采用固气反应法制备铁氮化合物吸收剂,研究了工艺参数对产物组成、微波电磁参数的影响,既而确定产物中形成较高比例Fe4N的条件。结果表明:在360℃,3h反应条件下,产物中Fe4N质量分数最高,为45%;反应时间不变,产物介电常数随反应温度升高而增加,磁导率则相反;反应温度不变,产物磁导率随反应时间的增加而降低;产物经分散处理后制得的吸波材料反射率优于处理前,在11.67GHz处,可达-11.18dB。
Abstract
The nitriding particles were synthesized by the solid-gas reaction method. The effects of the process parameters on the products were investigated to obtain more Fe4N. The results show that more Fe4N (45%) is gained at 360℃, 3h. When nitriding time keeps constant, the permeability increases as increasing temperatures, while the permittivity reverses. When nitriding temperature keeps constant, the permittivity fall as increasing the time. The absorbing properties become better by mean of dispersion and the reflectivity reach -11.18 at 11.67GHz.
关键词
铁氮化合物 /
吸收剂 /
电磁参数
{{custom_keyword}} /
Key words
Fe-N compound /
absorber /
electromagnetic parameter
{{custom_keyword}} /
中图分类号:
TM25
{{custom_clc.code}}
({{custom_clc.text}})
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 罗发,周万城,焦恒,等.高温吸波材料研究现状[J].宇航材料工艺,2002,(1):8-11.
[2] 邢丽英.隐身材料[M].北京:化学工业出版社,2004.
[3] 佐藤敏郎.Basic investigation of a magnetic/dielectric multilayered transmission-line device[J].日本应用磁气学会志,1998,22(3):133-138.
[4] JACK K H.The iron-nitrogen system:the preparation and the crystal structures of nitrogen-austenite and nitrogen-martensite[J].Proc Roy Soc A,1951,(8):200-204.
[5] WU X L,ZHONG W,JIANG H Y,et al.Magnetic properties and thermal stability of γ'-Fe4 N nanoparticles prepared by a combined method of reduction and nitriding[J].Journal of Magnetism and Magnetic Materials,2004,281:77-81.
[6] AKIMASA SAKUMA.Electronic and magnetic structure of iron nitride,Fe16 N2 (invited)[J].Applied Physics,1996,79(8):5570-5575.
[7] 周桂琴,连法增,高强.体状Fe3N和Fe2N化合物合成及其磁特性研究[J].金属功能材料,1998,5(8):158-160.
[8] LIU Jun-you,ZHANG Qi,YU Hang-jiang,et al.Magnetic properties of the ising ferromagnetic iron nitride systerm[J].Journal of Magnetism and Magnetic Materials,2004,288:48-53.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}