Effect of Chromium on Solidification Microstructure and Wear Property of High Vanadium Wear-resistant Alloy
YANG Yong-wei1, FU Han-guang1, JU Jiang1, WANG Kai-ming1, LEI Yong-ping1, ZHU Li-long2, JIANG Liang2
1. College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China;
2. Powder Metallurgy Research Institute, Central South University, Changsha 410083, China
Abstract：The equilibrium solidified and the vertical section phase diagrams of Fe-C pseudo-binary were drawn with different chromium content (Fe-3.0%C-10.0%V-0.8%Si-0.8%Mn-X%Cr, X=2.0,5.0,10.0, mass fraction) by the Thermo-Calc software. The effect of chromium on the phase diagrams and solidification microstructure was investigated by OM, SEM, EDS, XRD, DSC and wear resistance test. The results show that the changes of eutectic transition points and phase region area are tiny with the increase of chromium content. The calculated temperatures of precipitated phase are close to the DSC results. The solidification microstructure is composed with α-Fe, MC, and M7C3. Chromium is mainly distributed in α-Fe and M7C3 carbides. With the increase of chromium, the amount of MC decreases and the amount of M7C3 increases; the α-Fe has no change. The hardness of the cast alloy increases with the increase of chromium content, and the maximum value reaches to 67.0HRC when chromium content is 10.0%. The wear loss is about 15.6mg when the chromium content is 5.0%, the wear resistance is the best.
杨勇维, 符寒光, 鞠江, 王开明, 雷永平, 朱礼龙, 江亮. 铬对高钒耐磨合金凝固组织和耐磨性能的影响[J]. 材料工程, 2018, 46(9): 122-130.
YANG Yong-wei, FU Han-guang, JU Jiang, WANG Kai-ming, LEI Yong-ping, ZHU Li-long, JIANG Liang. Effect of Chromium on Solidification Microstructure and Wear Property of High Vanadium Wear-resistant Alloy. Journal of Materials Engineering, 2018, 46(9): 122-130.
[1] 王强,杨涤心,魏世忠,等.高碳高钒系高速钢耐磨材料的现状与发展[J].铸造技术,2004,25(11):876-879. WANG Q, YANG D X, WEI S Z, et al. Investigation of the high carbon high vanadium high speed steel wear-resistance[J]. Foundry Technology, 2004, 25(11):876-879.
[2] 刘亚民,陈振华,郭国庆,等.钒含量对高碳高钒高速钢组织与性能的影响[J].洛阳工学院学报,2002,23(2):8-11. LIU Y M, CHEN Z H, GUO G Q, et al. Effect of vanadium content on the microstructures and properties of high speed steels containing high carbon and vanadium[J]. Journal of Luoyang Institute of Technology, 2002, 23(2):8-11.
[3] MARIN M, DRUGESCU E, POTECASU F, et al. Mechanical properties and abrasive wear behavior of steam treated sintered iron alloys[J]. Metalurgia, 2011, 63(6):15-22.
[4] KAWALEC M. Microstructure of hypereutectic Fe-C-V alloys[J]. Archives of Foundry Engineering, 2011, 11(2):55-60.
[5] 魏世忠,徐流杰,朱金华,等.碳、钒含量对高钒高速钢组织和力学性能的影响[J].钢铁研究学报,2005,17(5):66-71. WEI S Z, XU L J, ZHU J H, et al. Effect of carbon and vanadium content on microstructure and mechanical properties of high vanadium high speed steel[J]. Journal of Iron and Steel Research, 2005, 17(5):66-71.
[6] 魏世忠,倪锋,朱金华,等.高钒铁碳合金的凝固过程[J].钢铁研究学报,2005,17(3):56-59. WEI S Z, NI F, ZHU J H, et al. Solidification process of Fe-C alloy containing rich vanadium[J]. Journal of Iron and Steel Research, 2005, 17(3):56-59.
[7] GOTO K, MATSUDA Y, SAKAMOTO K, et al. Basic characteristics and microstructure of high carbon high speed steel rolls for hot rolling mill[J]. ISIJ International, 1992, 32(11):1184-1189.
[8] 张志刚,牛炎,张学军.铁-铬-铝合金中铬的第三组元作用[J].钢铁研究学报,2007,19(7):46-49. ZHANG Z G, NIU Y, ZHANG X J. Effect of third element Cr in Fe-Cr-Al alloys[J]. Journal of Iron and Steel Research, 2007, 19(7):46-49.
[9] 周宏,王金国,贾树盛,等.轧辊用高碳高速钢系合金的KIC及力学性能[J].钢铁,1997,32(8):59-62. ZHOU H, WANG J G, JIA S S, et al. Study on mechanical properties of high-carbon high speed steel for roll[J]. Iron and Steel, 1997, 32(8):59-62.
[10] FILIPOVIC M, KAMBEROVIC Z, KORAC M. Effect of niobium and vanadium additions on the as-cast microstructure and properties of hypoeutectic Fe-Cr-C alloy[J].ISIJ International, 2013, 53(12):2160-2166.
[11] 向道平,唐建新.Cr/C比及热处理工艺对高铬铸铁抗磨粒磨损性能的影响[J].热加工工艺,2004(5):21-23. XIANG D P, TANG J X. Influence of Cr/C ratio and heat treatment process on abrasive wear resistance of high chromium[J]. Hot Working Technology, 2004(5):21-23.
[12] JESSON D A, MOHEBBI H, FARROW J, et al. On the condition assessment of cast iron trunk main:the effect of microstructure and in-service graphitisation on mechanical properties in flexure[J]. Materials Science and Engineering:A, 2013, 576:192-201.
[13] SPANGEL S, MATTHAEI-SCHULZ E, SCHULZ A, et al. Influence of carbon and chromium content and preform shape on the microstructure of spray formed steel deposits[J]. Materials Science and Engineering:A, 2002, 326(1):26-39.
[14] SUNDMAN B, JANSSON B, ANDERSSON J O. The Thermo-Calc databank system[J]. Calphad,1985,9(2):153-190.
[15] YANG Y W, FU H G, LEI Y P, et al. Phase diagram calculation and analyze on cast high-boron high-speed steel[J]. Journal of Materials Engineering and Performance, 2016, 25(2):409-420.
[16] YAMASHITA T, OKUDA K, OBARA T. Application of Thermo-Calc to the development of high-performance steels[J]. Phase Equilibria, 1999, 20(3):231-237.
[17] KAUFMAN L, TURCHI P E A, HUANG W M, et al. Thermodynamics of the Cr-Ta-W system by combining the Ab initio and CALPHAD methods[J]. Calphad,2001,25(3):419-433.
[18] 苏航,杨才福,柴峰,等.热力学、动力学计算技术在钢铁材料研究中的应用[M].北京:科学出版社,2012:2-49. SU H, YANG C F, CHAI F, et al. The application of thermodynamics and kinetics calculation technology in the iron and steel research[M].Beijing:Science Press, 2012:2-49.
[19] ANDERSSON J O, HELANDER T, HOGLUND L, et al. Thermo-Calc & DICTRA, computational tools for materials science[J]. Calphad,2002,26(2):273-312.
[20] SHIMIZU M, SHITAMURE O, MATSUO S, et al. Development of high performance new composite roll[J]. ISIJ International, 1992, 32(11):1244-1249.
[21] 王金国,周宏,苏源德,等.高碳高钒高速钢的高温硬度及热处理的研究[J].金属热处理,2000(3):22-24. WANG J G, ZHOU H, SU Y D, et al. Research on heat treatment and hot hardness of high speed steel containing high carbon and high vanadium[J]. Heat Treatment of Metals, 2000(3):22-24.
[22] 符寒光,邢建东.高速钢轧辊制造技术[M].北京:冶金工业出版社,2007:73-81. FU H G, XING J D. Roller manufacture of high speed steel[M]. Beijing:Metallurgical Industry Press, 2007:73-81.
[23] 陈平,项欣,李俊玲,等.沟槽型织构摩擦学性能的数值模拟与实验研究[J].材料工程,2016,44(6):31-37. CHEN P, XIANG X, LI J L, et al. Experimental and numerical investigation on tribological performance of grooved texture[J]. Journal of Materials Engineering, 2016, 44(6):31-37.
[24] XU L J, WEI S Z, XING J D, et al. Effects of carbon content and sliding ratio on wear behavior of high-vanadium high-speed steel (HVHSS) under high-stress rolling-sliding contact[J]. Tribology International, 2014, 70:34-41.
2018, Vol. 46 
