Please wait a minute...
 
材料工程  2014, Vol. 0 Issue (8): 15-20    DOI: 10.11868/j.issn.1001-4381.2014.08.003
  材料与工艺 本期目录 | 过刊浏览 | 高级检索 |
强流脉冲电子束表面处理对TiAlN涂层刀具的组织结构及性能的影响
娄长胜, 芦馨, 金光, 高景龙, 张罡
沈阳理工大学 材料科学与工程学院, 沈阳 110159
Influences of High Current Pulsed Electron Beam Treatment on Microstructure and Performance of TiAlN Coated Cutting Tools
LOU Chang-sheng, LU Xin, JIN Guang, GAO Jing-long, ZHANG Gang
School of Materials Science and Engineering, Shenyang Ligong University, Shenyang 110159, China
全文: PDF(2780 KB)   HTML()
输出: BibTeX | EndNote (RIS)      
摘要 采用强流脉冲电子束表面改性技术对TiAlN涂层刀具表面进行轰击处理。利用扫描电镜、X射线衍射仪研究轰击次数对TiAlN涂层刀具表面形貌、涂层厚度及物相组成的影响,检测TiAlN涂层的显微硬度和粗糙度,并对轰击前后涂层刀具的切削性能进行分析。结果表明:随着轰击次数的增加,涂层的厚度减小,涂层表面在微区范围内更致密、光滑,显微硬度则先小幅提高后急剧下降,而涂层的物相组成基本保持不变。与原始刀具的切削性能相比,轰击后的涂层刀具切削速率小幅提高,而刀具后刀面磨损有所下降。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
娄长胜
芦馨
金光
高景龙
张罡
关键词 强流脉冲电子束TiAlN涂层刀具力学性能切削性能    
Abstract:TiAlN coated cutting tools were irradiated by high current pulsed electron beam (HCPEB). The effects of pulsed numbers on the morphology, the thickness of coatings, and its phase composition were investigated with SEM, XRD method. Meanwhile, micro-hardness and roughness of cutting tools were measured. The cutting performances of untreated tools and treated tools were obtained through turning test. The results show that with the increasing pulse numbers,the thickness of coatings decreases, the surface manifests the characteristic of dense and smooth coatings in the micro regions, and its microhardness first increases and then decreases sharply. However, surface phase composition has no changed obviously. The cutting speed of treated tools increases, and the flank wear decreases compared with untreated one.
Key wordshigh current pulsed electron beam    TiAlN coated cutting tool    mechanical property    cutting performance
收稿日期: 2013-10-18     
1:  TG178  
  TG712  
基金资助:国家科技重大专项资助项目(2012ZX04003-061)
通讯作者: 娄长胜(1972-),男,副教授,现从事金属材料表面处理的研究工作,联系地址:辽宁省沈阳市浑南新区南屏中路6号沈阳理工大学材料科学与工程学院(110159),E-mail:chsh_lou@163.com     E-mail: chsh_lou@163.com
引用本文:   
娄长胜, 芦馨, 金光, 高景龙, 张罡. 强流脉冲电子束表面处理对TiAlN涂层刀具的组织结构及性能的影响[J]. 材料工程, 2014, 0(8): 15-20.
LOU Chang-sheng, LU Xin, JIN Guang, GAO Jing-long, ZHANG Gang. Influences of High Current Pulsed Electron Beam Treatment on Microstructure and Performance of TiAlN Coated Cutting Tools. Journal of Materials Engineering, 2014, 0(8): 15-20.
链接本文:  
http://jme.biam.ac.cn/jme/CN/10.11868/j.issn.1001-4381.2014.08.003      或      http://jme.biam.ac.cn/jme/CN/Y2014/V0/I8/15
[1] KANG M C, PARK I, KIM K H. Performance evaluation of AIP-TiAlN coated tool for high speed machining[J]. Surface and Coatings Technology,2003,163-164(30):734-738.
[2] 韩振威, 林有希. TiAlN涂层刀具研究新进展[J]. 组合机床与自动化加工技术,2012,(6):87-91.HAN Zhen-wei, LIN You-xi. Research progress of TiAlN coating tools[J]. Modular Machine Tool and Automatic Manufacturing Technique,2012,(6):87-91.
[3] 吴化, 陈涛, 宋力. PVD法制备 (Ti,Al)N 涂层中残余应力对其质量的影响[J]. 材料工程,2013,(2):62-64.WU Hua, CHEN Tao, SONG Li. Effect of residual stress on quality of (Ti, Al)N coatings deposited by PVD method[J]. Journal of Materials Engineering,2013,(2):62-64.
[4] IVANOV Y F, ROTSHIN V P, PROSKUROVSKY D I, et al. Pulsed electron beam treatment of WC-TiC-Co hard alloy cutting tools:wear resistance and micro-structural evolution[J]. Surface and Coatings Technology,1999,125(1-3):251-256.
[5] 秦颖, 吴爱民, 邹建新, 等. 强流脉冲电子束表面改性的物理模型及数值模拟[J]. 强激光与粒子束,2003,15(7):33-52. QIN Ying, WU Ai-min, ZOU Jian-xin, et al. Physical model and numerical simulation of intense pulsed electron beam surface modification[J]. High Power Laser and Particle Beams,2003,15(7):33-52.
[6] YOSHAKI D, WANG Zhi-gang, YAMAZAKI K, et al. Investigation of the formation and energy density of high pulsed electron beams[J]. Plasma Chemistry Plasma Process,2007,27(4):458-472.
[7] PROSKUROVSKY D, ROTSHTEIN V P, OZUR G E, et al. Physical foundations for surface treatment of materials with low energy high current electron beams[J]. Surface and Coatings Technology,2000,12(5):49-56.
[8] 赵晖, 易赟, 陈燕, 等. 强流脉冲电子束W18Cr4V高速钢表面处理[J]. 金属热处理,2011,36(5):68-71. ZHAO Hui, YI Yun, CHEN Yan, et al. Surface treatment of W18Cr4V high speed steel irradiated by high current pulsed electron beam[J]. Heat Treatment of Metals,2011,36(5):68-71.
[9] 宋振飞, 秦颖, 郝智胜, 等. 强流脉冲电子束热障涂层表面改性温度场数值模拟[J]. 真空科学与技术学报,2008,28(6):56-61.SONG Zhen-fei, QIN Ying, HAO Zhi-sheng, et al. Simulation of temperature field in surface modification of thermal barrier coating deposited by high current pulsed electron beam[J]. Chinese Journal of Vacuum Science and Technology,2008,28(6):56-61.
[10] ANTHOY J, PERRY J N, STEVE J, et al. The effect of rapid thermal processing (RTP) on TiN coatings deposited by PVD and the steel-turning performance of coated cemented carbide[J].Surface and Coatings Technology,1999,120-121:337-342.
[11] 史全富, 汪麟. 金属切削手册[M]. 上海:上海科学技术出版社,1998.164-168. SHI Quan-fu, WANG Lin. Metal Cutting Manual[M]. Shanghai: Shanghai Scientific and Technical Press,1998.164-168.
[12] 薛彦庆, 汪诚, 王学德, 等. 强流脉冲离子束辐照改善W9Cr4V轴承钢的表面性能[J].中国表面工程,2012,25(3):76-80. XUE Yan-qing, WANG Cheng, WANG Xue-de, et al. Surface modification of W9Cr4V air-bearing steel through high intense pulses ion beams irradiation[J]. China Surface Engineering,2012,25(3):76-80.
[13] 张锋刚, 朱小鹏, 王明阳, 等. 强流脉冲离子束辐照WC-Ni硬质密封材料表面改性研究[J]. 金属学报,2011,47(7):960-964. ZHANG Feng-gang, ZHU Xiao-peng, WANG Ming-yang, et al. Surface modification of WC-Ni cemented carbide for seals by high intensity pulsed ion beam irradiation[J]. Acta Metallurgica Sinica,2011,47(7):960-964.
[14] 吴爱民, 刘捍卫, 邹建新, 等. D2钢电子束表面改性抗微动磨损性能研究[J].核技术,2002,25(9):758-765. WU Ai-min, LIU Han-wei, ZOU Jian-xin, et al. High current pulsed electron beam modification on fretting wear behavior of D2 die steel[J]. Nuclear Techniques,2002,25(9):758-765.
[15] 曹辉, 苑克, 郝仪, 等. 纯镁和镁合金强流脉冲电子束表面合金化性能[J].中国表面工程,2011,28(1):27-30. CAO Hui, YUAN Ke, HAO Yi, et al. Modification and alloying of high purity magnesium surface with high current pulsed electron beam[J]. Chinese Journal of Vacuum Science and Technology,2011,28(1):27-30.
[16] SANTANA A E, KARIMI A, DERFLINGER V H, et al. Thermal treatment effects on microstructure and mechanical properties of TiAlN thin films[J]. Tribology Letters,2004,17(4):689-695.
[17] DAVI N, ANSELMO E D, MILTON S, et al. Micro-structural analyses and wear behavior of the cemented carbide tools after laser surface treatment and PVD coating[J].Applied Surface Science,2013,282(2003):680-688.
[18] ZHU X P, ZHANG F G, SONG T K, et al. Nonlinear wear response of WC-Ni cemented carbides irradiated by high intensity pulsed ion beam[J]. Journal of Tribology,2014,136:1-10.
[19] 周玉, 武高辉. 材料分析测试技术[M]. 哈尔滨:哈尔滨工业大学出版社, 2007.26-33. ZHOU Yu, WU Gao-hui. Analysis Methods in Materials Science[M]. Harbin: Harbin Institute of Technology Press,2007.26-33.
[20] 陈占兴, 张罡, 曲家惠, 等. 强流脉冲离子束辐照挤压态AZ31镁合金性能[J]. 金属热处理,2012,37(10):50-54. CHEN Zhan-xing, ZHANG Gang, QU Jia-hui, et al. Properties of extruded magnesium alloy AZ31 irradiated by high intensity pulsed ion beams[J]. Heat Treatment of Metals,2012,37(10):50-54.
[21] LE X Y, YAN S, LIU Z J, et al. Detection of shocks generated by intense pulsed ion beam irradiation[J]. Surface and Coatings Technology,2007,201(9-11):4991-4994.
[22] 黄自谦, 贺跃辉, 蔡海涛, 等. TiAlN涂层的热残余应力分析[J].中国有色金属学报,2007,17(6):898-902. HUANG Zi-qian, HE Yue-hui, CAI Hai-tao, et al. Thermal residual stress analysis of TiAlN coating[J]. The Chinese Journal of Nonferrous Metals,2007,17(6):898-902.
[23] 陈利, 吴恩熙, 尹飞, 等. (Ti, Al) N涂层的微观组织和性能[J]. 中国有色金属学报,2006,16(2):280-283. CHEN Li, WU En-xi, YIN Fei, et al. Microstructure and properties of (Ti,Al)N coating[J]. The Chinese Journal of Nonferrous Metals,2006,16(2):280-283.
[24] 徐建华, 王昕, 马胜利, 等. TiN纳米薄膜的高硬度及其产生机制[J]. 材料研究学报,2008,22(2):201-204. XU Jian-hua, WANG Xin, MA Sheng-li, et al. The mechanism of super hardness of nano crystallite TiN films deposited by pulsed d.c. bias multi-arc ion plating[J]. Chinese Journal of Materials Research,2008,22(2):201-204.
[25] VEPREK S, VEPREK M G J, KARVANKOVA P, et al. Different approaches to super hard coatings and nano composites[J].Thin Solid Films,2005,476(1):1-29.
[26] 李嫚, 张弘弢, 贾乾忠, 等. 影响涂层硬质合金刀具切削性能微观因素研究[J]. 大连理工大学学报,2011,51(2):196-200. LI Man, ZHANG Hong-tao, JIA Qian-zhong, et al. Investigation on influences of microcosmic factors on cutting performance of coated cemented carbide tools[J]. Journal of Dalian University of Technology,2011,51(2):196-200.
[27] 徐银超, 陈康华, 王社权. TiN和TiAlN涂层硬质合金的氧化和切削性能[J]. 粉末冶金材料科学与工程,2011,16(3):425-430. XU Yin-chao, CHEN Kang-hua, WANG She-quan. Oxidation and cutting properties of TiN and TiAlN coated cemented carbide[J]. Materials Science and Engineering of Powder Matallurgy,2011,16(3):425-430.
[28] 王均涛, 刘平, 李伟, 等. TiAlN硬质涂层的研究进展[J]. 热加工工艺,2010,39(20):104-110. WANG Jun-tao, LIU Ping, LI Wei, et al. Research progress of TiAlN hard coating[J]. Material and Heat Treatment,2010,39(20):104-110.
[1] 林翠, 赵晴, 文庆杰. TC1钛合金的腐蚀加工及其对基体性能影响[J]. 材料工程, 2015, 43(7): 48-55.
[2] 李龙, 祝志超, 张心金, 刘会云. 利用控轧控冷技术开发热轧不锈钢复合板的实验研究[J]. 材料工程, 2015, 43(7): 62-67.
[3] 江陆, 孙新军, 李昭东, 雍岐龙, 王长军. 两相区回火温度对Mn-Mo系微合金钢亚稳奥氏体形成及力学性能的影响[J]. 材料工程, 2015, 43(5): 1-7.
[4] 万同, 杨光瑞, 张婕, 王彪. 柠檬酸醚酯增塑剂的合成及增塑聚乳酸[J]. 材料工程, 2015, 43(5): 67-74.
[5] 刘铭, 汝继刚, 臧金鑫, 张坤, 何维维, 王亮, 陈高红. 新型Al-Zn-Mg-Cu铝合金热稳定性研究[J]. 材料工程, 2015, 43(4): 13-18.
[6] 马彦, 陈朝辉. 1800℃热处理对PIP法C/SiC复合材料结构和性能的影响[J]. 材料工程, 2015, 43(4): 98-101.
[7] 傅田, 李文亚, 杨夏炜, 李锦锋, 高大路. 搅拌摩擦点焊技术及其研究现状[J]. 材料工程, 2015, 43(4): 102-114.
[8] 彭建, 彭毅, 韩韡, 潘复生. 挤压温度对Mg-2Zn-Mn-0.5Nd镁合金组织和性能的影响[J]. 材料工程, 2015, 43(3): 23-27.
[9] 张同环, 周仕学, 牛海丽, 肖成柱, 王乃飞. 碳助磨制备纳米镁铝储氢合金的结构及储氢性能研究[J]. 材料工程, 2015, 43(3): 48-53.
[10] 刘正, 董阳, 毛萍莉, 于金程. 轧制AZ31镁合金板材(4mm)动态压缩性能与失效行为[J]. 材料工程, 2015, 43(2): 61-66.
[11] 王洁, 聂宝华, 蔡成, 张峥. 加氢反应器环境服役的2.25Cr1Mo钢性能退化研究[J]. 材料工程, 2015, 43(1): 82-88.
[12] 王定刚, 肖程波, 宋尽霞, 李青, 余乾. 不同稀土元素添加量对K465合金微观组织与力学性能的影响[J]. 材料工程, 2014, 0(8): 46-50.
[13] 王晓博, 俞宏英, 关望, 孙冬柏. X52钢在普光气田服役条件下的CO2腐蚀行为[J]. 材料工程, 2014, 0(8): 72-78.
[14] 张丁非, 耿青梅, 杨绪盛, 余大亮, 潘复生. 新型复合挤压工艺中温度对AZ61组织和性能的影响[J]. 材料工程, 2014, 0(7): 1-4.
[15] 曹东, 张晓云, 陆峰, 刘建华. 先进复合材料T300/5405综合环境实验谱的研究[J]. 材料工程, 2014, 0(7): 73-78.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn