Phosphorus modification of Li-rich and Mn-based Li1.2[Co0.13Ni0.13Mn0.54]O2 cathode material for lithium-ion battery
BAN Li-qing1,2, GAO Min1,2, PANG Guo-yao1,2, BAI Xiang-tao1,2, LI Zhao1,2, ZHUANG Wei-dong1,2
1. General Research Institute for Nonferrous Metals, Beijing 100088, China;
2. China Automotive Battery Research Institute Co., Ltd., Beijing 101400, China
Abstract:The enhanced electrochemical performance of the lithium-rich solid solution Li1.2[Co0.13Ni0.13Mn0.54]O2 (LMNCO) cathode was enhanced by phosphorus incorporation. The various phosphorus contents were introduced by adding NH4H2PO4 into the raw materials. The pristine sample and the sulfur incorporated samples were characterized by X-ray diffraction(XRD), high resolution transmission electron microscopy(HRTEM), electrochemical impedance spectroscopy(EIS). Electrochemical performance was assessed by measuring parameters such as charge and discharge capacity, rate capability in lithium ion cells. The results show that the LMNCOP-03 material has the best initial discharge capacity of 280 mAh·g-1. Moreover, it has about 212.2 mAh·g-1 and 170.6 mAh·g-1 at 1.0 C and 3.0 C rate, respectively. The LMNCOP-03 material shows an improved rate performance attributed to the enhanced electrical conductivity and lithium ion diffusion, which is proved by EIS tests.
班丽卿, 高敏, 庞国耀, 柏祥涛, 李钊, 庄卫东. 富锂锰基Li1.2[Co0.13Ni0.13Mn0.54]O2锂离子正极材料的磷改性研究[J]. 材料工程, 2020, 48(7): 103-110.
BAN Li-qing, GAO Min, PANG Guo-yao, BAI Xiang-tao, LI Zhao, ZHUANG Wei-dong. Phosphorus modification of Li-rich and Mn-based Li1.2[Co0.13Ni0.13Mn0.54]O2 cathode material for lithium-ion battery. Journal of Materials Engineering, 2020, 48(7): 103-110.
[1] LIM J H, CHUNG C G, SUNG Y W, et al. Electrochemical characterization of Li2MnO3-Li[Ni1/3Co1/3Mn1/3]O2-LiNiO2 cathode synthesized via co-precipitation for lithium secondary batteries[J]. Journal of Power Sources, 2009, 189(1):571-575.
[2] 班丽卿,庄卫东,卢华权,等. 层状锂镍钴锰氧化物正极材料的改性研究进展[J]. 稀有金属,2013, 37(5):820-833. BAN L Q, ZHUANG W D, LU H Q, et al. Progress in modification of layered cathode material Li-Ni-Co-Mn-O[J]. Chinese Journal of Rare Metals, 2013, 37(5):820-833.
[3] GUO R, SHI P, CHNEG X, et al. Effect of ZnO modification on the performance of LiNi0.5Co0.25Mn0.25O2 cathode material[J]. Electrochimica Acta, 2009, 54(24):5796-5803.
[4] GAO J, KIM J, MANTHIRAM A. High capacity Li[Li0.2Mn0.54Ni0.13Co0.13]O2-V2O5 composite cathodes with low irreversible capacity loss for lithium ion batteries[J]. Electrochemistry Communications, 2009, 11(1):84-86.
[5] BETTGE M, LI Y, SANKARAN B, et al. Improving high-capacity Li1.2Ni0.15Mn0.55Co0.1O2 based lithium-ion cells by modifying the positive electrode with alumina[J]. Journal of Power Sources, 2013, 233(4):346-357.
[6] LIU Y, NING D, ZHENG L, et al. Improving the electrochemical performances of Li-rich Li1.20Ni0.13Co0.13Mn0.54O2 through a cooperative doping of Na+ and PO43- with Na3PO4[J]. Journal of Power Sources, 2018,375(1):1-10.
[7] MA L, MAO L, ZHAO X, et al. Improving the structural stability of Li-rich layered cathode materials by constructing an antisite defect nanolayer through polyanion doping[J]. Chem Electro Chem, 2017, 4(12):3068-3074.
[8] BAN L Q, YIN Y P, ZHUANG W D, et al. Electrochemical performance improvement of Li1.2[Mn0.54Ni0.13Co0.13]O2 cathode material by sulfur incorporation[J]. Electrochemical Acta, 2015(187):212-218.
[9] CHO J, KIM Y W, KIM B, et al. A breakthrough in the safety of lithium secondary batteries by coating the cathode material with AlPO4 nanoparticles[J]. Angewandte Chemie International Edition, 2003, 42:1618-1621.
[10] LIU H, CHEN C, DU C, et al. Lithium-rich Li1.2Ni0.13Co0.13Mn0.54O2 oxide coated by Li3PO4 and carbon nanocomposite layer as a high performance cathode material for lithium ion batteries[J]. Journal of Materials Chemistry A, 2015, 3(6):2634-2641.
[11] NGOC H V, JONG C I, SANJITH U, et al. Synergic coating and doping effects of Ti-modified integrated layered-spinel Li1.2Mn0.75Ni0.25O2+d as a high capacity and long lifetime cathode material for Li-ion batteries[J]. Journal of Materials Chemistry A, 2018, 6(5):2200-2211.
[12] LIU S, LIU Z, SHEN X, et al. Surface doping to enhance structural integrity and performance of Li-rich layered oxide[J]. Advanced Energy Materials, 2018, 8(31):1802105.
[13] HUANG J, LIU H, HU T, et al. Enhancing the electrochemical performance of Li-rich layered oxide Li1.13Ni0.3Mn0.57O2via WO3 doping and accompanying spontaneous surface phase formation[J]. Journal of Power Sources, 2018, 375(1):21-28.
[14] MU K, CAO Y, HU G, et al. Enhanced electrochemical performance of Li-rich cathode Li1.2Ni0.2Mn0.6O2 by surface modification with WO3 for lithium ion batteries[J]. Electrochimica Acta, 2018, 273:88-97.
[15] LI X, ZHANG K, MITLIN D, et al. Fundamental insight into Zr modification of Li+ and Mn-rich cathodes:combined transmission electron microscopy and electrochemical impedance spectroscopy study[J]. Chemistry of Materials, 2018, 30(8):2566-2573.
[16] 刘祥欢,庄卫东,彭敏,等. 锂离子电池富锂锰基正极材料的研究进展[J].稀有金属, 2017, 41(5):534-552. LIU X H, ZHUANG W D, PENG M, et al. Research progress in Li-rich manganese-based cathode material for Li-ion battery[J]. Chinese Journal of Rare Metals, 2017, 41(5):534-552.