Please wait a minute...
 
材料工程  2015, Vol. 43 Issue (3): 98-105    DOI: 10.11868/j.issn.1001-4381.2015.03.017
  综述 本期目录 | 过刊浏览 | 高级检索 |
结构胶胶接汽车车身金属接头抗环境腐蚀性能研究进展
郑锐, 林建平, 吴倩倩, 吴泳荣
同济大学 机械与能源工程学院, 上海 201804
Progress in Research on Environmental Corrosion-resistance of Structural Adhesive Bonding Automotive-body Metal Joint
ZHENG Rui, LIN Jian-ping, WU Qian-qian, WU Yong-rong
School of Mechanical Engineering, Tongji University, Shanghai 201804, China
全文: PDF(1559 KB)  
输出: BibTeX | EndNote (RIS)      
摘要 本文从环境暴露时腐蚀介质的传输规律研究、环境暴露对汽车车身金属胶接接头力学性能影响及其降级机理、金属被粘物表面处理技术几个方面对其胶接接头腐蚀方面的研究现状进行了综述,并探讨了金属胶接接头环境抗腐蚀性能研究的发展趋势,认为腐蚀介质在胶接接头界面的扩散规律、接头金属表面的电化学反应破坏其界面结合性能的机理及规律、金属接头中的电化学腐蚀规律及电化学反应对黏合性能和接头强度影响等方面是今后的主要研究重点。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
郑锐
林建平
吴倩倩
吴泳荣
关键词 汽车车身金属胶接接头环境腐蚀扩散电化学腐蚀界面    
Abstract:Research status on the environmental corrosion resistance of adhesive bonding automotive body metal joint was summarized from the transfer law of corrosive medium when expose to environment, effect of environmental exposure on mechanical properties of adhesive bonding metal joint, the degradation mechanism and surface treatment technology of metal adherend. The developing trend of the study on the environmental corrosion resistance of metal bonding joint was discussed. The results show that the further research should focus on the diffusion law of corrosive medium in the interface of the adhesive bonding joint, the mechanism and law of the damage of electrochemical reaction on metal joint surface to the interface bonding performance, the electrochemical corrosion law in metal joint, and the effect of electrochemical reaction on bonding performance and the strength of joint.
Key wordsautomotive-body metal    adhesive bonding joint    environmental corrosion    diffusion    electrochemical corrosion    interface
收稿日期: 2013-08-15     
1:  TG495  
通讯作者: 林建平(1958-),男,博士,教授,博士生导师,研究方向为车辆轻量化与现代成形技术,联系地址:上海市曹安路4800号同济大学机械与能源工程学院(201804),jplin58@tongji.edu.cn     E-mail: jplin58@tongji.edu.cn
引用本文:   
郑锐, 林建平, 吴倩倩, 吴泳荣. 结构胶胶接汽车车身金属接头抗环境腐蚀性能研究进展[J]. 材料工程, 2015, 43(3): 98-105.
ZHENG Rui, LIN Jian-ping, WU Qian-qian, WU Yong-rong. Progress in Research on Environmental Corrosion-resistance of Structural Adhesive Bonding Automotive-body Metal Joint. Journal of Materials Engineering, 2015, 43(3): 98-105.
链接本文:  
http://jme.biam.ac.cn/jme/CN/10.11868/j.issn.1001-4381.2015.03.017      或      http://jme.biam.ac.cn/jme/CN/Y2015/V43/I3/98
[1] DETLEF S, ANDREAS L. Structural Bonding in Automobile Manufacturing [M]. Germany: Dow Automotive, 2007: 4-10.
[2] BORSELLINO C, DI BELLA G, RUISI V F. Adhesive joining of aluminium AA6082: The effects of resin and surface treatment [J]. International Journal of Adhesion & Adhesives, 2009, 29(1): 36-44.
[3] FRIGIONE M, AIELLO M A, NADDEO C. Water effects on the bond strength of concrete/concrete adhesive joints [J]. Construction and Building Materials, 2006, 20(10): 957-970.
