Please wait a minute...
 
材料工程  2013, Vol. 0 Issue (5): 83-88    DOI: 10.3969/j.issn.1001-4381.2013.05.017
  测试与表征 本期目录 | 过刊浏览 | 高级检索 |
2D-Cf/SiC复合材料缺口试件拉伸力学行为研究
郭洪宝1, 王波1, 矫桂琼1, 刘永胜2
1. 西北工业大学 力学与土木建筑学院, 西安 710129;
2. 西北工业大学 材料学院, 西安 710072
Tensile Mechanical Behavior of Notched 2D-Cf/SiC Composites
GUO Hong-bao1, WANG Bo1, JIAO Gui-qiong1, LIU Yong-sheng2
1. School of Mechanics, Civil Engineering and Architecture, Northwestern Polytechnical University, Xi’an 710129, China;
2. School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an 710072, China
全文: PDF(2745 KB)   HTML()
输出: BibTeX | EndNote (RIS)      
摘要 通过对V型、半圆型和细线型双边缺口2D-Cf/SiC复合材料试件进行拉伸实验,研究了不同形状缺口对试件拉伸力学行为的影响。通过引伸计获得了拉伸过程中缺口段材料整体拉伸变形与净截面应力之间的对应关系;通过应变片获得了缺口附近局部材料的应变数值,直观体现了缺口周围的应变集中现象;依据应变变化规律,分析了双边缺口试件的损伤失效进程。通过对比标准拉伸试件,全面分析了2D-Cf/SiC复合材料双边缺口试件拉伸净强度的主要影响因素和破坏机理;最后通过有限元模拟,得到了三种缺口试件缺口段材料的应变分布情况。结果表明:拉伸过程中缺口试件缺口段材料损伤失效进程具有明显的非同步性,净拉伸强度随缺口形状不同出现不同程度下降;有限元模拟结果与实验结果吻合较好。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
关键词 2D-Cf/SiC复合材料缺口试件拉伸力学行为    
Abstract:The influence of notch types on tensile mechanical behavior of 2D-Cf/SiC composite laminates was studied by experimental and numerical methods. Specimens with symmetrical V shape, half round shape and hairline shape notches were tested respectively. The relationship between net stress and tensile deformation closed to the notches was obtained with extensometer. With strain gauges on the surface of notched specimens, the strain variation between notches was obtained. And strain concentration effect was also clearly expressed. In accordance with the law of strain variation, the damage evolution and failure process of the notched specimens were analyzed. By comparing results with that of standard specimens, the failure mechanism of the notched 2D-Cf/SiC composites was discussed, the main influencing factors to the tensile strength were also determined. Furthermore, by finite element analysis (FEA), the strain distribution of notched specimens was simulated. The results indicate that there exists asynchronous damage evolution and failure process on material between notches during tensile process, and the specimen’s net tensile strength decreases to some extent with different notch types; the FEA results have good agreement with experimental data.
Key words2D-Cf/SiC composite    notched specimen    tension    mechanical behavior
收稿日期: 2012-06-18      出版日期: 2013-05-20
1:  O34  
  TB332  
作者简介: 郭洪宝(1986-),男,硕士,主要从事先进连续纤维增韧陶瓷基复合材料力学性能研究,联系地址:陕西省西安市西北工业大学长安校区883信箱(710129),E-mail:guohongbao1101@126.com
引用本文:   
郭洪宝, 王波, 矫桂琼, 刘永胜. 2D-Cf/SiC复合材料缺口试件拉伸力学行为研究[J]. 材料工程, 2013, 0(5): 83-88.
GUO Hong-bao, WANG Bo, JIAO Gui-qiong, LIU Yong-sheng. Tensile Mechanical Behavior of Notched 2D-Cf/SiC Composites. Journal of Materials Engineering, 2013, 0(5): 83-88.
链接本文:  
http://jme.biam.ac.cn/CN/10.3969/j.issn.1001-4381.2013.05.017      或      http://jme.biam.ac.cn/CN/Y2013/V0/I5/83
[1] 邹武,张康助,张立同.陶瓷基复合材料在火箭发动机上的应用[J].固体火箭技术,2000,23(2):60-64. ZOU Wu, ZHANG Kang-zhu, ZHANG Li-tong. Application of ceramic matrix composite to rocket motor[J]. Journal of Solid Rocket Technology, 2000, 23(2):60-64.
[2] 张建艺.陶瓷基复合材料在喷管上的应用[J].宇航材料工艺,2000,(4):14-16.ZHANG Jian-yi. Ceramic matrix composite applications in nozzle[J]. Aerospace Materials and Technology, 2000,(4):14-16.
[3] 李刚.二维编织C/SiC复合材料力学性能的试验研究.西安:西北工业大学,2007.
[4] 熊伟,矫桂琼,刘红霞.平纹编织C/SiC复合材料的断裂韧性[J].硅酸盐学报,2008,36(8):1057-1061.XIONG Wei, JIAO Gui-qiong, LIU Hong-xia. Fracture toughness of plain woven C/SiC composites[J]. Journal of the Chinese Ceramic Society, 2008, 36(8):1057-1061.
[5] 管国阳,矫桂琼,张增光,等.平纹编织C/SiC复合材料的失效判据[J].硅酸盐学报,2005,33(9):1100-1104.GUAN Guo-yang, JIAO Gui-qiong, ZHANG Zeng-guang, et al. Phenomenal failure criteria of a plain woven C/SiC composite[J]. Journal of the Chinese Ceramic Society, 2005, 33(9):1100-1104.
[6] 杨成鹏,矫桂琼,王波.2D-C/SiC复合材料的单轴拉伸力学行为及其强度[J].力学学报,2011,43(2):330-337.YANG Cheng-peng, JIAO Gui-qiong, WANG Bo. Uniaxial tensile stress-strain behavior and strength of plain woven C/SiC composite[J]. Chinese Journal of Theoretical and Applied Mechanics, 2011, 43(2):330-337.
[7] WU Xiao-jun, QIAO Sheng-ru, HOU Jun-tao, et al. Tensile creep behavior of notched two-dimensional-C/SiC composite[J]. Composites Science and Technology, 2006, 66(7-8):993-1000.
[8] JU S H, CHUNG H Y, JHAO B J. Experimental calculation of mixed-mode notch stress intensity factors for anisotropic materials[J]. Engineering Fracture Mechanics, 2009, 76(14):2260-2271.
[9] JI Gang-chang, QIAO Sheng-ru, DU Shuang-ming, et al. Three-point bending fracture characteristics of three-dimensional-C/SiC with single-edge notch beam specimens[J]. Materials Science and Engineering:A, 2008, 483-484:123-126.
[10] 侯军涛,乔生儒,韩栋,等.2D-C/SiC缺口试样的拉-拉疲劳损伤[J].材料导报,2005,19(11):140-143. HOU Jun-tao, QIAO Sheng-ru, HAN Dong, et al. Tension-tension fatigue damages of 2D-C/SiC notched specimens[J]. Material Review, 2005, 19(11): 140-143.
[11] 侯军涛,乔生儒,韩栋,等.2D-C/SiC缺口试样的拉伸行为[J].宇航材料工艺,2006,36(5):44-49. HOU Jun-tao, QIAO Sheng-ru, HAN Dong, et al. Tensile behaviors of 2D-C/SiC notched specimens[J]. Aerospace Materials and Technology, 2006, 36(5):44-49.
[12] 熊伟.C/SiC复合材料断裂、损伤力学行为研究.西安:西北工业大学,2009.
[13] HEREDIA F E, SPEARING S M, MACKIN T J, et al. Notch effects in carbon matrix composites[J]. J Am Ceram Soc, 1994, 77(11):2817-2827.
[1] 王玉昌, 兰鹏, 李杨, 张家泉. 合金元素对Fe-Mn-C系TWIP钢力学行为的影响[J]. 材料工程, 2015, 43(9): 30-38.
[2] 王亚杰, 王波, 张龙, 马宏毅. 玻璃纤维-铝合金正交层板的拉伸性能研究[J]. 材料工程, 2015, 43(9): 60-65.
[3] 赵勇桃, 董俊慧, 张韶慧, 刘宗昌, 李文学. P92钢高温拉伸断口形貌的研究[J]. 材料工程, 2015, 43(4): 85-91.
[4] 高禹, 王钊, 陆春, 包建文, 宋恩鹏, 董尚利. 高性能树脂基复合材料典型空天环境下动态力学行为研究现状[J]. 材料工程, 2015, 43(3): 106-112.
[5] 代士维, 张乐天, 李俊, 乔新峰, 马跃. 蒙脱土/碳纳米管组成对聚乙烯复合材料性能的影响[J]. 材料工程, 2015, 43(10): 7-13.
[6] 杨东平, 胥聪敏, 罗金恒, 王珂, 李辉辉. 0.8设计系数用X80管线钢在近中性pH溶液中的应力腐蚀开裂行为[J]. 材料工程, 2015, 43(1): 89-95.
[7] 程远, 俞宏英, 王莹, 孙冬柏. 外加电位对X80钢在玉门土壤模拟溶液中应力腐蚀的影响[J]. 材料工程, 2014, 0(8): 55-60.
[8] 严飙, 文立伟. 自动铺缠预浸带热压接研究[J]. 材料工程, 2014, 0(5): 7-11.
[9] 蔡登安, 周光明, 王新峰, 钱元, 刘伟先. 双向玻纤织物复合材料双轴拉伸载荷下的力学行为[J]. 材料工程, 2014, 0(5): 73-77.
[10] 白江波, 熊峻江, 高军鹏, 益小苏. 间隙率对三轴向机织复合材料弹性性能的影响[J]. 材料工程, 2014, 0(3): 14-20.
[11] 马秀萍, 李超. 铸造过热度和热处理对CoCrMo合金显微组织的影响[J]. 材料工程, 2014, 0(3): 66-70.
[12] 焦泽辉, 宋西平, 张敏, 于慧臣. 全片层与双态组织高铌TiAl合金高温原位拉伸研究[J]. 材料工程, 2013, 0(9): 79-83,90.
[13] 白勇, 徐帆, 乔霭潼. 试件残余塑性变形与金属磁记忆检测信号的关系[J]. 材料工程, 2013, (8): 42-49.
[14] 代启锋, 宋仁伯, 关小霞. 超高强铁素体-马氏体双相钢在动态拉伸变形条件下组织和性能研究[J]. 材料工程, 2013, 0(4): 6-11.
[15] 程远, 俞宏英, 王莹, 孟旭, 孙冬柏. 应变速率对X80管线钢应力腐蚀的影响[J]. 材料工程, 2013, 0(3): 77-82.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn