添加Y对Mg-3.5%Li合金冲击变形行为的影响

PDF(2700 KB)

材料工程 ›› 2010, Vol. 0 ›› Issue (7) : 64-67.

扫码查看或转发全文

论文

添加Y对Mg-3.5%Li合金冲击变形行为的影响

沙桂英, 刘翠云, 刘腾, 孙晓光, 李根

作者信息 +

Effect of Y Addition on Impact Deformation Behavior of Mg-3.5%Li Alloy

SHA Gui-ying, LIU Cui-yun, LIU Teng, SUN Xiao-guang, LI Gen

Author information +

文章历史 +

摘要

利用Hopkinson压杆技术对Mg-3.5%Li及Mg-3.5%Li-0.77%Y合金在不同应变率下进行了冲击压缩实验,分析了两种合金的动态应力-应变行为及其应变率效应。结果表明,随应变率提高,Mg-3.5%Li合金的应力-应变行为表现出应变率强化效应与应变率弱化效应的双重特性。添加稀土元素Y后,合金有所强化,但其应力-应变行为仍具有应变率弱化效应,随应变率提高产生的微裂纹引起的内部损伤是导致合金应变率弱化效应的主要原因。

Abstract

The impact compression experiments for Mg-3.5%Li alloy and Mg-3.5%Li-0.77%Y alloy were carried out at different strain rates with the Split Hopkinson Pressure Bar.The dynamic stress-strain behavior and strain rate effect of the alloys were analyzed.Results showed that dynamic stress-strain curves of the Mg-3.5%Li alloy exhibited positive and subsequent negative strain rate effect with the increase of strain rates.The alloy was strengthened by the addition of Y,but the dynamic stress-strain behavior of the alloy still exhibits negative strain rate effect.This behavior was attributed to inner damage of the Mg-3.5%Li-0.77%Y alloy caused by the micro-crack with the increase of strain rates.

导出引用

沙桂英, 刘翠云, 刘腾, 孙晓光, 李根. 添加Y对Mg-3.5%Li合金冲击变形行为的影响[J]. 材料工程, 2010, 0(7): 64-67

SHA Gui-ying, LIU Cui-yun, LIU Teng, SUN Xiao-guang, LI Gen. Effect of Y Addition on Impact Deformation Behavior of Mg-3.5%Li Alloy[J]. Journal of Materials Engineering, 2010, 0(7): 64-67

中图分类号： TG146.2 TG113

参考文献

[1] 焦彤,张宝玶,张海涛,等.钨合金模拟弹侵彻钢板的实验效应与细观响应分析[J],有色金属,2000,52(4):87-91.
[2] MAGNESS L S.Properties and Performance of Kinetic Energy Penetrator Materials[A],Proceedings of the First International Conference on Tungsten and Tungsten Alloys[C],Arlington VA,USA:Metal Powder Industries Federation,1992.15-22.
[3] MAGNESS L S.High strain rate deformation behaviors of kinetic energy penetrator materials during ballistic impact[J],Mechanics of Materials,1994,17:147-154.
[4] 魏志刚,李永池,李剑荣,等.冲击载荷作用下钨合金材料绝热剪切带形成机理[J],金属学报,2000,36(12):1263-1266.
[5] 张瑞林.固体与分子经验电子理论[M],长春:吉林科学技术出版社,1992.1.
[6] 丛美华,黄德武,段占强,等.小口径穿甲试验靶板弹孔和残余弹体显微组织研究[J],北京理工大学学报,2002,22(5):594-598.
[7] 段占强,程国强,李守新,等.高速冲击下钢板的微观组织及绝热剪切带[J],金属学报,2003,39(5):489-493.
[8] 许沭华,胡时胜,王肖钧.预扭转钨合金杆弹侵彻能力的实验研究[J],弹道学报,1999,11(3):24-28.
[9] 刘志林.合金价电子结构与成分设计[M],长春:吉林科学技术出版社,1990.52.
[10] 朱张校,郑明新.工程材料[M],北京:清华大学出版社,2001.100.
[11] 李金泉,黄德武,段占强,等.高速侵彻装甲钢绝热剪切带特性研究[J],弹道学报,2003,15(3):89-91.
[12] 崔忠圻.金属学与热处理[M],北京:机械工业出版社,1995.