Please wait a minute...
 
材料工程  2018, Vol. 46 Issue (7): 94-99    DOI: 10.11868/j.issn.1001-4381.2016.001470
  研究论文 本期目录 | 过刊浏览 | 高级检索 |
基体表面粗糙度对热丝TIG堆焊Inconel625组织和耐腐蚀性能的影响
王匀, 陈英箭, 许桢英, 唐书浩
江苏大学 机械工程学院, 江苏 镇江 212013
Effect of Surface Roughness of AISI8630 on Microstructure and Corrosion Resistance of Inconel625 Cladding Layer by Using Hot-wire TIG
WANG Yun, CHEN Ying-jian, XU Zhen-ying, TANG Shu-hao
School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013, Jiangsu, China
全文: PDF(2545 KB)   HTML()
输出: BibTeX | EndNote (RIS)      
摘要 基体表面粗糙度对堆焊层组织和性能有着深刻的影响。采用热丝TIG在AISI8630表面堆焊Inconel625,研究基体表面粗糙度对堆焊层组织和耐腐蚀性能的影响。应用OM,EDS及SEM等对堆焊层的元素分布以及显微组织进行分析,采用失重法测定堆焊层腐蚀速率。结果表明:随着基体粗糙度值的减小,堆焊过程的陷光效应相应减弱,堆焊稀释率降低。堆焊层中铁元素含量随之减少,显微组织更加细化,分布更加均匀。当基体粗糙度值由12.5μm减小到0.4μm时,堆焊层耐腐蚀性能提高32%。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
王匀
陈英箭
许桢英
唐书浩
关键词 粗糙度堆焊稀释率微观组织耐腐蚀性能    
Abstract:Surface roughness has a profound influence on the microstructure and properties of cladding layer. Clad Inconel625 on AISI8630 surface by using hot-wire TIG and the effect of surface roughness of AISI8630 on microstructure and corrosion resistance was studied. The microstructure and distribution of Fe element of cladding layer were analyzed by means of optical microscope (OM), energy dispersive spectroscopy (EDS), and scanning electron microscopy (SEM). Mass loss method was carried out to determine the corrosion ratio. The results indicate that with the reduction of surface roughness, the light trapping effect, dilution ratio and Fe content are all reduced and the grains become finer and are distributed more uniformly. When the surface roughness is decreased from 12.5μm to 0.4μm, the corrosion resistance of cladding layer is improved by more than 32%.
Key wordsroughness    cladding    dilution ratio    microstructure    corrosion resistance
收稿日期: 2016-12-08      出版日期: 2018-07-20
中图分类号:  TG455  
通讯作者: 王匀(1975-),男,教授,博导,主要研究方向为海工装备制造和激光加工,联系地址:江苏省镇江市江苏大学机械工程学院(212013),E-mail:wangyun@ujs.edu.cn     E-mail: wangyun@ujs.edu.cn
引用本文:   
王匀, 陈英箭, 许桢英, 唐书浩. 基体表面粗糙度对热丝TIG堆焊Inconel625组织和耐腐蚀性能的影响[J]. 材料工程, 2018, 46(7): 94-99.
WANG Yun, CHEN Ying-jian, XU Zhen-ying, TANG Shu-hao. Effect of Surface Roughness of AISI8630 on Microstructure and Corrosion Resistance of Inconel625 Cladding Layer by Using Hot-wire TIG. Journal of Materials Engineering, 2018, 46(7): 94-99.
链接本文:  
http://jme.biam.ac.cn/CN/10.11868/j.issn.1001-4381.2016.001470      或      http://jme.biam.ac.cn/CN/Y2018/V46/I7/94
[1] 郭必永. ASTM4130自动氩弧堆焊Inconel625焊接工艺[J]. 石油化工设备,2014, 43(8):44-46. GUO B Y. Procedure of Inconel625 overlay weld on ASTM 413075K[J]. Petro-chemical Equipment, 2014, 43(8):44-46.
[2] BALA Y G, SANKARANARAYANAN S R, PANDEY K S. Assessment of densification and mechanical property of AISI 8630 steel composition on different heat treatments produced through hot upsetting powder preform forging[J]. Assessment of Densification and Mechanical Property, 2015,21:1044-1053.
[3] 郭龙龙,郑华林,李悦钦,等. 热丝脉冲TIG堆焊Inconel625的组织及性能[J]. 中国表面工程,2016,29(2):77-84. GUO L L, ZHENG H L, LI Y Q, et al. Microstructure and performance of Inconel625 cladding deposited by hot wire pulsed TIG[J]. China Surface Engineering, 2016, 29(2):77-84.
[4] 赵吉宾, 王志国, 赵宇辉, 等. 真空热处理对激光近净成形In625和C-276合金性能的影响[J]. 材料工程, 2016, 44(3):28-34. ZHAO J B, WANG Z G, ZHAO Y H, et al. Influence of vacuum heat treatment on properties of laser engineered net shaping In625 and C-276 alloy[J]. Journal of Materials Engineering, 2016, 44(3):28-34.
[5] ABIOYE T E, MCCARTNEY D G, CLARE A T. Laser cladding of Inconel625 wire for corrosion protection[J]. Journal of Materials Processing Technology, 2015, 217:232-240.
[6] ZAREIE RAJANI H R, AKBARI MOUSAVI S A A, MADANI SANI F. Comparison of corrosion behavior between fusion cladded and explosive cladded Inconel625/plain carbon steel bimetal plates[J]. Materials & Design, 2013, 43:467-474.
[7] ABIOYE T E, FARAYIBI P K, MCCARTNEY D G, et al. Effect of carbide dissolution on the corrosion performance of tungstencarbide reinforced Inconel625 wire laser coating[J]. Journal of Materials Processing Technology, 2016, 231:89-99.
[8] SHAKIL M, AHMAD M, TARIQ N H, et al. Microstructure and hardness studies of electron beam welded Inconel625 and stainless steel 304L[J]. Vacuum, 2014,110:121-126.
[9] XU F J, LV Y H, LIU Y X, et al. Effect of heat treatment on microstructure and mechanical properties of Inconel625 alloy fabricated by pulsed plasma arc deposition[J]. Physics Procedia, 2013, 50:48-54.
[10] VERDI D, GARRIDO M A MUNEZ C J, et al. Mechanical properties of Inconel625 laser cladded coatings:depth sensing indentation analysis[J]. Materials Science and Engineering:A, 2014, 598:15-21.
[11] 徐富家,吕耀辉,刘玉欣,等. 脉冲等离子弧快速成形Inconel625组织性能研究[J]. 材料工程,2012(11):6-11. XU F J, LU Y H, LIU Y X, et al. Microstructure and mechanical properties of Inconel625 components deposited by pulsed plasma arc rapid prototyping[J]. Journal of Materials Engineering, 2012(11):6-11.
[12] VOROBYEV A Y, GUO C L. Effects of nanostructure-covered femtosecond laser-induced periodic surface structures on optical absorptance of metals[J]. Appl Phys A, 2007, 86(3):321-324.
[13] 黄永光,刘世炳. Ti-6Al-4V合金表面微纳米结构的超快激光制备及其反射光谱响应[J]. 中国激光,2009,36(12):3133-3137. HUANG Y G, LIU S B. Preparation and reflection spectra response of Ti-6Al-4V alloy surface with ultrafast laser micro-nano-structuring[J]. Chinese J Lasers, 2009, 36(12):3133-3137.
[14] DOBRZANSKI L A, DRYGALA A, GOLOMBEK K, et al. Laser surface treatment of multicrystalline silicon for enhancing optical properties[J]. J Mater Process Tech, 2008, 201(1/3):291-296.
[15] VOROBYEV A Y, GUO C L. Femtosecond laser blackening of platinum[J]. J Appl Phys, 2008, 104(5):053516.
[16] GUO C L, VOROBYEV A Y. Black metals produced by femtosecond laser pulses[J]. AIP Conference Proceedings, 2010, 1278:838-842.
[17] YANG Y, YANG J J, LIANG C Y, et al. Ultra-broadband enhanced absorption of metal surfaces structured by femtosecond laserpulses[J]. Opt Express, 2008,16(15):11259-11265.
[18] 郭龙龙,郑华林,刘振平,等. 考虑重合率的热丝TIG堆焊Inconel625成形质量研究[J]. 热加工工艺,2015(21):230-233. GUO L L, ZHENG H L, LIU Z P, et al. Investigation on formation quality of overlay beads Inconel625 considering overlap ratio by using hot-wire TIG[J]. Hot Working Technology, 2015(21):230-233.
[19] LI R F, LI Z G, HUANG J, et al. Dilution effect on the formation of amorphous phase in the laser cladded Ni-Fe-B-Si-Nb coatings after laser remelting process[J]. Applied Surface Science, 2012, 258(20):7956-7961.
[20] 张洪旺,刘刚,黑祖昆,等. 表面机械研磨诱导AISI304不锈钢表层纳米化[J]. 金属学报,2003, 39(4):342-346. ZHANG H W, LIU G, HEI Z K, et al. Surface nanocrystallization of AISI 304 stainless steel induced by surface mechanical attrition treatment[J]. Acta Metallurgica Sinica, 2003, 39(4):342-346.
[21] 王晓军, 杨洁. 30CrMo合金表面堆焊Inconel625镍基合金的耐腐蚀性能[J]. 腐蚀与防护, 2011, 32(8):655-657. WANG X J, YANG J. Corrosion resistance of 30CrMo alloy with surfacing welding of Inconel625 nickel alloy in hydrogen sulfide saturated solution[J]. Corrosion & Protection, 2011, 32(8):655-657.
[1] 赵强, 祝文卉, 邵天巍, 帅焱林, 刘佳涛, 王冉, 张利, 梁晓波. Ti-22Al-25Nb合金惯性摩擦焊接头显微组织与力学性能[J]. 材料工程, 2020, 48(6): 140-147.
[2] 毛杰, 马景涛, 邓畅光, 邓春明, 宋进兵, 刘敏, 宋鹏. 表面粗糙度对PS-PVD YSZ陶瓷层性能的影响[J]. 材料工程, 2020, 48(5): 144-150.
[3] 代晓腾, 马鸣龙, 张奎, 李永军, 袁家伟, 刘小稻, 王胜青. Ce对铸态Mg-6Zn合金组织与导热性能的影响[J]. 材料工程, 2020, 48(1): 92-97.
[4] 陈航, 弭光宝, 李培杰, 王旭东, 黄旭, 曹春晓. 氧化石墨烯对600℃高温钛合金微观组织和力学性能的影响[J]. 材料工程, 2019, 47(9): 38-45.
[5] 曾威, 毛杰, 马景涛, 邓畅光, 邓子谦, 邓春明, 宋鹏. 表面粗糙度对PS-PVD热障涂层陶瓷层沉积的影响[J]. 材料工程, 2019, 47(8): 161-168.
[6] 欧阳佩旋, 弭光宝, 李培杰, 何良菊, 曹京霞, 黄旭. NiCrAl/YSZ/NiCrAl-B.e复合涂层对α+β型高温钛合金燃烧产物的影响[J]. 材料工程, 2019, 47(5): 43-52.
[7] 薛子明, 雷卫宁, 王云强, 钱海峰, 李奇林. 超临界条件下脉冲占空比对石墨烯复合镀层微观结构和性能的影响[J]. 材料工程, 2019, 47(5): 53-62.
[8] 唐文珅, 杨新岐, 李胜利, 李会军. 焊接参数对铁素体不锈钢搅拌摩擦焊接头组织及性能的影响[J]. 材料工程, 2019, 47(5): 115-121.
[9] 闫钊鸣, 张治民, 杜玥, 张冠世, 任璐英. 均匀化处理对Mg-13Gd-3.5Y-2Zn-0.5Zr镁合金组织和力学性能的影响[J]. 材料工程, 2019, 47(5): 93-99.
[10] 张晓颖, 荣新山, 徐吉成, 周向同, 吴智仁. 玄武岩纤维表面改性对生物膜附着性能的影响[J]. 材料工程, 2019, 47(5): 129-136.
[11] 黄利, 黄光杰, 吴晓东, 曹玲飞, 李佳. 预处理工艺对双辊铸轧3003铝合金再结晶行为的影响[J]. 材料工程, 2019, 47(4): 135-142.
[12] 任德均, 李锐, 王明连, 刘九山. 磁场对磁流变弹性体表面特性的影响[J]. 材料工程, 2019, 47(3): 79-86.
[13] 臧金鑫, 陈军洲, 伊琳娜, 汝继刚. 时效工艺对2124铝合金厚板组织与性能的影响[J]. 材料工程, 2019, 47(12): 98-103.
[14] 王瑶, 赵雪妮, 党新安, 杨璞, 魏森森, 张伟刚, 刘庆瑶. 钢表面梯度结构耐腐蚀铝涂层的制备及研究[J]. 材料工程, 2019, 47(11): 148-154.
[15] 王盈辉, 王快社, 王文, 彭湃, 车倩颖, 乔柯. 转速对铝铜异种材料水下搅拌摩擦焊接接头组织与性能的影响[J]. 材料工程, 2019, 47(11): 155-162.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
版权所有 © 2015《材料工程》编辑部
地址:北京81信箱44分箱 邮政编码: 100095
电话:010-62496276 E-mail:matereng@biam.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn