Please wait a minute...
 
材料工程  2017, Vol. 45 Issue (11): 115-121    DOI: 10.11868/j.issn.1001-4381.2016.001381
  研究论文 本期目录 | 过刊浏览 | 高级检索 |
Y2O3对W-4.9Ni-2.1Fe合金摩擦磨损行为的影响
张雪辉, 周亮亮, 李晓闲, 张陈增, 王成, 章标, 陈颢, 梁彤祥
江西理工大学 材料科学与工程学院, 江西 赣州 341000
Effect of Y2O3 on Friction and Wear Behavior of W-4.9Ni-2.1Fe Alloy
ZHANG Xue-hui, ZHOU Liang-liang, LI Xiao-xian, ZHANG Chen-zeng, WANG Cheng, ZHANG Biao, CHEN Hao, LIANG Tong-xiang
School of Materials Science and Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, Jiangxi, China
全文: PDF(7257 KB)   HTML()
输出: BibTeX | EndNote (RIS)      
摘要 采用高能球磨和放电等离子体烧结技术联合制备W-4.9Ni-2.1Fe-xY2O3高密度合金,利用洛氏硬度计、X射线衍射仪、往复式摩擦磨损试验机、三维轮廓仪等对合金的显微组织、力学性能和摩擦磨损行为进行研究。结果表明:适量稀土氧化物Y2O3掺杂,可以有效抑制烧结过程中晶粒的长大,使黏结相和钨颗粒均匀分布,提高合金的相对密度、硬度及摩擦磨损性能。当过量添加Y2O3时,Y2O3易于在晶界处偏聚,抑制晶粒长大效果减弱,合金的力学性能和摩擦性能均出现不同程度的下降;因此,Y2O3添加应适量,而当其添加量为0.4%(质量分数)时,合金综合性能最优。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
张雪辉
周亮亮
李晓闲
张陈增
王成
章标
陈颢
梁彤祥
关键词 Y2O3高密度合金放电等离子体烧结摩擦磨损力学性能    
Abstract:The W-4.9Ni-2.1Fe alloy with different addition of Y2O3 was prepared by high energy ball milling and spark plasma sintering techniques, the microstructure, mechanical property, friction and wear behavior of the high density alloy were investigated by the Rockwell hardness tester, X-ray diffractometer, reciprocating friction and wear tester, 3D profiler, etc. The results show that adequate doping of the trace Y2O3 can effectively inhibit the grain size, promote the γ-(Ni,Fe) bonding phase and tungsten particles uniformly distribute, increase the relative density, hardness, friction and wear properties. But the excessive Y2O3 addition can easily aggregate at grain boundary, weaken the inhibition effect, and decrease the mechanical and wear properties of the alloy. So the addition of Y2O3 should be appropriate. When the adding mass fraction of Y2O3 particles is 0.4%, the comprehensive performance of the alloy is the best.
Key wordsY2O3    high density alloy    spark plasma sintering    friction and wear    mechanical property
收稿日期: 2016-11-23      出版日期: 2017-11-18
中图分类号:  TG146.4  
通讯作者: 梁彤祥(1966-),男,博士,教授,研究方向:碳素材料、石墨材料及金属基复合材料,联系地址:江西省赣州市章贡区客家大道156号江西理工大学材料科学与工程学院(341000),E-mail:liang_tx@126.com     E-mail: liang_tx@126.com
引用本文:   
张雪辉, 周亮亮, 李晓闲, 张陈增, 王成, 章标, 陈颢, 梁彤祥. Y2O3对W-4.9Ni-2.1Fe合金摩擦磨损行为的影响[J]. 材料工程, 2017, 45(11): 115-121.
ZHANG Xue-hui, ZHOU Liang-liang, LI Xiao-xian, ZHANG Chen-zeng, WANG Cheng, ZHANG Biao, CHEN Hao, LIANG Tong-xiang. Effect of Y2O3 on Friction and Wear Behavior of W-4.9Ni-2.1Fe Alloy. Journal of Materials Engineering, 2017, 45(11): 115-121.
链接本文:  
http://jme.biam.ac.cn/CN/10.11868/j.issn.1001-4381.2016.001381      或      http://jme.biam.ac.cn/CN/Y2017/V45/I11/115
[1] 刘晓俊,任会兰,宁建国.不同配比W/Zr活性材料冲击反应实验研究[J].材料工程,2017,45(4):77-83. LIU X J,REN H L,NING J G.Experimental study on impact response of W/Zr reactive materials with different proportions[J].Journal of Materials Engineering,2017,45(4):77-83.
[2] 张雪辉,章标,朱太恒,等.W-4.9Ni-2.1Fe高比重合金的摩擦磨损行为[J].有色金属科学与工程,2016,7(4):33-39. ZHANG X H,ZHANG B,ZHU T H,et al.Frictional wear behavior of tungsten heavy alloys 93W-4.9Ni-2.1Fe[J].Nonferrous Metals Science and Engineering,2016,7(4):33-39.
[3] 赵慕岳,范景莲,刘涛,等.中国钨加工业的现状与发展趋势[J].中国钨业,2010,25(2):26-30. ZHAO M Y,FAN J L,LIU T,et al.Current situation and development trend of China tungsten processing industry[J]. China Tungsten Industry,2010,25(2):26-30.
[4] HU K,LI X Q,QU S G,et al.Spark-plasma sintering of W-5.6Ni-1.4Fe heavy alloys:densification and grain growth[J].Metallurgical and Materials Transactions A,2013,44(2):923-933.
[5] SENTHILNATHAN N, ANNAMALAI A R, VENKATACHALAM G. Sintering of tungsten and tungsten heavy alloys of W-Ni-Fe and W-Ni-Cu:a review[J]. Transactions of the Indian Institute of Metals, 2017, 70(50):1161-1176.
[6] 沈宏芳,陈文革,谷臣清.纳米W-Ni-Fe高比重合金的研究[J].稀有金属,2005,29(2):133-137. SHEN H F,CHEN W G,GU C Q.Nanostructured W-Ni-Fe heavy gravity alloy[J].Chinese Journal of Rare Metals,2005,29(2):133-137.
[7] LU W R,GAO C Y,KE Y L.Constitutive modeling of two-phase metallic composites with application to tungsten-based composite 93W-4.9Ni-2.1Fe[J].Materials Science and Engineering:A,2014,592:136-142.
[8] XIANG D P,DING L,LI Y Y,et al.Fabricating fine-grained tungsten heavy alloy by spark plasma sintering of low-energy ball-milled W-2Mo-7Ni-3Fe powders[J].Materials Science and Engineering:A,2013,578:18-23.
[9] 张雪辉,李晓闲,章标,等.稀土改性高密度W-Ni-Fe合金的研究现状及发展趋势[J].功能材料,2016,47(增刊1):66-71. ZHANG X H,LI X X,ZHANG B,et al.Current status and development trend on rare earth modified W-Ni-Fe heavy alloys[J].Journal of Functional Materials,2016,47(Suppl 1):66-71.
[10] 蔡立辉,刘桂荣,曹靖.高能球磨对WNiFe合金力学性能影响的初步探讨[J].粉末冶金工业,2005,15(3):15-18. CAI L H,LIU G R,CAO J.Preliminary study for effect of high energy ball milling on mechanical properties of tungsten heavy alloy[J].Powder Metallurgy Industry,2005,15(3):15-18.
[11] 向道平,丁雷.合金元素或氧化物强化W-Ni-Fe高密度合金的研究进展[J].中国有色金属学报,2013,23(6):1549-1559. XIANG D P,DING L.Research progress of alloying elements or oxides strengthened W-Ni-Fe heavy alloys[J].The Chinese Journal of Nonferrous Metals,2013,23(6):1549-1559.
[12] 曾毅,范景莲,李勇明,等.微量稀土La对细晶W-Ni-Fe合金显微组织和性能的影响[J].粉末冶金技术,2010,28(6):403-406. ZENG Y,FAN J L,LI Y M, et al.Influence of trace La on microstructure and properties of fine-grained W-Ni-Fe alloys[J].Powder Metallurgy Technology,2010,28(6):403-406.
[13] 马运柱,张佳佳,刘文胜,等.真空热处理对微波烧结93W-Ni-Fe合金显微组织及力学性能的影响[J].稀有金属材料与工程,2012,41(9):1680-1683. MA Y Z,ZHANG J J,LIU W S,et al.Effects of vacuum heat treatment on microstructure and mechanical properties of 93W-Ni-Fe alloy by microwave sintering[J].Rare Metal Materials and Engineering,2012,41(9):1680-1683.
[14] 晏建武,周继承,鲁世强,等.热处理对W-Ni-Fe高密度合金组织与性能影响[J].国外金属加工,2005,26(4):43-49. YAN J W,ZHOU J C,LU S Q,et al.Influence of thermal process on the microstructure and properties of W-Ni-Fe high density alloy[J].Journal of International Metal Working,2005,26(4):43-49.
[15] 刘卫强,岳明,姜涛,等.放电等离子烧结W-Ni-Fe合金的显微组织与性能研究[J].功能材料,2004,35(增刊1):3019-3021. LIU W Q,YUE M,JIANG T,et al.The microstructure of W-Ni-Fe alloy prepared by spark plasma sintering[J].Journal of Functional Materials,2004,35(Suppl 1):3019-3021.
[16] RAGHUNATHAN S,BOURELL D L.Synthesis and evaluation of advanced nanocrystalline tungsten-based materials[J].Powder Metallurgy Science and Technology,1999,1:9-14.
[17] 逯庆国,李明利,周宇松,等. W-Ni-Fe系纳米复合粉体的制备工艺研究[J]. 兵器材料科学与工程, 2011,34(2):90-93. LU Q G, LI M L, ZHOU Y S, et al. Preparation process of W-Ni-Fe nano powders[J]. Ordnance Material Science and Engineering, 2011,34(2):90-93.
[18] FAN J L,HUANG B Y,QU X H.W-Ni-Fe nanostructure materials synthesized by high energy ball milling[J].Transactions of Nonferrous Metals Society of China,2000,10(1):57-59.
[19] WHITE G D,GURWELL W E.Freeze-dried tungsten heavy alloys[J].Advances in Powder Metallurgy,1989,6(1):355-368.
[20] 祁美贵,范景莲,张骁,等.微量Y2O3对细晶W-Ni-Fe粉末烧结行为和显微组织的影响[J].中国有色金属学报,2009,19(4):656-661. QI M G,FAN J L,ZHANG X,et al.Influence of trace Y2O3 on sintering behavior and microstructure of fine-grain W-Ni-Fe powders[J].The Chinese Journal of Nonferrous Metals,2009,19(4):656-661.
[21] RYU H J,HONG S H.Fabrication and properties of mechanically alloyed oxide-dispersed tungsten heavy alloys[J].Materials Science and Engineering:A,2003,363(1/2):179-184.
[22] 彭石高,范景莲,刘涛,等.稀土含量和还原温度对制备超细(W, Ni, Fe)复合粉末的影响[J].粉末冶金技术,2009,27(1):36-39. PENG S G,FAN J L,LIU T,et al.Effects of rare earth content and reduction temperature on preparation of superfine (W,Ni,Fe) composite powder[J].Powder Metallurgy Technology,2009,27(1):36-39.
[23] FAN J L,LIU T,CHENG H C,et al.Preparation of fine grain tungsten heavy alloy with high properties by mechanical alloying and yttrium oxide addition[J].Journal of Materials Processing Technology,2008,208(1/3):463-469.
[24] ZAFARI A,GHASEMI H M,MAHMUDI R.Effect of rare earth elements addition on the tribological behavior of AZ91D magnesium alloy at elevated temperatures[J].Wear,2013,303(1/2):98-108.
[25] 马国亮,田伟,王铀.纳米稀土氧化物对7075铝合金硬度和耐磨性的影响[J].材料热处理学报,2007,28(增刊):79-81. MA G L,TIAN W,WANG Y.Influence of nanosized rare earth oxide dopant on hardness and wear resistance of 7075 aluminum alloy[J].Transactions of Materials and Heat Treatment,2007,28(Suppl):79-81.