[4] 焦洁清. 铝合金胶接接头环境破坏机理[J]. 粘接, 1987, 8(2):1-7.JIAO J Q. Failure mechanism in aluminium alloy bonding joints[J]. Adhesion in China, 1987, 8(2):1-7.
[5] BHOWMIK S, BONIN H W, BUI V T, et al. Durability of adhesive bonding of titanium in radiation and aerospace environments [J]. International Journal of Adhesion & Adhesives, 2006, 26(6): 400-405.
[6] ZANNI-DEFFARGES M P, SHANAHAN M E R. Diffusion of water into an epoxy adhesive: comparison between bulk behavior and adhesive joints [J]. International Journal of Adhesion and Adhesives, 1995, 15(3): 137-142.
[7] COMYN J. Kinetics and Mechanisms of Environmental Attack. Durability of Structural Adhesives [M]. London: Applied Science, 1983: 85-129.
[8] SRIVASTAVA V K, HOGG P J. Moisture effects on the toughness, mode-I and mode-II of particles filled quasi-isotropic glass-fibre reinforced polyester resin composites [J]. Journal of Materials Science, 1998, 33(5): 1129-1136.
[9] SRIVASTAVA V K. Influence of water immersion on mechanical properties of quasi-isotropic glass fiber reinforced epoxy vinylester resin composites [J]. Materials Science and Engineering A, 1999, 263(1): 56-63.
[10] TCHARKHTCHI A, BRINNEC P Y, VERDU J. Water absorption characteristics of diglycidylether of butane diol-3, 5-diethyl-2, 4-diaminotoluene networks [J]. Polymer, 2000, 41(15): 5777-5785.
[11] AL-HARTHI M, LOUGHLIN K, KAHRAMAN R. Moisture diffusion into epoxy adhesive: testing and modeling [J]. Adsorption, 2007, 13(2): 115-120.
[12] BARTON A F M. Handbook of solubility and other cohesion parameters [M]. Boca Raton, FL: CRC Press, 1985: 238-239.
[13] BELLENGER V, VERDU J, MOREL E. Structure-properties relationships for densely cross-linked epoxide amine systems based on epoxide or amine mixtures 2: Water absorption and diffusion [J]. Journal of Materials Science, 1989, 24(1):63-68.
[14] ZHOU J M, LUCAS J P. Hygrothermal effects of epoxy resin Part I: the nature of water in epoxy [J]. Polymer, 1999, 40(20): 5505-5512.
[15] CRANK J, PARK G S. Water in Polymers, Diffusion in Polymers [M]. London: Academic Press, 1968: 259-313.
[16] LOH W K, CROCOMBE A D, ABDEL WAHAB M M, et al. Modelling anomalous moisture uptake, swelling and thermal characteristics of a rubber toughened epoxy adhesive [J]. International Journal of Adhesion & Adhesives, 2005, 25(1): 1-12.
[17] MUBASHAR A, I ASHCROFT A, CRITCHLOW G W, et al. Moisture absorption-desorption effects in adhesive joints [J]. International Journal of Adhesion & Adhesives, 2009, 29(8): 751-760.
[18] BALDAN A. Review: adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: adhesives, adhesion theories and surface pretreatment [J]. Journal of Materials Science, 2004, 39(1): 1-49.
[19] COMRIE R, AFFROSSMAN S, DAVID H, et al. Ageing of adhesive bonds with various surface treatments, part 1: aluminum-dicyandiamide cured epoxy joints [J]. The Journal of Adhesion, 2005, 81(12): 1157-1181.
[20] BOWDITCH M R. The durability of adhesive joints in the presence of water [J]. International Journal of Adhesion & Adhesives, 1996, 16 (2): 73-79.
[21] LAPIQUE F, REDFORD K. Curing effects on viscosity and mechanical properties of a commercial epoxy resin adhesive [J]. International Journal of Adhesion & Adhesives, 2002, 22(4): 337-346.
[22] MAYS G C, HUTCHINSON A R. Adhesives in Civil Engineering [M]. Cambridge: Cambridge University Press, 1992: 163-170.
[23] SHAW S J. Epoxy Resin Adhesives, Chemistry and Technology of Epoxy Resins [M]. London: Blackie Academic & Professional, 1993: 206-255.
[24] 高岩磊, 周二鹏, 郧海丽, 等. 环氧/铝胶接接头在氯化钠水溶液中的老化行为[J]. 热固性树脂, 2011, 26(3): 18-20. GAO Y L, ZHOU E P, YUN H L, et al. Aging behavior of epoxy/Al adhesive joint in sodium chloride aqueous solution [J]. Thermosetting Resin, 2011, 26(3): 18-20.
[25] MARIATERESA L, MARIAENRICA F. Effects of humid environment on thermal and mechanical properties of a cold-curing structural epoxy adhesive [J]. Construction and Building Materials, 2012, 30: 753-760.
[26] LIU Z L, SUN R N, MAO Z P, et al. Effects of phosphate pretreatment and hot-humid environmental exposure on static strength of adhesive-bonded magnesium AZ31 sheets [J]. Surface & Coatings Technology, 2012, 206(16): 3517-3525.
[27] RIDER A N, ARNOTT D R. Boiling water and silane pre-treatment of aluminium alloys for durable adhesive bonding [J]. International Journal of Adhesion & Adhesives, 2000, 20(3): 209-220.
[28] DAVIS G D, WHISNANT P L, VENABLES J D. Subadhesive hydration of aluminum adherends and its detection by electrochemical impedance spectroscopy [J]. Journal of Adhesion Science and Technology, 1995, 9(4): 433-442.
[29] BROCKMANN W, HENNEMANN O D, KOLLEK H, et al. Adhesion in bonded aluminium joints for aircraft construction [J]. International Journal of Adhesion & Adhesives, 1986, 6(3): 115-143.
[30] LUNDER O, OLSENB B, NISANCIOGLU K. Pre-treatment of AA6060 aluminium alloy for adhesive bonding [J]. International Journal of Adhesion & Adhesives, 2002, 22(2): 143-150.
[31] LUNDER O, LAPIQUE F, JOHNSEN B, et al. Effect of pre-treatment on the durability of epoxy-bonded AA6060 aluminum joints [J]. International Journal of Adhesion & Adhesives, 2004, 24 (4): 107-117.
[32] VERA R, DELGADO D, ROSALES BLANCA M. Effect of atmospheric pollutants on the corrosion of high power electrical conductors: part 1 aluminum and AA6201 alloy [J]. Corrosion Science, 2006, 48(10): 2882-2900.
[33] DONG C F, SHENG H, AN Y H, et al. Corrosion of 7A04 aluminum alloy under defected epoxy coating studied by localized electrochemical impedance spectroscopy [J]. Progress in Organic Coatings, 2010, 67(3): 269-273.
[34] UNDERHILL P R, DUQUESNAY D L. The role of corrosion/oxidation in the failure of aluminum adhesive joints under hot, wet conditions [J]. International Journal of Adhesion & Adhesives, 2006, 26(1-2): 88-93.
[35] WAN T T, LIU Z X, BU M Z, et al. Effect of surface pretreatment on corrosion resistance and bond strength of magnesium AZ31 alloy [J]. Corrosion Science, 2013, 66: 33-42.
[36] FERNANDO M, HARJOPRAYITNO W W, KINLOCH A J. A fracture mechanics study of the influence of moisture on the fatigue behaviour of adhesively bonded aluminum-alloy joints [J]. International Journal of Adhesion and Adhesives, 1996, 16(2): 113-119.
[37] LOH W K, CROCOMBE A D, ABDEL WAHAB M M, et al. Environmental degradation of the interfacial fracture energy in an adhesively bonded joint [J]. Engineering Fracture Mechanics, 2002, 69(18): 2113-2128.
[38] HADAVINIA H, KINLOCH A J, LITTLE M S G, et al. The prediction of crackgrowth in bonded joints under cyclic-fatigue loading I. Experimental studies [J]. International Journal of Adhesion and Adhesives, 2003, 23(6): 449-461.
[39] DIGBY R P, PACKHAM D E. Pretreatment of aluminmum: topography, surface chemistry and adhesive bond durability[J]. International Journal of Adhesion and Adhesives, 1995, 15(2): 61-71.
[40] SHAFFER D K, DAVIS G D, MCNAMARA D K, et al. Durability properties for adhesively bonded structural aerospace applications [J]. International SAMPE Metals and Metals Processing Conference, 1992, 3: 629-644.
[41] BALDAN A. Adhesion phenomena in bonded joints [J]. International Journal of Adhesion & Adhesives, 2012, 38: 95-116.
[42] KINLOCH A J. The science of adhesion [J]. Journal of Materials Science, 1980, 15(9): 2141-2166.
[43] RECHNER R, JANSEN I, BEYER E. Influence on the strength and aging resistance of aluminium joints by laser pre-treatment and surface modification [J]. International Journal of Adhesion & Adhesives, 2010, 30(7): 595-601.
[44] YANG H J, ZHANG Y S, LAI X M, et al. Method for repairing of adhesive-bonded steel [J]. Materials and Design, 2010, 31(1): 260-266.
[45] BROAD R, FRENCH J, SAUER J. New, effective, ecological surface pretreatment for highly durable adhesively bonded metal joints [J]. International Journal of Adhesion & Adhesives, 1999, 19 (2-3): 1935-198.
[46] KINLOCH A J, ABBEY W. The Service Performance of Structural Adhesive Joints [R]. Bremen, West Germany: Adhesion As a Basis for Joints. 1982: 181.
[47] CRITCHLOW G W, BREWIS D M. Influence of surface macroroughness on the durability of epoxide-aluminium joints [J]. International Journal of Adhesion & Adhesives, 1995, 15 (3): 173-176.
[48] PETRIE EDWARD M. Adhesive bonding of aluminum alloys [J]. Metal Finishing, 2007, 105(9):49-56.
[49] 杨孚标, 肖加余, 曾竟成, 等. 铝合金磷酸阳极化及胶接性能分析[J]. 材料工程, 2006, (2): 7-11. YANG F B, XIAO J Y, ZENG J C, et al. The phosphoric acid anodizing of aluminum alloys for adhesive bonding [J]. Journal of Materials Engineering, 2006, (2):7-11.
[50] ZHANG J S, ZHAO X H, ZUO Y, et al. The bonding strength and corrosion resistance of aluminum alloy by anodizing treatment in a phosphoric acid modified boric acid/sulfuric acid bath [J]. Surface & Coatings Technology, 2008, 202(14): 3149-3156.
[51] WAN T T, LIU Z X, BU M Z, et al. Effect of Na2MoO4 on bond strength of adhesive-bonded phosphate coated magnesium AZ31sheets [J]. International Journal of Adhesion & Adhesives, 2013, 40: 38-48.
[52] LI G L, WANG X M, LI A J, et al. Fabrication and adhesive properties of thin organosilane films coated on low carbon steel substrates [J]. Surface & Coatings Technology, 2007, 201(24): 9571-9578.
[53] 张颖怀, 许立宁, 路民旭.硅烷处理对有机涂层/金属胶接接头力学性能的影响[J]. 材料工程, 2009, (5):30-33, 37. ZHANG Y H, XU L N, LU M X. Influence of silane treatment on mechanical performance of organic coating/metal adhesive Joint [J]. Journal of Materials Engineering, 2009, (5):30-33, 37.
[54] YUE Y Y, LIU Z X, WAN T T, et al. Effect of phosphate-silane pretreatment on the corrosion resistance and adhesive-bonded performance of the AZ31 magnesium alloys [J]. Progress in Organic Coatings, 2013, 76(5): 835-843.
[55] GLEDHILL R A, SHAW S J, TOD D A. Durability of adhesive-bonded joints employing organosilane coupling agents [J]. International Journal of Adhesion & Adhesives, 1990, 10(3): 192-198.
[56] BERTHO J, STOLOJAN V, ABEL M L, et al. The effect of silane incorporation on a metal adhesive interface: a study by electron energy loss spectroscopy [J]. Micron, 2010, 41 (2): 130-134.
[57] KRAM M, JANSEN K M B, ERNST L J, et al. Atmospheric pressure plasma surface modification of titanium for high temperature adhesive bonding [J]. International Journal of Adhesion & Adhesives, 2011, 31 (7): 598-604.
[58] UNDERHILL P R, RIDERA N, DUQUESNAY D L. The effect of warm water surface treatments on the fatigue life in shear of aluminum joints [J]. International Journal of Adhesion & Adhesives, 2006, 26(4): 199-205.
[59] SALEEMA N, SARKAR D K, PAYNTER R W, et al. A simple surface treatment and characterization of AA 6061 aluminum alloy surface for adhesive bonding applications [J]. Applied Surface Science, 2012, 261(15): 742-748.
[1] 王忻凯, 邢丽, 徐卫平, 黄春平, 刘奋成. 工艺参数对铝合金搅拌摩擦增材制造成形的影响[J]. 材料工程, 2015, 43(5): 8-12.
[2] 蒋淑英, 李世春. Al/Fe液-固界面扩散反应层生长动力学分析[J]. 材料工程, 2015, 43(5): 62-66.
[3] 刘政军, 宫颖, 苏允海. 镁铝异种金属TIG焊接头性能的研究[J]. 材料工程, 2015, 43(3): 18-22.
[4] 董凤, 陈少平, 胡利方, 樊文浩, 孟庆森. 电场作用下AZ31B/Cu扩散界面的结构及性能[J]. 材料工程, 2015, 43(2): 35-40.
[5] 张建, 罗国强, 沈强, 黄治军. 添加Ni箔中间层的Mg-Al扩散焊接接头界面结构和力学性能[J]. 材料工程, 2015, 43(1): 13-17.
[6] 李万青, 魏红梅, 何鹏, 高丽娇, 林铁松, 李小强, 赫兰春. Ti3Al和Ti2AlNb合金扩散连接界面的组织及力学性能[J]. 材料工程, 2015, 43(1): 37-43.
[7] 罗云烽, 李阳, 肈研, 谢富原. 国产T800级炭纤维表面特性及其复合材料微观界面性能[J]. 材料工程, 2014, 0(9): 83-88.
[8] 张植权, 周邦新, 蔡琳玲, 王均安, 刘文庆. 利用APT研究RPV模拟钢中相界面原子偏聚特征[J]. 材料工程, 2014, 0(9): 89-93.
[9] 刘猛, 白书欣, 李顺, 赵恂, 熊德赣. 界面设计对Sip/Al复合材料组织和性能的影响[J]. 材料工程, 2014, 0(8): 61-66.
[10] 董建民, 李嘉荣, 牟仁德, 赵金乾, 史振学, 刘世忠. 高温热处理对带热障涂层DD6单晶高温合金互扩散行为及持久断裂特征的影响[J]. 材料工程, 2014, 0(6): 51-55.
[11] 赵艳, 程从前, 曹志远, 赵杰. 304不锈钢与Sn作用后腐蚀性能评价[J]. 材料工程, 2014, 0(3): 41-45.
[12] 张亮, 韩继光, 何成文, 郭永环, 张剑. 热循环对SnAgCu(纳米Al)/Cu焊点界面与性能影响[J]. 材料工程, 2014, 0(3): 55-59.
[13] 李永德, 徐娜, 郭卫民, 吴晓峰, 时军波, 刘树伟. 高压气相热充氢对SUJ2轴承钢超高周疲劳行为的影响[J]. 材料工程, 2014, 0(2): 87-93,98.
[14] 李佳, 盛光敏. Ti/Nb/Cu作缓冲层的TiC金属陶瓷/304不锈钢扩散连接[J]. 材料工程, 2014, 0(12): 60-65.
[15] 卢国锋, 乔生儒, 许艳. 连续纤维增强陶瓷基复合材料界面层研究进展[J]. 材料工程, 2014, 0(11): 107-112.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn