热处理对9Cr13Ni6Co5Be钢组织与硬度的影响

古立新, 金建军, 刘富荣

材料工程 ›› 2005, Vol. 0 ›› Issue (6) : 41-44.

PDF(304 KB)
PDF(304 KB)
材料工程 ›› 2005, Vol. 0 ›› Issue (6) : 41-44.
工艺

热处理对9Cr13Ni6Co5Be钢组织与硬度的影响

  • 古立新, 金建军, 刘富荣
作者信息 +

Effect of Heat Treatment on Microstructure and Hardness of 9Cr13Ni6Co5Be Steel

  • GU Lixin, JIN Jianjun, LIU Furong
Author information +
文章历史 +

摘要

研究了热处理对9Cr13Ni6Co5Be钢组织和硬度的影响。结果表明,9Cr13Ni6Co5Be钢经1020℃淬火,马氏体转变较充分,该钢可获得较高的硬度;350℃以下回火材料的硬度变化不明显,在470℃左右回火,组织中共格析出的金属间化合物Be2Fe,是硬度出现峰值的主要原因。

Abstract

The effect of heat treatment on microstructure and hardness of 9Cr13Ni6Co5Be steel was studied.The results showed that the highest hardness was gained on quenching at 1020℃. The hardness has unconspicuous change after tempering under 350℃. Tempering at about 470℃ the formation of finely dispersed Be2Fe phase which coherent with the matrix was responsible to the peak of hardness of steel.

关键词

热处理 / 显微组织 / 硬度

Key words

heat treatment / microstructure / hardness

引用本文

导出引用
古立新, 金建军, 刘富荣. 热处理对9Cr13Ni6Co5Be钢组织与硬度的影响[J]. 材料工程, 2005, 0(6): 41-44
GU Lixin, JIN Jianjun, LIU Furong. Effect of Heat Treatment on Microstructure and Hardness of 9Cr13Ni6Co5Be Steel[J]. Journal of Materials Engineering, 2005, 0(6): 41-44
中图分类号: TG113   

参考文献

[1] 李春志.电子衍射谱分析中的一种有效方法[J].物理学报,1979,28:314-323.
[2] 林慧国,周人俊.世界钢号手册[M].北京:机械工业出版社,1985.11-12.
[3] 赵振业.合金钢设计[M].北京:国防工业出版社,1999.88-91.
PDF(304 KB)

696

Accesses

0

Citation

Detail

段落导航
相关文章

/