[26] HE Y J,WINNUBST L,BURGGRAAF A J,et al.Grain-size dependence of sliding wear in tetragonal zirconia polycrystals[J].Journal of the American Ceramic Society,1996,79(12):3090-3096.
[27] ZUM G K H,BUNDSCHUH W,ZIMMERLIN B.Effect of grain size on friction and sliding wear of oxide ceramics[J].Wear,1993,162/164:269-279.
[1] 杨旭东, 安涛, 邹田春, 巩天琛. 湿热环境对碳纤维增强树脂基复合材料力学性能的影响及其损伤机理[J]. 材料工程, 2019, 47(7): 84-91.
[2] 王聃, 陶德华, 黄秀玲, 华子恺. 聚甲基丙稀酸羟乙酯甘油凝胶仿软骨材料的制备与性能[J]. 材料工程, 2019, 47(7): 71-75.
[3] 马明星, 王志新, 梁存, 周家臣, 张德良, 朱达川. CeO2掺杂对AlCoCrCuFe高熵合金的组织结构与摩擦磨损性能的影响[J]. 材料工程, 2019, 47(7): 106-111.
[4] 刘文祎, 徐聪, 刘茂文, 肖文龙, 马朝利. 稀土元素Gd对Al-Si-Mg铸造合金微观组织和力学性能的影响[J]. 材料工程, 2019, 47(6): 129-135.
[5] 王飞云, 金建军, 江志华, 王晓震, 胡春文. 热处理温度对新型马氏体时效不锈钢微观组织和性能的影响[J]. 材料工程, 2019, 47(6): 152-160.
[6] 陈海龙, 杨学锋, 王守仁, 鹿重阳, 吴元博. 改性酚醛树脂陶瓷摩擦材料的摩擦磨损性能[J]. 材料工程, 2019, 47(6): 108-113.
[7] 闫钊鸣, 张治民, 杜玥, 张冠世, 任璐英. 均匀化处理对Mg-13Gd-3.5Y-2Zn-0.5Zr镁合金组织和力学性能的影响[J]. 材料工程, 2019, 47(5): 93-99.
[8] 薛子明, 雷卫宁, 王云强, 钱海峰, 李奇林. 超临界条件下脉冲占空比对石墨烯复合镀层微观结构和性能的影响[J]. 材料工程, 2019, 47(5): 53-62.
[9] 王勇刚, 刘和剑, 回丽, 职山杰, 刘海青. 激光熔覆原位自生碳化物增强自润滑耐磨复合涂层的高温摩擦学性能[J]. 材料工程, 2019, 47(5): 72-78.
[10] 李惠, 肖文龙, 张艺镡, 马朝利. 多重结构Ti-B4C/Al2024复合材料的组织和力学性能[J]. 材料工程, 2019, 47(4): 152-159.
[11] 崔岩, 项俊帆, 曹雷刚, 杨越, 刘园. 碳化硅颗粒表面吸附质对铝基复合材料制备及力学性能的影响[J]. 材料工程, 2019, 47(4): 160-166.
[12] 李亚锋, 礼嵩明, 黑艳伟, 邢丽英, 陈祥宝. 太阳辐照对芳纶纤维及其复合材料性能的影响[J]. 材料工程, 2019, 47(4): 39-46.
[13] 赵双赞, 燕绍九, 陈翔, 洪起虎, 李秀辉, 戴圣龙. 石墨烯纳米片增强铝基复合材料的动态力学行为[J]. 材料工程, 2019, 47(3): 23-29.
[14] 李灿, 陈文琳, 雷远. 微量Sr及均匀化工艺对Al-Mg-Si-Cu-Mn变形铝合金铸态组织与性能的影响[J]. 材料工程, 2019, 47(2): 90-98.
[15] 李秀辉, 燕绍九, 洪起虎, 赵双赞, 陈翔. 石墨烯添加量对铜基复合材料性能的影响[J]. 材料工程, 2019, 47(1): 11-17.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn