1 Institute for Special Steels, Central Iron and Steel Research Institute, Beijing 100081, China 2 Tianjin Heavy Industries Research & Development Co., Ltd., Tianjin 300457, China
The isothermal deformation behavior of Ni-Cr-Mo low alloy SA508Gr.4N steel at deformation temperature of 850-1200 ℃, strain rate of 0.001-1 s-1, and true strain of 0.9 was studied by using Gleeble-1500D thermal simulation testing machine.The physically based flow stress model including dynamic recovery and dynamic recrystallization and the dynamic recrystallization grain size model were established, and the suitable forging process to avoid the coarse grain structure heredities was put forward.The results show that as the deformation temperature increases and the strain rate decreases, the dynamic recrystallization volume fraction and grain size gradually increase; the true stress-true strain curve of SA508Gr.4N steel has an obvious discontinuous dynamic recrystallization phenomenon; by comparing the experimental value with the predicted value of the model, the correlation coefficient (R) and mean relative error (MRE) of the flow stress model are 0.998 and 4.76%, respectively, and the correlation coefficient (R) and mean relative error (MRE) of the dynamic recrystallization grain size model are 0.991 and 8.69%, respectively. The two models have high accuracy.
WANG M H , WANG G T , WANG R , et al. Hot deformation and processing map of Mn-Ni-Mo system nuclear power steel[J]. Journal of Central South University (Science and Technology), 2017, 48 (3): 592- 600.
2
DONG D Q , CHEN F , CUI Z S . A physically-based constitutive model for SA508-Ⅲ steel: modeling and experimental verification[J]. Materials Science and Engineering: A, 2015, 634, 103- 115.
doi: 10.1016/j.msea.2015.03.036
3
LI L X , ZHENG L Y , YE B , et al. Metadynamic and static recrystallization softening behavior of a bainite steel[J]. Metals and Materials International, 2018, 24 (1): 60- 66.
doi: 10.1007/s12540-017-7201-z
4
DONG D Q , CHEN F , CUI Z S . Investigation on metadynamic recrystallization behavior in SA508-Ⅲ steel during hot deformation[J]. Journal of Manufacturing Processes, 2017, 29, 18- 28.
doi: 10.1016/j.jmapro.2017.07.008
5
ZHOU P , MA Q X . Static recrystallization behavior of 25CrMo4 mirror plate steel during two-pass hot deformation[J]. Journal of Iron and Steel Research, International, 2017, 24 (2): 222- 228.
doi: 10.1016/S1006-706X(17)30031-6
ZHANG S Q , FENG D , ZHANG Y , et al. Hot deformation behavior and constitutive model of advanced ultra-high strength hot stamping steel[J]. Journal of Materials Engineering, 2016, 44 (5): 15- 21.
doi: 10.3969/j.issn.1673-1433.2016.05.004
8
SUI D S , WANG T , ZHU L L , et al. Mathematical modeling of high-temperature constitutive equations and hot processing maps for as-cast SA508-3 steel[J]. Journal of Metals, 2016, 68 (11): 2944- 2951.
doi: 10.1007/s11837-016-2074-z
LIU N , LIU Z D , HE X K , et al. Structure inheritance removing of SA508Gr.4N steel for nuclear reactor pressure vessels[J]. Journal of Iron and Steel Research, 2017, 29 (5): 402- 410.
10
YANG Z Q , LIU Z D , HE X K , et al. Effect of microstructure on the impact toughness and temper embrittlement of SA508Gr.4N steel for advanced pressure vessel materials[J]. Scientific Reports, 2018, 8 (1): 207- 218.
doi: 10.1038/s41598-017-18434-3
11
PARK S G , KIM M C , LEE B S , et al. Correlation of the thermodynamic calculation and the experimental observation of Ni-Mo-Cr low alloy steel changing Ni, Mo, and Cr contents[J]. Journal of Nuclear Materials, 2010, 407 (2): 126- 135.
doi: 10.1016/j.jnucmat.2010.09.004
12
TAKU S , ANDREY B , RUSTAM K , et al. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions[J]. Progress in Materials Science, 2014, 60, 130- 207.
doi: 10.1016/j.pmatsci.2013.09.002
13
WU C , HAN S . Hot deformation behavior and dynamic recrystallization characteristics in a low-alloy high-strength Ni-Cr-Mo-V steel[J]. Acta Metallurgica Sinica, 2018, 31, 963- 974.
ZHU H C , LUO J M , ZHU Z S . Dynamic recrystallization behavior and transformation mechanism in β-phase region of TB17 titanium alloy[J]. Journal of Materials Engineering, 2020, 48 (2): 108- 113.
15
XU Y K , BIRNBAUM P , PILZ S , et al. Investigation of constitutive relationship and dynamic recrystallization behavior of 22MnB5 during hot deformation[J]. Results in Physics, 2019, 14, 102426.
doi: 10.1016/j.rinp.2019.102426
16
HAN Y , YAN S , YIN B G , et al. Effects of temperature and strain rate on the dynamic recrystallization of a medium-high-carbon high-silicon bainitic steel during hot deformation[J]. Vacuum, 2018, 148, 78- 87.
doi: 10.1016/j.vacuum.2017.11.007
BAO X R , WANG J A , WANG X D , et al. Dynamic recrystallization behavior of Cr-Mo-Ni bainitic steel[J]. Transactions of Materials and Heat Treatment, 2016, 37 (4): 222- 227.
18
CHEN X M , LIN Y C , WEN D X , et al. Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation[J]. Materials & Design, 2014, 57, 568- 577.
19
DING R , GUO Z X . Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization[J]. Acta Materialia, 2001, 49 (16): 3163- 3175.
doi: 10.1016/S1359-6454(01)00233-6
20
CHEN G J , CHEN L , ZHAO G Q , et al. Microstructure analysis of an Al-Zn-Mg alloy during porthole die extrusion based on modeling of constitutive equation and dynamic recrystallization[J]. Journal of Alloys and Compounds, 2017, 710, 80- 91.
doi: 10.1016/j.jallcom.2017.03.240
YANG Z Q , LIU Z D , HE X K , et al. Hot deformation behavior of SA508Gr.4N steel for reactor pressure vessels[J]. Journal of Materials Engineering, 2017, 45 (8): 88- 95.
22
POLIAK E I , JONAS J J . A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization[J]. Acta Materialia, 1996, 44 (1): 127- 136.
doi: 10.1016/1359-6454(95)00146-7
23
LIU N , LIU Z D , HE X K , et al. Hot deformation behavior of SA508Gr.4N steel for nuclear reactor pressure vessels[J]. Journal of Iron and Steel Research, International, 2016, 23 (12): 1342- 1348.
doi: 10.1016/S1006-706X(16)30197-2
YANG X Y , HE A , XIE G L , et al. Dynamic recrystallization behavior of an austenitic stainless steel for nuclear power plants[J]. Chinese Journal of Engineering, 2015, 37 (11): 1447- 1455.