Journal of Materials Engineering

Figure/Table detail

Research progress in tribological properties of high entropy alloys

Yuan YU, Zhuhui QIAO, Haibo REN, Weimin LIU

Journal of Materials Engineering, 2022, 50(3): 1-17. DOI: 10.11868/j.issn.1001-4381.2021.000823

Fig.2 Effect of surface nitriding on wear behaviors of Ni₄₅(CoCrFe)₄₀(AlTi)₁₅ alloy^[87] (a)cross section of the nitrided layers; (b)SEM image of nitrided HEAs layers; (c)hardness-depth profile; (d)wear rates of as-cast and nitrided HEAs

Other figure/table from this article

Table 1 Effect of modified metallic elements on tribological properties of high entropy alloys
Table 2 Effect of modified non-metallic elements on tribological properties of high entropy alloys
Fig.1 Self-lubricating mechanism of FeCoCrNiAl/GNP composites^[83] (a)wear form; (b)wear mechanism; (c)COF and wear rate
Table 3 Effects of heat treatment and surface engineering techniques on tribological properties of high entropy alloys
Fig.3 Effect of high current pulsed electron beam on surface microstructure (a) and tribological properties (b) of CoCrFeNiMo_0.2 alloy^[93]
Fig.4 Wear and lubrication mechanism of high entropy alloy/Si₃N₄ ^[115](a) and high entropy alloy/SiC^[116] (b) pairs in 90% H₂O₂ solution

模态框（Modal）标题

Figure/Table detail