Please wait a minute...
 
材料工程  2014, Vol. 0 Issue (11): 38-42    DOI: 10.11868/j.issn.1001-4381.2014.11.007
  材料与工艺 本期目录 | 过刊浏览 | 高级检索 |
ZrB2和POSS对碳布/酚醛复合材料烧蚀性能的影响
魏化震, 李莹, 安振河
山东非金属材料研究所, 济南 250031
Effect of ZrB2 and POSS on Ablation Properties of Carbon Fabric/Phenolic Composite
WEI Hua-zhen, LI Ying, AN Zhen-he
Shandong Institute of Non-metallic Materials, Jinan 250031, China
全文: PDF(1337 KB)   HTML()
输出: BibTeX | EndNote (RIS)      
摘要 以ZrB2为改性剂,采用热压工艺制备了碳布/酚醛复合材料,通过氧/乙炔烧蚀实验对复合材料的烧蚀性能进行了研究,利用扫描电镜和能量色散谱仪对复合材料烧蚀形貌和成分进行了分析。结果表明:经氧/乙炔焰烧蚀后,在复合材料表面形成了一层陶瓷层,其质量烧蚀率为0.04585g/s,线烧蚀率为-0.013mm/s,经二次烧蚀后,复合材料的质量烧蚀率为0.0096g/s。当ZrB2和POSS配合使用改性碳布/酚醛复合材料时,碳布/酚醛复合材料的质量烧蚀率可达0.025g/s,二次质量烧蚀率可达0.0089g/s。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
魏化震
李莹
安振河
关键词 酚醛树脂复合材料烧蚀ZrB2POSS    
Abstract:Using ZrB2 as modifier, and adopting hot pressing process, a kind of carbon fabric reinforced phenolic(C/PF) composite was made. The ablation property of the C/PF composite was studied by oxygen/ethyne ablation test. The composite ablation appearance and the composition were analyzed by scanning electron microscope and energy spectrometer respectively after the ablation test. The results show that one ceramic layer is formed on the composite surface after ablated by the oxygen/ethyne flame. The mass ablation rate is 0.04585g/s and the line ablation rate of the composite is -0.013g/s. After second ablation, the mass ablation rate is 0.0096g/s. However, the mass ablation rate can reach 0.025g/s when the composite is modified by ZrB2 and POSS, the second time mass ablation rate can reach 0.0089g/s.
Key wordsPF resin    composite    ablation    ZrB2    POSS
收稿日期: 2014-07-09      出版日期: 2014-11-20
1:  TQ327.3  
通讯作者: 魏化震(1964-), 男, 研究员, 博士, 中国兵器首席专家, 研究方向为纤维增强树脂基复合材料, 联系地址:山东省济南市天桥区田庄东路3号山东非金属材料研究所(250031).     E-mail: weihz53@sina.com
引用本文:   
魏化震, 李莹, 安振河. ZrB2和POSS对碳布/酚醛复合材料烧蚀性能的影响[J]. 材料工程, 2014, 0(11): 38-42.
WEI Hua-zhen, LI Ying, AN Zhen-he. Effect of ZrB2 and POSS on Ablation Properties of Carbon Fabric/Phenolic Composite. Journal of Materials Engineering, 2014, 0(11): 38-42.
链接本文:  
http://jme.biam.ac.cn/CN/10.11868/j.issn.1001-4381.2014.11.007      或      http://jme.biam.ac.cn/CN/Y2014/V0/I11/38
[1] 刘国勤,谢德龙.酚醛树脂基复合材料的研究进展[J],河南化工,2010,27(6):21-24.LIU Guo-qin,XIE De-long.Research progress of phenolic composite[J]. Henan Chemical Industry,2010,27(6):21-24.
[2] UPADHYA K,YANG J M,HOFFMANN W P.Materials for ultra-high temperature structural applications[J]. Am Ceram Soc Bull,1997,76(12):51-53.
[3] WILLIAM G F,HILMAS G E.NSF-AFOSR Joint Workshop on Future Ultra-High Temperature Materials[R]. NSF Grant DMR-0403004,2004.
[4] BRONSON A,MA Y T,MUTSO R. Compatibility of refractory metal boride/oxide composites at ultra-high temperatures[J]. J Electrochem Soc,1992,139(11):3183-3187.
[5] GASCH M,ELLERBY D,IRBY E et al. Processing properties and arc jet oxidation of hafnium diboride/silicon carbide ultra high temperature ceramics [J]. Journal of Materials Science,2004,39:5925-5929.
[6] OPEKA M M, TALMY I G, ZAYKOSKI J A. Oxidation based materials selection for 2000℃ plus hypersonic aerosurfaces: theoretical considerations and historical experience[J]. Journal of Materials Science, 2004, 39(19): 5887-5904.
[7] HUNOLD K,KROSS U,HABIT J,et al.Preventing erosion insubmerged nozzle[J].Ceramic Industry,2001,151(6):60-65.
[8] 邱军,黄裕杰,胡友惠.耐高温梯形聚甲基倍半硅氧烷的合成研究[J].功能高分子学报,1999,12(2):173-176.QIU Jun,HUANG Yu-jie,HU You-hui.Study on the synthesis of heat resisting ladder polymethylsilsesquioxane[J].Journal of Functional Polymers, 1999,12(6):173-176.
[9] 张文娟,陈剑华.耐高温有机硅涂料及粘接剂[J].有机硅材料,2002,16(3):28-31.ZHANG Wen-juan,CHEN Jian-hua.High-temperature resistant silicone coating and adhesive[J].Silicone Material,2002,16(3):28-31.
[10] 李震,孙红尧,陈水根,等. 有机硅耐候涂料的研制和性能试验[J].腐蚀与防护,2002,23(2):60-62. LI Zhen,SUN Hong-yao,CHEN Shui-gen,et al.Development and experiments of organosilicone weathering coating[J].Corrosion and Protection, 2002,23(2):60-62.
[11] 何富安,张黎明,王冠海,等. 反应性多面低聚倍半硅氧烷对聚烯烃的改性研究[J].高分子通报,2006,(5):45-51. HE Fu-an,ZHANG Li-ming,WANG Guan-hai,et al.Modification of polyolefin by reaction polyhedral oligomeric silsesquioxane[J].Polymer Bulletin,2006,(5):45-51.
[12] BANEY R H,ITOH M,SAKAKI B A,et al. Organic/inorganic hybrid epoxy nanocomposites from octaaminoethylaminopropylsilsesquioxanes[J]. Chem Rev,1995,95(5):1409-1429.
[13] PROVATAS A,MATISONS J G. Silsesquioxanes: synthesis and applications [J].Trends in Polymer Science,1997,5(10):327-332.
[14] AGASKAR P A.New synthetic route to the hydridospherosiloxanes[J].Inorg Chem,1991,30:2707-2708.
[15] XU H Y,KUO S W,CHANG F C.Significant glass transition temperature increase based on polyhedral oligomeric silsesquioxane(POSS) copolymer through hydrogen bonding[J].Polymer Bulletin,2002,48(6):469-474.
[16] LI G Z,WANG L,TOGHIANI H,et al.Viscoelastic and mechanical properties of vinyl ester(VE)/multifunctional polyhedral oligomeric silsesquioxane(POSS) nanocomposites and multifunctional POSS-styrene copolymers[J].Polymer,2002,43(15):4167-4176.
[17] PHILLIP S H,GONZALEZ R I,CHAFFEE K P,et al.Remarkable so resistance of POSS inorganic/organic polymers[J].International Sampe Symposium and Exhibition,2000,45(Ⅱ):1921-1932.
[1] 徐娜, 沙正骁, 史亦韦. 超声相控阵延迟时间的声速校正及在复合材料中的检测[J]. 材料工程, 2015, 43(9): 74-79.
[2] 王欢, 李嘉禄, 樊威. 纤维体积分数对三维编织复合材料T型梁模态性能的影响[J]. 材料工程, 2015, 43(9): 80-86.
[3] 李铮, 蔡晓兰, 周蕾, 易峰, 余明俊, 张文忠, 郭鲤. CNTs/Al5083复合材料力学性能及增强机制[J]. 材料工程, 2015, 43(8): 1-6.
[4] 陈阁谷, 关莹, 亓宪明, 彭锋, 姚春丽, 孙润仓. 聚合物/层状硅酸盐纳米复合材料阻燃性研究进展[J]. 材料工程, 2015, 43(8): 104-112.
[5] 景红霞, 李巧玲, 叶云, 裴王军. 羰基铁/钛酸钡复合材料的制备及吸波性能[J]. 材料工程, 2015, 43(7): 38-42.
[6] 刘伟, 曹腊梅, 王岭, 徐彩虹, 益小苏. RTM成型工艺对Cf/SiBCN陶瓷基复合材料性能的影响[J]. 材料工程, 2015, 43(6): 1-6.
[7] 李敬勇, 刘涛, 郭宇文. 搅拌摩擦加工铝基复合材料的高温摩擦磨损性能[J]. 材料工程, 2015, 43(6): 21-25.
[8] 倪楠楠, 温月芳, 贺德龙, 益小苏, 郭妙才, 许亚洪. 结构-阻尼复合材料研究进展[J]. 材料工程, 2015, 43(6): 90-101.
[9] 张勇, 谢卫红, 刘宏伟, 张峰. 聚氨酯蜂窝纸板动力学性能及其本构模型[J]. 材料工程, 2015, 43(5): 27-32.
[10] 李雪爱, 王春生, 韩喜江. 原位化学沉淀法制备Fe3O4-石墨复合材料的吸波性能[J]. 材料工程, 2015, 43(5): 44-49.
[11] 冯宇, 何宇廷, 安涛, 崔荣洪, 邵青, 范超华. 湿热环境对航空复合材料加筋板压缩屈曲和后屈曲性能的影响[J]. 材料工程, 2015, 43(5): 81-88.
[12] 董慧民, 安学锋, 益小苏, 闫丽, 苏正涛, 包建文. 纤维增强聚合物基复合材料低速冲击研究进展[J]. 材料工程, 2015, 43(5): 89-100.
[13] 石晓朋, 李曙林, 常飞, 卞栋梁, 尹俊杰. 复合材料加筋壁板低速冲击响应与冲击能量关系[J]. 材料工程, 2015, 43(4): 53-58.
[14] 马彦, 陈朝辉. 1800℃热处理对PIP法C/SiC复合材料结构和性能的影响[J]. 材料工程, 2015, 43(4): 98-101.
[15] 张响, 陈招科, 熊翔. C/C-SiC复合材料表面ZrB2基陶瓷涂层的制备及高温烧结机理[J]. 材料工程, 2015, 43(3): 1-6.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn