Two-stage aging behavior of pulse variable polarity plasma arc welding joint of 7075 aluminum alloy
LI Guo-wei1,2, LIANG Ya-hong1,2, CHEN Fu-rong1,2, HAN Yong-quan1,2
1. School of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot 010051, China;
2. Inner Mongolia Key Laboratory of Light Metal Materials, Hohhot 010051, China
Abstract:Two-stage aging behavior of pulse variable polarity plasma arc welding(PVPPAW)joint of 7075 aluminum alloy with thickness of 10 mm was studied by mechanical properties, electrical conductivity test and TEM analysis, and the reasonable two-stage aging process was determined. Results show that the tensile strength of 7075 aluminum alloy PVPPAW joints increases first and then decreases with the increase of second-step aging temperature and time. After second-step aging with 160℃/12 h, the tensile strength of joint is 545.1 MPa, which increases by 37% than as-weld. And the conductivity is 27.9%IACS, the resistance to stress corrosion is improved than as-weld. The main strengthening phases of the weld center are η' phase and η phase. The precipitated phases of grain interior and grain boundary grow up and become coarsened gradually, and the precipitated free zone in the grain boundary becomes wider with the increase of the second-step aging temperature and time.
[1] KUMAR P V,REDDY G M,RAO K S.Microstructure,mechanical and corrosion behavior of high strength AA7075 aluminum alloy friction stir welds-effect of post weld heat treatment[J].Defence Technology,2015,11(4):362-369.
[2] 杜娟,田辉,陈亚军,等. 7A04铝合金应力腐蚀敏感性及裂纹萌生与扩展行为[J]. 材料工程,2018,46(4):74-81. DU J,TIAN H,CHEN Y J,et al. Susceptibility to stress corrosion and crack initiation and propagation of 7A04 aluminum alloys[J]. Journal of Materials Engineering,2018,46(4):74-81.
[3] 张坤,赵晓东,陈慧琴,等. 温度对Al-Zn-Mg-Cu高强铝合金静态回复力学行为的影响[J]. 航空材料学报,2017,37(3):37-43. ZHANG K,ZHAO X D,CHEN H Q,et al. Influence of temperature on mechanical behavior during static restore processes of Al-Zn-Mg-Cu high strength aluminum alloy[J]. Journal of Aeronautical Materials,2017,37(3):37-43.
[4] CHANG C C,CHEN C L,WEN J Y,et al. Characterization of hot cracking due to welding of high-strength aluminum alloys[J]. Materials and Manufacturing Processes,2012,27(6):658-663.
[5] 栗慧,邹家生,姚君山,等. 2219高强铝合金活性TIG焊工艺[J]. 材料工程,2018,46(4):66-73. LI H,ZOU J S,YAO J S,et al. Activating flux TIG welding technology of 2219 high strength aluminum alloy[J]. Journal of Materials Engineering,2018,46(4):66-73.
[6] NUNES A C,BAYLESS E O,JONES C O,et al.Variable polarity plasma arc welding on the space shuttle external tank[J].Welding Journal,1984,63(9):27-35.
[7] 韩永全,杜茂华,陈树君,等.铝合金变极性等离子弧穿孔焊过程控制[J].焊接学报,2010,31(11):93-98. HAN Y Q,DU M H,CHEN S J,et al.Process control of variable polarity keyhole plasma arc welding for aluminum alloy[J]. Transactions of the China Welding Institution,2010,31(11):93-98.
[8] 康举,栾国红,李光,等.焊接参数对7075铝合金搅拌摩擦焊接头组织及腐蚀行为的影响[J].腐蚀与防护,2011,32(7):507-512. KANG J,LUAN G H,LI G,et al.Effect of processing parameters on microstructure and corrosion behavior of friction stir welded 7075 aluminum alloy[J].Corrosion & Protection,2011,32(7):507-512.
[9] 常丽艳,宋西平,李宏良,等.7075铝合金激光-MIG复合焊接接头组织及性能的分析[J].热加工工艺,2014,43(9):25-28. CHANG L Y,SONG X P,LI H L,et al.Microstructure and mechanical properties of laser-MIG hybrid welded joint of 7075-T6 aluminum alloy[J].Hot Working Technology,2014,43(9):25-28.
[10] 张允康,许晓静,罗勇,等.7075铝合金强化固溶T76处理后的拉伸与剥落腐蚀性能[J].稀有金属材料与工程,2012,41(增刊2): 612-615. ZHANG Y K,XU X J,LUO Y,et al.Tensile property and exfoliation corrosion of 7075 aluminum alloy after enhanced-solid-solution and T76 aging treatment[J].Rare Metal Materials and Engineering,2012,41(Suppl 2):612-615.
[11] STILLER K,WARREN P J,HANSEN V,et al.Investigation of precipitation in an Al-Zn-Mg alloy after two-step ageing treatment at 100℃ and 150℃[J].Materials Science and Engineering:A,1999,207(1):55-63.
[12] NICOLAS M,DESCHAMPS A.Characterisation and modelling of precipitate evolution in an Al-Zn-Mg alloy during non-isothermal heat treatments[J].Acta Materialia,2003,51(20):6077-6094.
[13] 陈一进,江长友,秦克斌,等.双级时效对7050铝合金力学性能及耐腐蚀性的影响[J].金属热处理,2017,42(6):133-136. CHEN Y J,JIANG C Y,QIN K B,et al.Effect of two-step aging on mechanical properties and corrosion resistance of 7050 aluminum alloy[J].Heat Treatment of Metals,2017,42(6):133-136.
[14] 孙志华,刘明辉,张晓云,等.时效制度对Al-Zn-Mg-Cu铝合金应力腐蚀敏感性的影响[J].中国腐蚀与防护学报,2006,26(4):232-236. SUN Z H,LIU M H,ZHANG X Y,et al.Effect of tempered conditions on the stress corrosion cracking of Al-Zn-Mg-Cu alloy[J].Journal of Chinese Society for Corrosion and Protection,2006,26(4):232-236.
[15] 刘长军,刘郑军,阮祥钢,等.焊后热处理对AA7075铝合金DP-MIG焊接接头组织及力学性能的影响[J].焊接学报,2016, 37(10):81-84. LIU C J,LIU Z J,RUAN X G,et al.Effect of post-weld heat treatment on microstructure and mechanical properties of welded joint of 7075 aluminum alloy by double-pulsed metal inert-gas welding process[J].Transactions of the China Welding Institution,2016,37(10):81-84.
[16] WIDENER C A,BURFORD D A,KUMAR B,et al.Evaluation of post-weld heat treatments to restore the corrosion resistance of friction stir welded aluminum alloy 7075-T73vs 7075-T6[J].Materials Science Forum,2007,539/543:3781-3788.
[17] VERHECEN J D.物理冶金学基础[M].卢光熙,赵子伟,译.上海:上海科技出版社,1980:243. VERHECEN J D.The basis of physical metallurgy[M].LU G X,ZHAO Z W, translation.Shanghai:Shanghai Scientific & Technical Publishers,1980:243.
[18] 曾渝,尹志民,潘青林,等.超高强铝合金的研究现状及发展趋势[J].中南工业大学学报(自然科学版),2002,33(6):592-596. ZENG Y,YIN Z M,PAN Q L,et al.Present research and developing trends of ultrahigh strength aluminum alloys[J].Journal of Central South University of Technology(Natural Science),2002,33(6):592-596.