制AZ31镁合金板材的组织与性能[J].中国有色金属学报,2005,15(9):1369-1375. [23] CHENG Y Q,CHEN Z H,XIA J W,et al.Effect of channel clearance on crystal orientation development in AZ3 1 magnesium alloy sheet produced by equal channel angular rolling[J].Jour-nal of Materials Processing Technology,2007,184:97-101. [24] PEREZ-PRADO M T.DEL VALLE,RUANO O A.Grain re-finement of Mg-AI-Zn alloys via accumulative roll bonding[J].Scripta Materialia,2004,51(11):1093-1097. [25] DEL VALLE J A,PEREZ-PRADO M T,RUANO O A.Accu-mulative roll bonding of a Mg based AZ61 alloy[J].Materials Science and Engineering A,2005,4 10:353-357. [26] 常量,曾小勤,丁文江.不同轧制方法制得镁合金板材的组织和织构特点[J].轻合金加工技术,2007,35(4):4-8. [27] YASUMASA C,KENSUKE S,AKIRA K,et al.Enhanced formability at elevated temperature of a cross-rolled magnesium alloy sheet[J].Materials Science and Engineering A,2006,441(1-2):349-356. [28] YASUMASA C,KENSUKE S,AKIARA K,et al.Microstruc-ture and press formability of a cross-rolled magnesium alloy sheet[J].Materials Letters,2007,61(7):1504-1506.
2009, Vol. 0 
