Please wait a minute...
 
材料工程  2015, Vol. 43 Issue (6): 90-101    DOI: 10.11868/j.issn.1001-4381.2015.06.015
  综述 本期目录 | 过刊浏览 | 高级检索 |
结构-阻尼复合材料研究进展
倪楠楠1, 温月芳1, 贺德龙2, 益小苏2, 郭妙才2, 许亚洪3
1. 浙江大学 化学工程与生物工程学院, 杭州 310013;
2. 北京航空材料研究院, 北京 100095;
3. 航天科工三院, 306所, 北京 100074
Process on the Research of Structure-damping Composites
NI Nan-nan1, WEN Yue-fang1, HE De-long2, YI Xiao-su2, GUO Miao-cai2, XU Ya-hong3
1. College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, 310013, China;
2. Beijing Institute of Aeronautical Materials, Beijng 100095, China;
3. Institute, the Third Academy of China Aerospace Science & Industry Corp, Beijing 100074, China
全文: PDF(3153 KB)  
输出: BibTeX | EndNote (RIS)      
摘要 航空航天飞行器的高速、轻质和多功能化的发展,精密电子仪器设备的应用及舒适性要求的提高,对传统结构材料的减重和降噪提出了巨大的挑战。近年来,随着纤维增强复合材料的在航空航天领域应用比重的迅速提升,开发兼具高力学性能和高振动阻尼性能的新型结构-阻尼多功能材料也成为研究的热点问题之一。本文在介绍结构-阻尼复合材料阻尼机理的基础上,综述了国内外关于结构阻尼复合材料主要研究内容及研究成果,并讨论了其今后的发展趋势,包括开发新的多功能阻尼插层材料、引入新的阻尼耗能机制、开发多层次结构模型和对阻尼性能和力学性能的多尺度模拟等。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
倪楠楠
温月芳
贺德龙
益小苏
郭妙才
许亚洪
关键词 结构-阻尼功能化插层复合材料结构阻尼阻尼预测    
Abstract:A huge challenge was presented on mass reduction and noise reduction of the traditional structural material with development of aerospace vehicles toward high-speed, light mass and multi-function, application of the precise electronic equipment and improvement of comfort requirements. In recent years, with the rapid increase of fiber-reinforced composite materials in the application proportion in aerospace, development of the new structure-damping multifunctional materials with both high mechanical properties and high vibration damping performance has become one of the hot topics of research. The damping mechanism of structure-damping composites was described firstly, further the major domestic and international research results of structural damping composites were reviewed, and then its future development trends were discussed, including the development of new multi-purpose damping intercalation materials, the introduction of new damping mechanisms, the development of multi-level structure model and multi-scale simulation of mechanical properties and damping properties.
Key wordsstructure-damping    functional intercalation    composite    structural damping    damping prediction
收稿日期: 2014-11-19     
1:  TB332  
基金资助:国家自然科学基金(2011CB605605);国家863计划(2015AA03A201)
通讯作者: 温月芳(1967-),女,博士,教授,博士生导师,研究方向为碳纤维及碳纤维复合材料,联系地址:浙江省杭州市浙大路38号浙江大学13楼409(310013),E-mail:wenyf@vip163.com     E-mail: wenyf@vip163.com
引用本文:   
倪楠楠, 温月芳, 贺德龙, 益小苏, 郭妙才, 许亚洪. 结构-阻尼复合材料研究进展[J]. 材料工程, 2015, 43(6): 90-101.
NI Nan-nan, WEN Yue-fang, HE De-long, YI Xiao-su, GUO Miao-cai, XU Ya-hong. Process on the Research of Structure-damping Composites. Journal of Materials Engineering, 2015, 43(6): 90-101.
链接本文:  
http://jme.biam.ac.cn/jme/CN/10.11868/j.issn.1001-4381.2015.06.015      或      http://jme.biam.ac.cn/jme/CN/Y2015/V43/I6/90
[1] CHANDRA R,SINGH S P,GUPTA K.Damping studies in fiber-reinforced composites-a review[J].Composite Structures,1999, 46(1): 41-51.
[2] 任勇生,刘立厚.纤维增强复合材料结构阻尼研究进展[J]. 力学与实践, 2004, 26(1): 9-16.REN Y S,LIU L H. Advances in damping analysis and design of fiber reinforced composite material structures[J].Mechanics in Engineering, 2004, 26(1): 9-16.
[3] 张少辉,陈花玲.国外纤维增强树脂基复合材料阻尼研究综述[J]. 航空材料学报,2002, 22(1): 58-62.ZHANG S H, CHEN H L. Development of research on damping of fiber reinforced composite-a review[J]. Journal of Aeronautical Materials, 2002, 22(1): 58-62.
[4] 赵云峰,游少雄. 结构/阻尼一体化复合材料技术及其应用研究进展[J].材料工程,2012, (11): 86-91.ZHAO Y F,YOU S X. Review on the structure/damping co-cured composite materials and their applications[J]. Journal of Materials Engineering, 2012, (11): 86-91.
[5] ZHANG S H,CHEN H L.A study on the damping characteristics of laminated composite with integral viscoelastic layers[J].Composite Structures, 2006, 74(1): 63-69.
[6] SUZUKI K,KAGEYAMA K,KIMPARA I,et a1.Vibration and damping prediction of laminates with constrained viscoelastic layers- numerical analysis by a multilayer higher order deformable finite dement and experimental observations[J].Mechanics of Advanced Materials and Structures, 2003, 10(1): 43-75.
[7] LIAO F S,SU A C,HSU T C. Vibration damping of interleaved carbon fiber epoxy composite beams[J].Journal of Composite Materials, 1994, 28(18): 1840-1854.
[8] WANG H J,CHEN L W. Vibration and damping analysis of a three layered composite annular plate with a viscoelastic mid-layer[J]. Composite Structures, 2002, 58(4): 563-570.
[9] BRONOWICKI A J, GTIRSEL Y. Dual stage passive vibration isolation for optical interferometer missions[A]. Interferometry in Space[C]. Waikoloa: Proceedings of the SPIE, 2003. 753-763.
[10] 王敬丰, 魏文文, 潘复生, 等.金属阻尼材料研究的新进展及发展方向[J]. 材料导报, 2009, 23(13):15-19. WANG J F, WEI W W, PAN F S. New development and prospect of research on metallic damping materials[J].Materials Review,2009,23(13):15-19.
[11] 任怀宇. 黏弹阻尼减振在导弹隔冲击结构中的应用[J].宇航学报, 2007, 28(6): 1494—1499. REN H Y. The application of viscoelastic damping vibration suppression for hock-isolation structure of multistage missile[J]. Journal of Astronautics, 2007, 28(6): 1494-1499.
[12] 潘利剑. 粘弹阻尼层共固化复合材料的性能研究与优化设计[D]. 哈尔滨:哈尔滨工业大学,2006. PAN Li-jian. Study of performance and optimum design of co-cured composite laminates with embedded viscoelastic layer[D]. Harbin: Harbin Institute of Technology, 2006.
[13] 李明俊, 刘桂武, 徐泳文, 等.黏接层对各向异性层合阻尼结构内耗特性的影响[J].复合材料学报,2005,22(4):96-99. LI M J, LIU G W, XU Y W, et al. Influences of bonding layer on the internal friction characteristics of isotropic laminated damped structures [J]. Acta Materiae Composite Sinica, 2005, 22(4): 96-99.
[14] TREGO A, EASTMAN P. Flexural damping predictions of mechanical elements designed using stress coupled, co-cured damped fiber reinforced composites [J]. Journal of Advanced Materials, 1999, 31(1): 7-17.
[15] BIGGERSTAFF J M, KOSMATKA J B. Damping performance of co-cured graphite/epoxy composite laminates with embedded damping materials[J]. Journal of Composites Materials, 1999, 33(15): 1457-1469.
[16] 潘利剑,张博明,戴福洪. 简谐激励下共固化复合材料黏弹阻尼结构的损耗因子研究[J].振动与冲击,2008,27(2): 57-60. PAN L J, ZHANG B M, DAI F H. Loss factor of viscoelastic damping composite material under harmonic excitation [J].Journal of Vibration and Shock, 2008, 27(2): 57-60.
[17] 张少辉, 陈花玲. 共固化复合材料黏弹阻尼结构的损耗因子研究[J].航空材料学报, 2005, 25(1): 53-57. ZHANG S H, CHEN H L. Damping analysis of co-cured composites interleaved viscoelastic layers[J]. Journal of Aeronautical Materials, 2005,25(1):53-57.
[18] NAPOLITANO K L, GRIPPE W, KOSMATKA J B, et al. A comparison of two co-cured damped composite torsion shafts[J]. Composite Structures, 1998, 43(2): 115-125.
[19] JASROBIN S G, RAMIN S, EBRAHIM E. Vibration analysis and design optimization of sandwich beams with constrained viscoelastic core layer[J]. Journal of Sandwich Structures and Materials, 15(2): 203-228.
[20] RAY M C, KUMAR R S. Active constrained layer damping of smart laminated composite sandwich plates using 1-3 piezoelectric composites[J]. International Journal of Mechanical Materials Design, 2012, (8): 197-218.
[21] DING X B, ZHANG H P. Effects of small molecular additives on the damping performance of CPE/ZKF/EBP three-component hybrids[J]. Journal of Materials and Science, 2009, 44(10): 2683-2687.
[22] YEH J Y. Vibration and damping analysis of orthotropic cylindrical shells with electro-rheological core layer[J]. Aerospace Science and Technology, 2011, 15(4): 293-303.
[23] LIU Q X, DING X B, ZHANG H P, et al. Preparation of high-performance damping materials based on carboxylated nitrile rubber: combination of organic hybridization and fiber reinforcement[J]. Journal of Applied Polymer Science, 2009, 114(5): 2655-2661.
[24] SHAN P H, RAY M C. Active control of laminated composite truncated conical shells using vertically and obliquely reinforced 1-3 piezoelectric composites[J]. European Journal of Mechanics A/Solids, 2012, (32): 1-12.
[25] 王娟娟, 冯拉俊, 晁小练, 等. CNT/PZT/RTV复合材料的相结构及阻尼吸声性能[J]. 材料科学与工程学报, 2014, 32(2): 200-206. WANG J J, FENG L J, CHAO X L. Phase structure, damping and absorption performances: CNT/PZT/RTV[J].Journal of Material Science and Engineering, 2014, 32(2): 200-206.
[26] 魏迪永. 高阻尼永磁磁性橡胶的研究[D]. 杭州: 浙江大学, 2013. WEI D Y. Permanent magnetic rubber with high damping capacity[D]. Hangzhou: Zhejiang University, 2013.
[27] LAKES R S. High damping composite materials: effect of structural hierarchy[J]. Journal of Composite Materials, 2002, 36(3): 287-296.
[28] MOREIRA R A S. Multilayer damping treatments: modeling and experimental assessment[J]. Journal of Sandwich Structure and Materials, 2009, (12): 181-198.
[29] ZHAO J, HO K C, SHAMSUDDIN S R, et al. A comparative study of fiber/matrix interface in glass fibre reinforced polyvinylidene fluoride composites[J]. Colloids and Surfaces A: Physicochemical Engineering Aspects, 2012, 413: 58- 64.
[30] ARMANDO P P, ANDRES A G, JOAQUIN M et al. Methodology for damping measurement of engineering materials: application to a structure under bending and torsion loading[J]. Journal of Vibration and Control, 2014, (7): 1-11.
[31] REBILLAT M, BOUTILLON X. Measurement of relevant elastic and damping material properties in sandwich thick plates[J]. Journal of Sound and Vibration, 2011, 330(25): 6098-6121.
[32] DIMITRIS I C, DIMITRIS S V, DIMITRIS A S. Prediction of material coupling effect on structural damping of composite beams and blades [J]. Composite Structures, 2012, 94(5): 1646-1655.
[33] 张少辉,陈花玲,梁天锡.纤维增强树脂基复合材料阻尼特性的数值模拟[J]. 航空材料学报,2004,24(3):10-14. ZHANG S H,CHEN H L,LIANG T X.Numerical simulation on the damping characteristic of fiber reinforced composite[J]. Journal of Aeronautical Materials, 2004, 24(3): 10-14.
[34] ARAU'JO A L, MOTASOARES C M, MOTASOARES C A. Finite element model for hybrid active-passive damping analysis of anisotropic laminated sandwich structures[J]. Journal of Sandwich Structures and Materials, 2010, 12(4): 397-418.
[35] ARAUJO A L,MARTINS P,MOTA SOARES C M,et al. Damping optimization of viscoelastic laminated sandwich composite structures[J]. Structural and Multidisciplinary Optimization, 2009, 39(6): 569-579.
[36] 潘利剑,张博明,戴福洪.黏弹阻尼层共固化复合材料不同温度下的阻尼性能[J]. 复合材料学报,2008,25(1):168-172. PAN L J,ZHANG B M,DAI F H. Damping properties of co-cured composites with interleaved viscoelastic damping layers at different temperatures [J]. Acta Materiae Composite Sinica,2008, 25(1): 168-172.
[37] PAN Li-jian, ZHANG Bo-ming. A new method for the determination of damping in co-cured composite laminates with embedded viscoelastic layer [J]. Journal of Sound and Vibration, 2009, 319(3-5): 822-831.
[38] 张少辉, 柴洪友, 马海全, 等.黏弹阻尼技术在航天器上的应用与展望[J]. 航天器工程,2011,20(1):120-128 ZHANG S H, CHAI H Y, MA H Q,et al. Progress and prospect on viscoelastic damping technology for spacecraft application [J].Space Craft Engineering, 2011, 20(1): 120-128.
[39] 陈健, 冯淑红, 柳征勇. 航天器系统级减振/隔振应用研究及其进展[J]. 强度与环境, 2013, 40(5): 37-42. CHEN J, FENG S H, LIU Z Y. Development of application for planet system-level vibration reduction [J]. Structure and Environment Engineering, 2013, 40(5): 37-42.
[40] 孙大刚, 李占龙, 韩斌慧,等. 基于共固化阻尼层结构的风力机叶片抑颤分析[J].振动与冲击, 2013, 32(19): 93-100. SUN D G, LI Z L, HAN B H. et al. Flutter-suppressing analysis of wind turbine blades on co-curing damping layer stucture[J].Journal of Vibration and Shock, 2013, 32(19): 93-100.
[41] 盛美萍,王敏庆,孙进才.噪声与振动控制技术基础[M]. 北京: 科学出版社, 200l. SHENG M P, WANG M Q, SUN J C. Fundamental Technology of Control of Sound and Vibration [M]. Beijing: Science Press,2001.
[42] WANG Xiang, LIU Han-xing, OUYANG Shi-xi. Damping properties of flexible epoxy resin[J].Journal of Wu Han University of Technology, 2008, 23(3): 411-414.
[43] 王志远,杨留栓.泡沫金属基高阻尼复合材料的研究进展[J].材料开发与应用, 2004,19(3):38-40. WANG Z Y, YANG L S. Progress of high damping foam metal matrix composite[J]. Development and Application of Materials, 2004, 19(3): 38-40.
[44] 方前锋,朱震刚,葛庭燧.高阻尼材料的阻尼机理及性能评估[J]. 物理, 2000,29(9): 541-545. FANG Q F, ZHU Z G, GE T S. Characterization and mechanism of high damping materials[J]. Physics, 2000, 29(9): 541-545.
[45] 张忠明,刘宏昭,王锦程, 等.材料阻尼及阻尼材料的研究进展[J]. 功能材料,2001, 32(3): 227-23. ZHANG Z M,LIU H Z, WANG J C. Damping of materials and progress in the damping materials[J]. Journal of Functional Materials, 2001, 32(3): 227-23.
[46] 吕丽,白书欣,张虹, 等.纤维增强聚合物阻尼预测模型的研究进展[J]. 材料导报, 2005, 19(12): 35-38. LU L,BAI S X,ZHANG H et al. The review of analytical model for predicting the damping of fiber-reinforced polymer composite[J]. Materials Review, 2005, 19(12): 35-38.
[47] BARRETT D J. Damped composite structures [J]. Composite Structure, 1991, 18(3): 283-294.
[48] BIGGERSTAFF J M, KOSMATKA J B. Shear measurements of viscoelastic damping materials embedded in composite plates[A]. Smart Structures and Materials 1999: Passive Damping and Isolation[C]. Newport Beach: Proceedings of the SPIE, 1999. 82-93.
[49] ROBINSON M J, KOSMATKA J E. Embed ding viscoelastic damping materials in low-cost VARTM composite structures[A]. Smart Structures and Materials 2005: Damping and Isolation[C]. Bellingham: Proceedings of the SPIE, 2005. 349-360.
[50] MANTENA P R, GIBSON R F. Dynamic mechanical properties of hybrid polyethylene/graphite composites[J]. Advanced Materials: Looking Ahead to the 21st Century, 1990.370-382.
[51] SARGIANIS J, SUHR J. Core material effect on wave number and vibrational damping characteristics in carbon fiber sandwich composites[J]. Composites Science and Technology, 2012, 72(13): 1493-1499.
[52] TOSHIO T. Smart CFRP materials for application in low-vibration structures[A]. The International Conference on Composite Interfaces[C]. Tokyo: Interface 21, 2012. 1-4.
[53] PAN Li-jian, ZHANG Bo-ming, DAI Fu-hong. Multi-objective optimization of co-cured composite laminates with embedded viscoelastic damping layer[J]. Journal of Materials Science & Technology, 2009, 25(5): 708-712.
[54] 吕丽,白书欣,张虹, 等. 玻璃纤维芯-铅网增强橡胶复合材料动态性能[J]. 复合材料学报,2006,23(6):37-48. LU L,BAI S X, ZHANG H et al. Dynamic properties of glass-fiber-cored lead-net reinforced rubber composite[J]. Acta Materiae Composite Sinica, 2006,23(6):37-48.
[55] 余启勇,马玉瑗,郭万涛, 等. 结构阻尼复合材料及其研究进展[J]. 材料工程,2007, (1): 253-261. YU Q Y,MA Y P,GUO W T. Structural damping composite and its research progress[J]. Journal of Material Engineering, 2007,(1): 253-261.
[56] 杨加明, 张义长, 吴丽娟.多层黏弹性复合材料结构阻尼性能优化设计[J].航空学报,2011, 32(2): 265-269. YANG J M, ZHANG Y C,WU L J. Damping optimization of composite structures with multi-interleaved viscoelastic layers [J]. Acta Aeronautica et Astronautica Sinica, 2011,32(2): 265-269.
[57] 杨加明,钟小丹,赵艳影.复合材料夹杂双层黏弹性材料的应变能和阻尼性能分析[J]. 工程力学, 2010, (3): 133-138. YANG J M, ZHONG X D, ZHAO Y Y. Strain energy and damping analysis of composite laminates with two interleaved viscoelastic layers[J]. Engineering Mechanics, 2010, (3): 133-138.
[58] 杨雪,王源升,朱金华, 等.多层阻尼复合结构阻尼性能[J]. 复合材料学报, 2005, 6(3): 175-181. YANG X, WANG Y S, ZHU J H. Damping properties of the composite structures with multilayered damping materials[J]. Acta Materiae Composite Sinica, 2005, 6(3): 175-181.
[59] 范永忠,孙康,吴人洁.环氧树脂混杂复合材料的阻尼性能研究[J].功能材料,2000, 31(增刊1):94-98. FAN Y Z,SUN K,WU R J. Investigation on the damping properties of hybrid fibers reinforced epoxy resin composite materials[J].Functional Materials, 2000, 31(Suppl 1) : 94-98.
[60] 吴医博,郭万涛,冀冰.一种适用于内嵌阻尼层夹芯复合材料真空辅助成型方法[P]. 中国专利: ZL 201110040105.6, 2011-02-18. WU Y B, GUO W T, JI B. A vacuum assisted resin transfer molding suitable for Sandwich composites inserted with damping layer[P]. Chinese patent, ZL 201110040105.6, 2011-02-18.
[61] 郭万涛, 冀冰, 吴医博.一种结构性高阻尼纤维增强复合材料[P]. 中国专利: ZL 200910172342.0, 2009-09-22. GUO W T, JI B,WU Y B. A structural fiber reinforced composites with high damping properties[P]. Chinese Patent, ZL 200910172342.0, 2009-09-22.
[62] 梁森, 米鹏.嵌入式共固化复合层合材料结构的制作工艺[P]. 中国专利: ZL 20101017721278.8 2010-05-10. LIANG S, MI P. The making craft of embedded co-cured composites with laminated structure[P]. Chinese Patent, ZL20101017721278.8, 2010-05-10.
[63] 益小苏, 刘燕峰, 马宏毅, 等. 一种植物纤维叠层混杂功能性复合材料层合板的制备方法[P]. 中国专利: ZL 201210054309.X,2012-03-02. YI X S, LIU Y F, MA H Y. A kind of preparation methods of plant fiber laminated hybrid functional laminated composites[P]. Chinese Patent:ZL 201210054309.X, 2012-03-02.
[64] 韩俐伟.三元互穿聚合物网络材料阻尼性能研究[J]. 化工新型材料, 2004, 32(8): 22-24. HAN L W. Study on damping nature of ternary IPN[J]. New Chemical Materials, 2004, 32(8): 22-24.
[65] 秦川丽,蔡俊,唐冬雁,等. PU/VER IPN 材料阻尼性能的研究[J]. 材料工程, 2003, (7): 36-40. QIN C L, CAI J, TANG D Y, et al. Study on damping properties of PU/VER IPN[J]. Journal of Materials Engineering, 2003, (7): 36-40.
[66] 王珍, 陈祥宝, 王景鹤. 氢化丁腈橡胶/聚甲基丙烯酸酯互穿聚合物网络研究[J].材料工程, 2009, (12): 1-5. WANG Z, CHEN X B, WANG J H. Interpenetrating polymer networks based on hydrogenated nitrile rubber and polymethacrylate[J]. Journal of Materials Engineering, 2009, (12): 1-5.
[67] SUHR J, KORATKAR N A, YE D X, et al. Damping properties of epoxy films with nanoscale fillers[J]. Journal of Intelligent Material Systems and Structures, 2006, 17(3): 255-260.
[68] 王国杰, 孙宇, 曹春平, 等. 黄麻纤维增强聚氨酯复合材料的拉伸性能研究[J]. 塑料工业, 2012 (8): 21-25. WANG G J, SUN Y, CAO C P, et al. Research on tensile performance of Jute fiber reinforced composites[J]. China Plastics Industry, 2012, (8): 21-25.
[69] JAMES J S, KIM H I, ANDRES E, et al. Sound and vibration damping characteristics in natural material based sandwich composites[J]. Composite Structures, 2013, 96: 538-544.
[70] XU M, FUTABA D N, YAMADA T, et al. Carbon nanotubes with temperature-invariant viscoelasticity from -196 to 1000℃[J]. Science, 2010, 330(6009):1364-1368.
[71] SHAN C, ZHAO W, LU X L, et al. Three-dimensional nitrogen-doped multiwall carbon nanotube sponges with tunable properties[J].Nano Letters, 2013, 13(11): 5514-5520.
[72] PATHAK S, LIM E J, ABADI P, et al Higher recovery and better energy dissipation at faster stain rates in carbon nanotube bundles an in-situ study[J].ACS Nano, 2012, (3): 2189-2197.
[73] HEHR A, SCHULZ M, SHANOV V, et al. Passive damping of carbon nanotube thread[J]. Journal of Intelligent Material Systems Structures, 2013, 25: 713-719.
[74] CHUN K, KIM S, SHI M, et al. Hybrid carbon nanotube yarn artificial muscle inspired by spider dragline silk[J]. Nature Communications, 2014, (5), 3322.
[75] ZENG Y, CI L J, BRENT J C, et al. Design and reinforcement vertically aligned carbon nanotube-based sandwich composites[J]. ACS Nano, 2010, (4): 6798-6804.
[76] LIN R M, LU C. Modeling of interfacial friction damping of carbon nanotube-based nano-composites[J]. Mechanical Systems and Signal Processing, 2010, 24(8): 2996-3012.
[77] FALVO M R, TAYLOR R M, HELSER A, et al. Nanometre-scale rolling and sliding of carbon nanotubes[J]. Nature, 1999, 397: 236-238.
[78] 曾尤, 王函. 纳米炭/环氧树脂复合材料黏弹阻尼性能[J]. 科学通报, 2014, 59(33): 3232-3239. ZENG Y, WANG H. Viscoelastic damping of nano-carbon/epoxy composites[J]. Chinese Science Bulletin, 2014, 59(33): 3232-3239.
[79] SU Y, WEI H, GAO R, et al. Exceptional negative thermal expansion and viscoelastic properties of graphene oxide paper[J]. Carbon, 2012, 50(8):2804-2809.
[80] KORATKAR N. Graphene in composite materials: synthesis, characterization and applications[M]. Lancaster: DEStech Press, 2013.
[81] 石敏先,黄志雄,杨国瑞. PANI-PMN/环氧树脂复合材料的制备[J]. 合成树脂及塑料, 2009, 26(2):31. SHI M X, HUANG Z X,YANG G R. Preparation of PANI-PMN/epoxy resin composites [J].China Synthetic Resin and Plastic, 2009, 26(2): 31.
[82] 程细才. P V D F 复合材料的性能及其制备[J]. 中国陶瓷, 2013, 49(8): 1-5. CHENG X C. Properties and preparation of PVDF composite material[J]. China Ceramics, 2013, 49(8): 1-5.
[83] 吴燕杰,刘军,孟献丰, 等. PZT压电陶瓷纤维的制备及性能研究[J]. 稀有金属材料与工程, 2008, 37(1): 580-583. WU Y J,LIU J,MENG X F,et al. Fabrication and performance of PZT piezoceramic fibers[J]. Rare Metal Materials and Engineering, 2008, 37(1): 580-583.
[84] 郭艳宏,赵小平,陈蓉蓉, 等. 有机小分子DZ改性HTPB型聚氨酯阻尼材料[J].材料导报, 2009, 23(增刊1): 5-10. GUO Y H,ZHAO X P,CHEN R R. Study on modification by DZ on polyether type polyurethane damping material[J]. Materials Review, 2009, 23(Suppl 1): 5-10.
[85] 刘昕晖, 陈塑寰. 聚苯胺体系电流变流体的阻尼机理及阻尼模型研究[J]. 固体力学学报, 2001, (1): 12-25. LIU X H, CHEN S H. Research for the damping and damping model polyaniline electro-rheological fluid[J]. Acta Mechanica Solida Sinica, 2001,(1): 12-25.
[86] 丁新波,张慧萍,晏雄. 杂化材料中有机小分子形态对阻尼性能影响[J]. 材料工程, 2008, (4): 23-27. DING X B, ZHANG H P, YAN X. Effect of the state of organic small molecule in hybrid materials on damping properties[J]. Journal of Materials Engineering, 2008,(4): 23-27.
[87] DUENAS T A, CARMAN G P. Large magnetostrictive response of Terfenol-D resin composites [J]. Journal of Applied Physics, 2000, 87(9): 4696-4701.
[88] SURESH S. Graded materials for resistance to contact deformation and damage[J]. Science, 2001, 292(5526): 2447-2451.
[89] 沈衡,朱唐,梁飞跃, 等. 从低维到高维的仿生材料制备及其应用进展[J].中国材料进展, 2014, 33(4): 201-211. SHEN H, ZHU T, LIANG F Y, et al. Progress in the preparation and application of bio-inspired materials from low to high dimensional structure[J]. Material China, 2014, 33(4): 201-211.
[90] THIELEN M, SPECK T, SEIDEL R. Viscoelasticity and compaction behavior of the foam-like pomelo peel [J]. Journal of Materials Science, 2013, 48(9): 3469-3478.
[91] 苏航. 玻璃空心微珠/Al 多孔材料压缩及阻尼性能研究[D]. 哈尔滨:哈尔滨工业大学, 2013. SU H. Compression and damping properties of glass cenosphere/AL syntactic foams[D]. Harbin: Harbin Institute of Technology, 2013.
[92] 金明江,赵玉涛, 程晓农, 等.玻璃纤维/PC树脂/LY12铝合金叠层复合材料界面处理及其性能[J]. 机械工程材料, 2006, 30(5): 51-55. JIN M J,ZHAO Y T,CHEGN X N. Interfacial-treatment and properties of fiber glass/PC resin/LY12 Al alloy laminated composites[J]. Materials for Mechanical Engineering, 2006, 30(5): 51-55.
[93] 金明江,赵玉涛,戴起勋, 等.泡沫铝/PC树脂/铝合金叠层复合材料的制备与性能研究[J]. 材料科学与工程学报, 2005, 23(4): 585-588. JIN M J,ZHAO Y T, DAI Q X,et al. Study on fabrication and properties of Al foams/PC resin/Al alloy laminated composites[J]. Journal of Materials Science and Engineering, 2005, 23(4): 585-588.
[94] 王翔,刘韩星,欧阳世翕, 等.环氧树脂弹性体的制备及性能研究[J]. 武汉理工大学学报,2008, 27(3): 56-58. WANG X, LIU H X, OUYANG S X. Research on preparation and characterizing of epoxy elastomer[J]. Journal of Wuhan University of Technology, 2008, 27(3): 56-58.
[95] ELASSER M S, DIMONIE V L, SPERLING L H. Morphology design and characterization of IPN-containing structured latex particles for damping applications[J]. Colloids and Surface A: Physiochemical and Engineering Aspects, 1999, 153(1-3): 241-253.
[96] 李法华.功能性橡胶材料及制品[M]. 北京: 化学工业出版社, 2003. 41-46. LI F H. Functional Rubber Materials and Product[M]. Beijing: Chemical Industry Press, 2003. 41-46.
[97] 李明俊, 徐泳文,万诗贵. 各向异性层合阻尼结构理论及其阻尼特性分析[J].南昌航空工业学院学报,2001,15(3) : 1-4. LI M J, XU Y W, WAN S G. A structural theory and its damping analysis of laminated isotropic damped plates[J]. Journal of Nanchang Institute of Aeronautical Technology, 2001, 15(3): 1-4.
[98] FINEGAN I C,GIBSON R D F. Analytical modeling of damping at micromechanical level in polymer composites reinforced with coated fibers [J]. Composites Science and Technology, 2000, 60(7), 1077-1084.
[99] HARGOU K, PINGKARAWAT K, MOURITZ A P, et al. Ultrasonic activation of mendable polymer for self-healing carbon-epoxy laminates[J]. Composites: Part B, 2013, 45(1): 1031-1039.
[100] NI R G, ADAMS R D. The damping and dynamic modulus of symmetric laminated composite beams theoretical and experimental results[J]. Journal of Composite Materials, 1984, 18(2): 104-121.
[101] SARAVANOS D A, CHAMISE C. Computational simulation of damping in composite structures[J]. Journal of Reinforced Plastics and Composites, 1991, 10(3): 256-278.
[102] RIKARDS R, CHATE A, KORJAKIN A. Vibration and damping analysis of laminated composite plates by the finite element method[J]. Engineering Computations, 1995, 12(1): 61-74.
[103] BERTHELOT J M. Damping analysis of laminated beams and plates using the ritz method[J]. Composite Structures, 2006, 74(2): 186-201.
[104] 林松, 徐超, 吴斌. 嵌入多层黏弹性胶膜复合材料阻尼工字梁的多目标设计优化[J]. 计算机辅助工程, 2010, 19(4): 44-49. LIN S,XU C,WU B. Multi-objective design optimization on composite damping 工-shaped beam with co-cured embedded viscoelastic layers[J]. Computer Aided Engineering, 2010, 19(4): 44-49.
[1] 景红霞, 李巧玲, 叶云, 裴王军. 羰基铁/钛酸钡复合材料的制备及吸波性能[J]. 材料工程, 2015, 43(7): 38-42.
[2] 刘伟, 曹腊梅, 王岭, 徐彩虹, 益小苏. RTM成型工艺对Cf/SiBCN陶瓷基复合材料性能的影响[J]. 材料工程, 2015, 43(6): 1-6.
[3] 李敬勇, 刘涛, 郭宇文. 搅拌摩擦加工铝基复合材料的高温摩擦磨损性能[J]. 材料工程, 2015, 43(6): 21-25.
[4] 张勇, 谢卫红, 刘宏伟, 张峰. 聚氨酯蜂窝纸板动力学性能及其本构模型[J]. 材料工程, 2015, 43(5): 27-32.
[5] 李雪爱, 王春生, 韩喜江. 原位化学沉淀法制备Fe3O4-石墨复合材料的吸波性能[J]. 材料工程, 2015, 43(5): 44-49.
[6] 冯宇, 何宇廷, 安涛, 崔荣洪, 邵青, 范超华. 湿热环境对航空复合材料加筋板压缩屈曲和后屈曲性能的影响[J]. 材料工程, 2015, 43(5): 81-88.
[7] 董慧民, 安学锋, 益小苏, 闫丽, 苏正涛, 包建文. 纤维增强聚合物基复合材料低速冲击研究进展[J]. 材料工程, 2015, 43(5): 89-100.
[8] 石晓朋, 李曙林, 常飞, 卞栋梁, 尹俊杰. 复合材料加筋壁板低速冲击响应与冲击能量关系[J]. 材料工程, 2015, 43(4): 53-58.
[9] 马彦, 陈朝辉. 1800℃热处理对PIP法C/SiC复合材料结构和性能的影响[J]. 材料工程, 2015, 43(4): 98-101.
[10] 张响, 陈招科, 熊翔. C/C-SiC复合材料表面ZrB2基陶瓷涂层的制备及高温烧结机理[J]. 材料工程, 2015, 43(3): 1-6.
[11] 刘鹏, 李士凯, 张元彬, 刘燕. 非晶增强铝基复合材料的微观结构及腐蚀性能[J]. 材料工程, 2015, 43(3): 67-71.
[12] 张平, 莫尊理, 张春, 韩立娟, 李政. 磁响应性TiO2/石墨烯纳米复合材料的合成及光催化性能[J]. 材料工程, 2015, 43(3): 72-77.
[13] 杨文彬, 张丽, 刘菁伟, 刘欢锐, 唐兵华. 石墨烯复合材料的制备及应用研究进展[J]. 材料工程, 2015, 43(3): 91-97.
[14] 高禹, 王钊, 陆春, 包建文, 宋恩鹏, 董尚利. 高性能树脂基复合材料典型空天环境下动态力学行为研究现状[J]. 材料工程, 2015, 43(3): 106-112.
[15] 王兵, 谭毅, 施伟, 李佳艳, 尤启凡. 硅蒸镀法制备低密度C/C复合材料表面SiC涂层[J]. 材料工程, 2015, 43(2): 1-6.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn